Used Mist Extraction for sale (4,288)

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Itedpovvizkefx Am Eef

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Iodpot Rv Txofx Am Ejtf Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Itsdpfx Aebumr Sjm Esf Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Itjdpfxswnr Ips Am Eef

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Iodowydgzepfx Am Eotf

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit - extraction unit dimensions: 3000 x 1000 mm Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. Iodpfx Amsx T Amyj Estf FCA D-78087 Mönchweiler – loaded onto truck

Condition: ready for operation (used), OIL MIST EXTRACTION, CENTRIFUGAL OIL MIST EXTRACTION, EONAG 3000 Used machine Manufacturer: Innovations-Center Type: Eonag 3000 Year of manufacture: 2012 Enclosure dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz Isdju Nu Rhepfx Am Eetf - 4000 m³/h - 84 dBA - 2800 l/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm Itsdpfxoiau Tzs Am Eef length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: Iodpfjwqdycox Am Eetf - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm Itedpfxehw Ev Ss Am Eef - air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm Iodpfsu Aafdox Am Eetf - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, volume flow: 6,000 m³/h, filter area: 4 m², total length: 2,000 mm, total height: 2,000 mm, overall weight: 300 kg, power: 2 kW (2.72 HP), pipe diameter (max.): 400 mm, Paint mist extraction wall, spray wall, exhibition device, paint area approx. 2,000 x 2,000 mm, incl. side baffles, motor in ATEX version Itjdpowrnypjfx Am Esf - immediately available -

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW Iodpfx Amsxdpl Ue Ejtf - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth Isdpfewv T R Uox Am Eotf - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Itodpfx Amowv Nbcj Eef Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Price/ piece Isdpfx Aohc Sypsm Ejtf

Condition: excellent (used), Servatechnik extraction Iedpfx Aex Nbnnsm Eetf

Condition: used, Paint mist extraction system, approx. width 1200 mm, height 2200 mm, extraction motor mounted on top Isdpfx Amoyl Ippe Eetf

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Isdpfx Ameu T Hrpj Ejtf Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Iodpfx Amey Dpfwo Estf Condition: very good

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Itodpsyuf S Hefx Am Eef Edge extraction with fan Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: excellent (used), Dust and mist extractor Delta Neu model Poluclean Iodpfxjyw Hrbo Am Eetf

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Itsdpsyvkwfjfx Am Esf Price: 3500.- Location: 1230 VIENNA

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Itjdpfoxxh Taox Am Eof Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW Itjdpfx Amsyn Rkuo Ejf * 4000 m³/h * 84 dBA * 2800 L/min