Used Mk2 for sale (194)

Condition: used, Binder   Temperature Testing Cabinet MK 240 Type: MK240-400V   The Binder temperature testing cabinet from the MK series is designed for heat and cold tests in the range of -40 °C to +180 °C. The MK is particularly an efficient alternative to individual custom solutions, especially for cyclic temperature tests.   For sale is a Binder temperature testing cabinet MK 240 for use in industry, research, development and quality assurance.   Technical data:   Temperature range: -40 °C to +180 °C Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Average heating rate: approx. 5.0 K/min (according to IEC 60068-3-5) Cooling time: from +180 °C to -40 °C approx. 110 minutes Average cooling rate: approx. 4.5 K/min   Internal volume: approx. 228 liters Maximum load per shelf: approx. 30 kg Maximum total load: approx. 70 kg   Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D)   External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D)   Feedthroughs: 2 x Ø 70 mm Number of doors: 1 Shelves: 2 (standard) / max. 6   Electrical data:   Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~   Weight: approx. 320 kg   Condition   Used Lsdpfx Ajy Nic Hjb Nsah Optical condition as shown in the pictures Normal storage and usage marks are present   Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates and manufacturer information.   Shipping is possible. Subject to changes, errors and prior sale.   We will gladly answer any further questions by telephone.

Condition: used, Binder Temperature Testing Chamber MK 240 Type: MK240-400V The Binder temperature chamber in the MK series is designed for heat and cold tests in the range of -40 °C to +180 °C. The MK is particularly an efficient alternative to custom solutions, especially for cyclical temperature tests. For sale is a Binder temperature testing chamber MK 240 for use in industry, research, development, and quality assurance. Technical data: Temperature range: -40 °C to +180 °C Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Average heating rate: approx. 5.0 K/min (according to IEC 60068-3-5) Cooling time: from +180 °C to -40 °C approx. 110 minutes Average cooling rate: approx. 4.5 K/min Internal volume: approx. 228 liters Laedpfoy Nicmox Ab Noh Maximum load per shelf: approx. 30 kg Maximum total load: approx. 70 kg Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Feedthroughs: 2 x Ø 70 mm Number of doors: 1 Shelves: 2 (standard) / max. 6 Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg Scope of supply Scope of supply as shown in the images Grid pattern tester with accessories in a transport case Condition Used Optical condition as shown in the images Normal storage and signs of use Important note: All information has been compiled to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: new, Motor ----- 750W - 230V - 1 Phase Drilling capacity ----- 20 mm Quill stroke ----- 82 mm Spindle taper ----- MK2 Variable speed Spindle speed 400 ~ 2000 rpm Work table ----- 305 x 305 mm Base ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 1590 mm Weight ----- 74 kg Packaging ----- 1150 x 500 x 300 mm INCLUDED * Digital depth stop * Digital spindle display * CE guard * Laser device * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Drift key Lajdpfega T Hcox Ab Neh

Condition: as good as new (ex-display), SHOWROOM MACHINE We are selling our as-new Drechselmeister MIDI 1 wood lathe with a distance between centers of 400 mm. The showroom machine is in original condition, so you receive the full warranty. Technical Specifications: Laodpfxjtpn Nlj Ab Noh - Center height approx. 178 mm / Maximum turning diameter 355 mm - Distance between centers approx. 400 mm (can be extended with optional bed extensions) - 3 belt speeds / Infinitely variable speed regulation: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-vibration profile* - Tailstock with MK2 quill (50 mm travel with scale!) - Motor 0.7 kW / 1 HP (230 V) with frequency inverter - Weight approx. 43 kg The machine is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Shipping by freight forwarder: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address details in the contact form so we can process your enquiry professionally! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning tools, wood turning, turning machine Reference: R-A0117

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA Ledpfjh N Sc Eex Ab Noah - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg Ledpfx Abophupue Noah

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg Lodpevunrfofx Ab Nsah

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Laedpfjx Dkr Nox Ab Nsh Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V Lodpfx Aboud H H Ue Neah weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: new, Year of construction: 1993, Storage location: 100575648 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Tower crane, Peiner SMK201, jib length 22m, hook height 17m, max. load 2000kg, radio remote control, ready for operation, in good condition. Ljdpfx Abozkz Emo Noah

Condition: new, Year of construction: 1993, Warehouse number: 100576143 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Peiner crane SMK201, reach 22m, hook height 17m, max. load 2000kg, radio remote control, ready for use, in good condition, TÜV valid until November 2023. Lodpszk Aitsfx Ab Njah

Condition: new, Year of construction: 2025, functionality: fully functional, table size: 800 x 240mm table longitudinal movement range: 400 mm table transverse movement range: 230 mm max. drilling diameter in normal steel D30 mm max. drilling diameter at horizontal head D25 mm distance between table plane and spindle face 60 – 360 mm speed range: 80 – 2200 rpm max. vertical spindle speed 100 – 2000 rpm max. horizontal spindle speed 60 – 1350 rpm spindle taper ISO40 spindle stroke 120 mm power 2.2 / 1.5 kW Lasdpfsyr Ib Eex Ab Neh drilling capacity dia. 50 mm thread drilling capacity max. M16 dimensions 1300 x 1100 x 2200 mm (w x d x h) weight approx. 900 kg Accessories - 3-way SINO DRO system - 90 degree rotatable head bracket - 2 reducers (ISO40/MK3, ISO40/MK2) - drill head with shank, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 15-piece chuck set diameter 2 – 26 mm - work lamp - cooling water system

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 41800 € 798.38 € 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm Lajdpfjwirdgex Ab Nsh 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: new, bore capacity in steel (diameter) 16 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK2 spindle turning speed range 50 - 2250 U/min 320 mm 145 mm Lodpfxeupxmrj Ab Noah table surface area 500 x 140 mm connected load frequency 230 V total power requirement 0,5 kW weight of the machine ca. 90 Kg dimensions of the machine ca. 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm Ljdpfjd Tm Hnjx Ab Neah -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Condition: new, Year of construction: 2026, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS Lodpfx Ajud H Huob Neah 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: used, Tapping chuck, tapping chuck, tapping chuck, milling tool, tapping attachment -Tapping chuck: Mount MK2 Lodom Dyhxjpfx Ab Nsah -Type: GH 20 MK2 -Bore: Ø 16 mm -Dimension: Ø 67 x 186 mm -Weight: 1.9 kg

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Lodpfxeud Izto Ab Noah Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: new, functionality: fully functional, spindle bore: 26 mm, turning diameter: 250 mm, turning diameter over top slide: 145 mm, center height: 125 mm, turning length: 750 mm, total length: 1,520 mm, total width: 670 mm, total height: 1,650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, bed width: 135 mm, type of input current: DC, overall weight: 195 kg, three-jaw chuck diameter: 125 mm, spindle mount: MK 4, Turning and milling combination WMP250BVx750 with brushless motors including a luxury base cabinet LATHE Center distance ----- 750 mm Center height ----- 125 mm Diameter over bed ----- 250 mm Headstock bore ----- 26 mm Headstock spindle mount ----- MK4 Lathe speed ----- 50-2000 continuously variable rpm Motor power ----- 1.1 kW Weight ----- 135 KG MILLING UNIT Overhang of milling attachment ----- 170 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling machine spindle mount ----- MK2 Milling head rotatable ----- +/- 90 degrees Lsdoga T Emjpfx Ab Nsah Travel of milling spindle quill ----- 50 mm Motor power ----- 600W Weight ----- 75 KG

Condition: used, Burnishing tool, roller burnishing machine, rolling mandrel, smooth rolling tool, internal rolling tool -Manufacturer: Sartorius, roller burnishing tool holder MK2 -Type: Diameter 55 mm -Dimensions: Ø55 x 270 mm -Weight: 1.7 kg Lasdpfeua Nlljx Ab Nsh

Condition: used, functionality: fully functional, machine/vehicle number: 9FBMK25T-11431, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 2,505 mm, fork carriage width: 1,070 mm, fork length: 1,200 mm, empty load weight: 4,736 kg, total length: 2,280 mm, drive type: Elektro, construction width: 1,195 mm, Electric 4-Wheel Forklift Lajdpfexvwiljx Ab Nsh VIN: 9FBMK25T-11431 Load Center: 500 Fork Width: 100 mm Fork Thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: As New Technical Condition: Very Good Front Tire Type: Super Elastic Front Tire Size: 23x9-10 Front Tire Condition: 80 - 100% Rear Tire Type: Super Elastic Rear Tire Size: 18x7-8 Rear Tire Condition: 80 - 100% Battery Voltage: 80V Battery Ah: 620Ah Battery Manufacturer: Exide Battery Type: PzS Battery Year of Manufacture: 2023 Battery Condition: 80 - 100% Windshield, PVC roof, without load protection grid, blue warning light, flat rearview mirror, mini lever, multi-display

Condition: new, Year of construction: 2026, CORMAK WS20B Bench Drill Press – Precision Metal Drilling Machine with Automatic Spindle Feed The CORMAK WS20B bench drill press is an advanced column drilling machine for metalworking, equipped with automatic spindle feed, enabling precise drilling and tapping in structural steel and other metals. Thanks to its robust construction, high power and accurate feed control, the WS20B provides high efficiency and reliability in both industrial and workshop applications. Main advantages of the machine Automatic spindle feed – precise feed adjustment up to 80 mm/min allows smooth and controlled drilling operations. Thread tapping function with automatic rotation direction switching – ensures safe and effective operation with taps up to M16. High rigidity construction – an 85 mm diameter column and seasoned castings reduce vibrations and improve drilling accuracy. 135 mm spindle stroke – allows deep drilling without the need to reposition the workpiece. Belt drive system – 5 speed levels ranging from 280–1875 rpm allow optimal adjustment of parameters to the processed material. CE safety systems – spindle and belt transmission guards with limit switches increase operator safety. Construction and technology Laodpfxjrif T Dj Ab Neh The CORMAK WS20B bench drill press with automatic feed has been designed for long-term and reliable operation. The spindle and transmission components are made of hardened and thermally treated steel. The column, base and worktable are manufactured from precisely machined, seasoned cast iron components. The MK2 Morse taper enables quick tool replacement and compatibility with a wide range of accessories. Precision and work efficiency The combination of automatic spindle feed and a powerful 1.1 kW motor enables smooth and repeatable drilling, even in difficult-to-machine materials. The rigid construction and the ability to rotate the worktable 360° improve operator comfort and provide greater flexibility when positioning workpieces. Applications The CORMAK WS20B drill press with automatic feed is used in: industrial plants, mechanical workshops, maintenance departments, technical schools and training centres. It is designed for drilling, reaming and tapping operations in metals, aluminium and engineering plastics. Standard equipment Drill chuck with key Morse taper drift key U-type spindle guard with safety limit switch Belt drive guard with safety limit switch Technical specifications Parameter Value Maximum drilling diameter (steel) 20 mm Maximum tapping diameter (steel) M16 Spindle stroke 135 mm Spindle taper MK2 Spindle speed range 280–1875 rpm Number of speeds 5 Feed speed range 0–80 mm/min Column diameter 85 mm Column wall thickness 12.7 mm Spindle-to-column distance 260 mm Spindle-to-table distance 366 mm Spindle-to-base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: DC, spindle mount: MK 2, total width: 500 mm, total length: 300 mm, total height: 1,050 mm, table width: 290 mm, table length: 290 mm, overall weight: 47 kg, drilling capacity: 16 mm, column diameter: 72 mm, drill chuck size: 16 mm, spindle speed (max.): 2,840 rpm, spindle speed (min.): 220 rpm, stroke length: 85 mm, Motor ----- 550W - 230V - 1 Phase Drilling capacity ----- 16 mm Spindle stroke ----- 85 mm Spindle taper ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Work table ----- 290 x 290 mm Lsdok Iuzispfx Ab Noah Base ----- 420 x 250 mm Column diameter ----- 72 mm Total height ----- 980 mm Weight ----- 47 kg Packaging dimensions ----- 820 x 500 x 290 mm INCLUDED * Digital depth stop * CE protective cover * Laser device * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Drift key

Condition: good (used), Year of construction: 2004, functionality: fully functional, SAOM P12 Router Manufactured by SAOM s.r.l., Italy Year 2004 Router for milling and copying work on wood, composite materials, plastics, and various materials CE standard TECHNICAL DATA Table size: 1000 x 800 mm Distance between spindle and column: 800 mm Vertical spindle stroke: 100 mm Vertical table stroke: 200 mm with table extension Tool holder: MK2 Spindle speed: continuously variable 9000/18,000 RPM Laedpfx Aovuzidob Noh Motor power: 2.5 kW (3.2 HP) Standard power supply: 400 V, 50 Hz Weight: 750 kg

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition Lsdpfx Absxf Uwxj Nsah