Used Mist Extraction for sale (5,192)

Condition: used, Year of construction: 2023, functionality: fully functional, For sale due to purchase of a larger system! Was only in operation for 1 year and was covered with cardboard. See photos. Cjdpfxextucde Adasri

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality paint mist extraction wall including exhaust air system. The paint mist extraction wall was only used for a short period and therefore has very low operating hours. It is in an as-new condition and is technically and visually flawless. Technical specifications: - Fan: Frequency-controlled, free-standing Codpfoxrybvjx Adajri - Airflow: 5,000 m³/h to 9,700 m³/h - Motor: 2.2 kW, 230 V, 4.6 A - Dimensions (W x H x D): 3,000 x 1,700 x 500 mm - Material: Housing made of galvanized sheet steel - Filtration: - Pleated paper filter (primary filtration, at least 92% separation rate) - Glass fiber filter mat (secondary filtration) Exhaust air guidance: - DN 450 duct components for roof routing with deflector hood included Details: - Quantity: 1 - Year of manufacture: 2019 - Condition: As new - Collection only The pre-owned item offered is sold in its current condition "as seen". Sale is made under exclusion of any liability for material defects. The buyer confirms to have inspected the machine prior to purchase and accepted its condition. No warranty, return, or further guarantee is provided. Seller's liability is limited to intent and gross negligence only.

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Crjdpfxsbumr Ss Adasi Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: good (used), Gescha extraction system, very well maintained, suitable for spray mist and dust, equipped with a single-stage switch. Mounted on lockable castors for easy mobility. Can be shipped via freight carrier (price upon request). The Gescha extraction system is a premium solution for your woodworking shop, carpentry, and spray painting applications. It provides efficient and safe extraction of wood dust and paint particles, improving air quality and protecting health. This system is ideal for small to medium-sized workshops, offering reliable performance and user-friendly operation. Its robust construction and straightforward installation allow for quick and hassle-free commissioning. Crodpfjxt U Rnjx Adaoi

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Crodpfx Adsvvizksaoi Storage location: Garbsen

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Airflow capacity approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Csdpfxjxl U Dlj Adajri Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Prefilter F5 2. Centrifugal separator 3. Post filter F5 (optional: HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9); optional HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (similar to WS2 model) Accessories & Features • Compact design for mounting directly on or beside CNC machines • Stand for extraction • Three-stage filtration for efficient oil and emulsion mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low-noise operation, and long-life filter elements Subject to alteration and error in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg Crodewv Nbcopfx Adasi

Condition: ready for operation (used), functionality: fully functional, Paint mist extraction with supply air system Cjdpfx Adjxl Um Teasri Manufacturer: Späne Paint mist extraction wall Spänex TAW 220 Air volume 6,000 m³/h, motor power 1.35 kW Exhaust pipe diameter 400 mm Baffle wall area 2000 mm x 1900 mm Extraction wall depth 800 mm Supply air unit with heating coil Spänex WK 61 for paint booth ventilation cassette-type design Air volume 6,000 m³/h, motor power 2.5 kW Heating medium: hot water 90/70°C Thermal output 77 kW Supply air duct components Filter outlet ceiling 1900 mm x 1900 mm x 300 mm Connection bends, duct elbows Control and regulation cabinet For supply air unit and paint mist extraction Already dismantled and ready for loading

Condition: used, Year of construction: 2015, operating hours: 5,231 h, functionality: fully functional, machine/vehicle number: 2015019, type of input current: three-phase, overall weight: 1,590 kg, input voltage: 400 V, total width: 1,756 mm, total length: 2,066 mm, total height: 3,643 mm, power: 15 kW (20.39 HP), input frequency: 50 Hz, Equipment: oil mist separator, type plate available, Oil mist extraction from the workshop, plug & play filter tower for extraction during emissions of coolant lubricants in production halls. Filter ventilation tower IVAT Air FTower 20,000M. Ideal for aerosols, oil mist, emulsion mist and vapors. Crodjxqf Hzjpfx Adaei Industrial hall filtration ventilation – suitable for various technical manufacturing processes in production facilities, primarily in metalworking. In many cases, the extraction systems installed directly on machines for coolant recovery are either insufficiently efficient or not installed at all. Setup operations on machine tools, frequent opening of machine enclosures, or missing covers on machining heads can result in oil mist escaping from the machine area and reaching work zones, where employees are exposed to harmful mists and vapors. Installing a ventilation tower significantly improves air quality at workstations and should be considered the ideal complement to industrial hall filtration ventilation – especially where complete separation of oil mist via coolant recovery systems is either not possible or difficult to implement. Includes automatic room air and temperature monitoring. An innovative PLC control system compares sensor data and detects any exceedance of thresholds at workstations or increased temperature directly at the hall ceiling, then fully automatically regulates temperature and air quality. Filters are barely used, see images. Price ex works, pick-up only.

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm Cjdpfx Ajumvtqedaori - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: excellent (used), Mobile paint mist extraction unit With side air baffles Built-in fan Csdpfx Adstk H Nyjaeri

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% Crsdpswdvthofx Adaei - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Condition: ready for operation (used), Year of construction: 1998, Spray booth / Rippert paint system, fully functional, removed from school operation (WIFI) Crjdpfx Aoxp I Ufjdaei Manufacturer: Rippert Type: Spray booth / paint system with extraction, control unit, supply air, and heating register Airflow capacity: approx. 10,800 m³/h Design: Extraction/filter system with ductwork and control cabinet control Condition: well-maintained, functional, available dismantled Plans and documentation available Equipment: - High-quality paint application and extraction system from the German premium manufacturer Rippert - Extraction and filter unit with pressure gauge and maintenance hatches - Piping and valve system (galvanized steel, DN connections) - Control cabinet with controls, emergency stop, operation indicators, and operating elements - Heating register - Compact, robust construction for continuous industrial use - Explosion-proof lights (EX) - Explosion-proof fire markers (EX) Application areas: - Wood and furniture industry - Metalworking (e.g. machine or vehicle parts) - Coating of plastic parts - General industrial and craft applications Technical data (according to nameplate/manufacturer specifications): Airflow capacity: 10,800 m³/h Manufacturer: Rippert

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,550 h, functionality: fully functional, Paint mist extraction wall with dry separator Complete supply air system with exhaust, control cabinet, lighting, and piping inside and outside Credpfxsxltm Se Adaji Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Year of manufacture 2011 From carpenter workshop closure / retirement, IN GOOD CONDITION ex workshop

Condition: used, SCHUKO Farb-Max paint mist extraction system - used - Throttle valve Cedpfx Ajwmmt Dsdaeri ----- Technical specifications ----- Air flow: 3,600 m³/h, Filter area: 2 m², Connection diameter: 300 mm, Motor power: 1.5 kW, Dimensions (LxWxH): 2,650 x 800 x 1,355 mm, Weight: 160 kg

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Crodpfx Aohc Sypjdaji Price/ piece

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Crjdpfxjwnr Ipe Adaoi

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Crodev I Tfdspfx Adaji Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm Crjdpfx Adjiau Tzjaoi deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Cedpfxowydgzo Adajri

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h Codpfxswd Nlks Adajri

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor Crsdpshw Ev Sofx Adasi - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels Codpfxju Aafdj Adajri - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: Crsdpfswqdycox Adaoi - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 9501441040100301, Offer 24469 Welding mist filter system with spark pre-separator + extraction arms Technical data - Vertical version for filtering welding fumes + grinding dusts, - Welding fume class "W 3" Crsdpfxjuwl Duo Adaei - Suitable for filtering welding fumes from steels with - chromium + nickel content of over 30% - Exhaust air can be discharged into the work area, e.g. for heating or outside - can be - TEKA control unit - Air volume flow up to approx. 4000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning system with separation efficiency > 99 % - Separate control cabinet - Connection 400 V / 4 kW - Space requirement Filtercube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg - Separate spark pre-separator make TEKA type FVS 4000 - 6000 - Space requirement spark separator W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Pipework