Used Mini Milling Machine for sale (87,830)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim Ledpfow I Uinex Ah Ujak

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Milling machine, table milling machine, milling unit Manufacturer: Lazzari Laodpfx Ahex E Ahhs Usk Model: Base 45 Year of manufacture: 1996 Tiltable Motor: 4 kW Speed: 3,000 - 10,000 rpm Left/right rotation

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Control panel on top Laedpox Eyh Eefx Ah Ujk Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/9000 rpm Height adjustment approx. 150 mm Required space approx. 1300 x 1100 mm Weight approx. 850 kg Further technical data available on request All data taken from a brochure; therefore, all information is without guarantee.

Condition: used, Year of construction: 2000, functionality: fully functional, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X850 Y290 Z475 mm. Table size: 1250 x 280 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 7,5 HP. Digital readout: Electronica EL403M (X, Y & Z) Lajdox Ex Sispfx Ah Ujk Year: 2000 Country of origin: Spain. Size (L x W x H): 2050 x 2220 x 2050 mm. Weight: 1900 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout. With Hurré milling head and supports. All our machines are tested and serviced before delivery.

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Lajdeupiypopfx Ah Ujk Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Tilting Spindle Moulder SCHNEIDER SH 1/2 Very good condition, the machine comes from an assembly company and was only used for modification work. In recent years it was no longer needed, which is why it is now for sale. Everything works perfectly. All bearings and guides are OK. Year of manufacture: 1990 The machine features an upper-mounted control panel. Both stop jaws on the fence can be adjusted in depth, enabling jointing operations, e.g., when producing a glue joint profile. Equipped with spindle lock via lever. Lajdpox Ncuvofx Ah Ujk Very efficient chip extraction with 2 x 120mm extraction ports, one on the fence and one on the machine table. Fitted with a 30mm spindle, infinitely tiltable from -5 to 45°, spindle tilting is operated via a handwheel with a highly accurate mechanical dial indicator. With clockwise/counterclockwise rotation. We offer personal delivery and demonstration throughout Germany for €220.00, so you have no risk when purchasing. Shipping to Austria and the rest of the EU is available on request. Features a large table opening, which can be reduced with various rings (allows for safe routing with small cutters and usage of very large diameter tooling). Selectable spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Maximum cutter diameter: approx. 280mm. Spindle height adjustment also via handwheel; includes a highly accurate mechanical dial indicator. Table is made of heavily ribbed cast iron. Interchangeable spindle (a 40mm spindle can also be fitted). Very robust and durable construction, designed for the heaviest routing tasks, suitable for all routing applications. Optimal power transmission via V-belt drive. Includes operating manual. Comes with a 3-roller power feeder ELU Type MVA 34, feed speed is infinitely adjustable from 3 to 23 m/min. Power feeder offers right/left rotation; feed rollers are individually mounted. Machine table dimensions: 1150mm wide x 840mm deep. Machine is ready for immediate operation. 380V, 4900 and 5800W via the two-speed motor. Approximate machine weight: 850kg. Equipped with motor protection switch against overload. Professional-grade, not DIY store quality. Optimal, simple, fast, and safe operation.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet Lsdpsxzzlhsfx Ah Ueak - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Laedpfxox Iugue Ah Uek Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, Year of construction: 2005, machine/vehicle number: 52-610-329, PCI Scemm Meteor 5 V6.1 4-Axis Horizontal Machining Center Ledpfsxx Aq Hjx Ah Usak X/Y/Z 630mm, spindle 15.000rpm / HSK-63-A, A-Axis swivelling table, CNC SIEMENS SINUMERIK 840 D

Condition: ready for operation (used), Year of construction: 1972, Deckel FP1 tool milling machine, swiveling angular table, MK 4 spindle taper. Accessories: tailstock support, various collets. The machine is in operational condition and can be demonstrated under power by arrangement. Laedpex Nclnefx Ah Ujk

Year of construction: 2020, condition: like new (used), - Second-hand machine, as good as new - 3/5-axis CNC portal milling machine with single table and fixed crossbeam - Control: Heidenhain TNC 640 HSCI Travels for machining: - X- machine table 6.000 mm - Y- milling unit 4.400 mm - Z- ram 1.500 mm - C-axis in ram [RAM], endless rotation n x 360°. Machine table: - Length 5,500 mm Laodpeiux Dzsfx Ah Uek - Width 3.000 mm - Table load 40,000 kg (max.) - Table surface over floor 200 mm - 1 straightening T-slot according to DIN 650 28H8 mm - T-slots according to DIN 650 28H12 mm - Center distance of the T-slots 250 mmn - Position of the clamping T-slots crosswise Portal passage: - Distance between clamping surface and max. 2,300 mm Bottom edge of slide interface min. 800 mm - Machine passage in height, approx. 2,200 mm - Machine passage in width, approx. 3,500 mm Travel speeds: - X-axis max. 30,000 mm/min. - Y-axis max. 30.000 mm/min. - Z-axis max. 15.000 mm/min. - A-axis max. 12 rpm - C-axis max. 12 rpm - Acceleration linear axes max. 1,5 m/sec2 Dimensions: - Total length approx. 15,200 mm - Total width approx. 9,950 mm - Total height, floor level to RAM upper edge approx. 6,950 mm

Condition: like new (used), Year of construction: 2003, Chain Mortiser PROTOOL CMP 150 + CMP 145 Guide System Very good condition, the machine was only used privately for the renovation of several old houses, with hardly any signs of wear. Identical models available from HOLZ HER, FESTOOL, and HEMA. Extremely robust and durable. Precise spindle runout and impeccable milling pattern. Accurate column guidance and torsion-resistant guide frame with depth stop. The machine is ready for immediate operation. Comes with a side stop on the guide frame, adjustable quickly and accurately via a scale. The chain mortiser is supported by a gas pressure spring, ensuring optimal upward and downward movement. Constant speed even under heavy load. Equipped with a high-performance motor (virtually no signs of fatigue). Professional-grade tool, not DIY store quality. Lodsx Nctrepfx Ah Ujak Long service life thanks to soft start. All guides and adjustment options are very precise. Bearings are in good condition. The machine is suitable for heavy-duty milling in continuous operation. Good visibility of the milling chain. A wide range of mortising and slotting chains and additional guide systems is available for this machine. Very easy installation of the chain mortiser into the guide frame. Secure guidance thanks to the precise side stop. Very accurate plunging possible due to precision-ground guide rods. Side stop is continuously adjustable from 0 mm to 150 mm. For chains up to 150 mm length. The chain fitted in the machine is 28 x 40 x 100 mm, sharpened and complete; the entire milling set is in good condition. 220 V, 2000 W 4250 rpm Functions perfectly.

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Lasdpfx Ajxg Rxbsh Ujk

Condition: reconditioned (used), Year of construction: 2004, Universal Tool Milling Machine Make: KUNZMANN Model: WF 610 MC Year of manufacture: 2017 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 610648 Machine hours: approx. 2,100 hours machine on approx. 7,200 hours control on approx. 500 hours program run approx. 360 hours axes approx. 450 hours spindle S1 approx. 5 hours hydraulics with warranty Geometry inspection with test protocol Equipment/Accessories: - Path control HEIDENHAIN TNC 620 - Electronic handwheel HEIDENHAIN HR 510 FS, new - Oriented spindle stop, vertical and horizontal with thread cutting cycle without compensation chuck - Preparation set for touch probe TS 260 with mounting taper on operator panel and spindle lock - Touch probe Heidenhain TS 260 - Fixed table 800 x 425 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard enclosure, traversable, electrically secured - Left side window of splash guard enclosure removable, electrically secured - Control panel on machine base Lasdex H Nmaepfx Ah Usk - Operating manual Used as seen The machine is technically in accordance with the standard of its year of manufacture.

Condition: used, Year of construction: 2005, machine/vehicle number: 52-610-370, PCI Scemm Meteor 5 V6.1 4-Axis Horizontal Machining Center Laodpfxjxx Apij Ah Ujk X/Y/Z 630mm, spindle 15.000rpm / HSK-63-A, B-Axis rotary table, CNC SIEMENS SINUMERIK 840 D

Condition: ready for operation (used), Year of construction: 1973, Deckel FP2 tool milling machine with 3-axis digital readout. The machine is in operational condition. Rigid table, SK 40 spindle taper. Accessories: various collets and milling arbors, tailstock support, vise, operating manual. Defects: one axis of the digital readout does not count, table has breakouts. Can be demonstrated under power by arrangement. Ljdpfex Nclhjx Ah Ueak

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Lsdpexzuz Nefx Ah Uoak Control Heidenhain 355 weight max. 10 t ja more pictures available

Year of construction: 2000, condition: ready for operation (used), Control Unit Brand Andronic Ljdpfxsx D Dymo Ah Ujak Model 2000 Main Drive Spindle speed range 25000 rpm Number of axis 3 Additional Equipment Scraper belt conveyor with discharge height 1200 mm Temperature stabilization switch cabinet with high-performance cooling unit This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine Lasdpjibd Alefx Ah Usk with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: used, Year of construction: 2000, machine/vehicle number: 5184, Danobat Danocenter NA-750 CNC Turning + Milling Center Ledpfjxx Admox Ah Ueak max swing 700mm, X/Y 255/520mm, 12-Pos-Upper-Tool-Turret and 8-Pos-Lower-Tool-Turret with driven tooling, Measuring Head, Tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15to

Year of construction: 1991, condition: ready for operation (used), Control Unit Laodpfx Ajx D Humjh Ujk Brand HEIDENHAIN Model TNC 415 This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Milling

Condition: used, Year of construction: 2005, machine/vehicle number: 6538, Horkos MOH 5-Axis Oil Hole Drilling Machine X/Y/Z 500/150/765mm, B-Axis rotary table with A-Axis unit for part size 630 x dia 190mm, spindle 8.000rpm / HSK-63-A, 12-Pos-ATC, LxW xH, CNC GE-FANUC 160i-MB, LxWxH,ca. 2x4x3m Laedpfxsxxz Spj Ah Uok

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Milling Lsdpfox D E U Sex Ah Ueak

Year of construction: 1994, condition: ready for operation (used), General Data Machine weight 12000 kg Lodpfx Ahex D Iaqj Uoak Control Unit Brand HEIDENHAIN Model TNC415 This 3-axis Zayer ZF 2000 gantry milling machine was manufactured in 1994. It features a robust table clamping surface of 2000 × 800 mm, with longitudinal, transverse, and vertical travels of 1703 mm, 803 mm, and 863 mm respectively. It supports a maximum table load of 6000 kg and offers rapid traverse rates up to 15,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Zayer ZF 2000 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Lodpfx Ahjx D Hcwj Usak Control Unit Brand SIEMENS Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling