Used Mkr 150 for sale (18,380)

Condition: excellent (used), Espec Type: PSL-2KPH Thermo TEC Espec Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +150°C Humidity range: 20 to 98% rH Temperature/Humidity Fluctuations: ± 0.3°C / ± 2.5% rH Temperature/Humidity Stability: ± 0.5°C / ± 3% rH Heat-up time: from -70°C to +150°C in 50 min Cool-down time: from +20°C to -70°C in 80 min Bdodpfxew D Dgvo Aczok Test chamber dimensions: width 600 mm x height 850 mm x depth 600 mm External dimensions: width 1010 mm x height 1690 mm x depth 1173 mm Test chamber volume: 306 liters Refrigerants: R-404A, R-508A Stainless steel construction Connection: AC 400V 3~ 50/60 Hz Max. 18 A Rated power: 1.5 kW Net weight approx. 400 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: repair required (used), piston compressor, compressor -Compressor: without function, sold as spare part -Handover in the current condition as viewed -Volume flow: 340 l/min -Max. pressure: 10 bar Bjdpfjb A Sbwsx Aczsdk -Engine power: 4 kW -Tank capacity: 150 l -Dimensions: 1400/500/H900 mm -Weight: 180 kg

Condition: good (used), Year of construction: 1998, Robot Kuka KR125/150/200 Manufacture Date 1996/1998 Reach 2400 mm Weight 975 kg/1025 kg Payload 125 kg, 150 kg, 200 kg Controller Type VKRC1 (VW/Audi Version) Weight 136 kg Bdjdpfxjbywf Ds Aczek Software Version 4.1.7 SP08 Teachpendant Kuka VKCP1 Cable length 7m Larger number of pieces available Large volume sales preferred !

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades Bjdpst Ht Hhjfx Aczodk - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 Bdedpfxogi E Eve Aczsk lifting capacity 1500 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,400 kg, loading space volume: 2.78 m³, inner dimension height: 1,500 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Maximum temperature: 190 °C Interior dimensions Internal usable volume: 2.78 m³ Internal dimensions (H x W x D): 1,500 x 1,600 x 1,100 mm Recirculation fan speed adjustable range min.: 50% Recirculation fan speed adjustable range max.: 120% Minimum exhaust air volume flow (exhaust mode): 360 m³/h Reduced exhaust air volume flow (recirculation mode): 90 m³/h Air change rate: 5 times per 300 sec. Bdedpfx Aoxurx Seczek Total steam chamber volume: 4.5 m³ MACHINE DETAILS Weight: approx. 1,400 kg Filter class: H13 EQUIPMENT S!MPATI software Vacuum connection Cleanroom certification

Condition: excellent (used), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a minor dent at the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates without any technical issues. The dent is purely cosmetic and does not affect function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.h. Temperature/humidity fluctuation: ± 0.3°C / ± 2.5% r.h. Temperature/humidity stability: ± 0.5°C / ± 3% r.h. Heating/cooling rates & times: Heating rate: 5.0°C/min Cooling rate: 3.0°C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Feed-through with silicone stopper, 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3φ, 50Hz, 31 A Net weight approx. 720 kg For your safety as a buyer, please note the following: The following points are carried out in advance on all chambers we offer: Bdodswz Er Ujpfx Aczjk 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerants 3. After successful inspection, the chambers undergo a trial run monitored by calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-Entry Arburg Multilift Robot / 2K Machine Year of manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 cm³ Bjdpfx Ajxz Acnoczsdk Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-entry Arburg Multilift robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system for hot runners Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace Bjdpfxocmr D He Aczedk max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Bjdpfx Acsxugxtszedk Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor right 150°-780-600-IR600 RA2002 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) Motor: will be changed conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Bdjdpfx Acjk Abr Sozsk Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 956.71.80.288, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: HEIDENHAIN TNC 150, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Placing a bid constitutes a binding commitment to collect the item on time between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Tool holder: SK 40 Table dimensions: 1,000 x 500 mm, with 7 T-slots MACHINE DETAILS Control: HEIDENHAIN TNC 150 Bdodexqg Itjpfx Aczjk Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connection: 10.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,200 mm Weight: 2,000 kg EQUIPMENT Documentation Collets Gauge block set

Condition: excellent (used), Weiss Model: WKL 34/40 Weiss Climate Chamber, Air-Cooled Bdedpfxexvpp Rs Aczsk -40°C to 150°C Chamber volume: 34 litres Feedthroughs included as standard: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Specifications for temperature testing: Temperature range: -40 to +150 °C Temperature deviations at steady state (according to IEC 60068-3-5): Temporal fluctuation in centre of usable space: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 K Rate of temperature change (according to IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Max. heat compensation: 800 W Specifications for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Temperature and humidity fluctuations (at steady state, according to IEC 60068-3-5): Temperature fluctuation (temporal, centre of usable space): ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 K Humidity fluctuation (temporal, centre of usable space): ± 3 to ± 5 % RH Operating data: Test chamber lighting: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Protection (on site): 16A slow-blow Heat output (air-cooled test chambers): Max. heat emission to environment: 800 W Refrigerant: R-404A Weight: 110 kg Important notice: “The table shown in the photos is not included in the sale.” For your safety as a buyer, please note the following: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) If you have any further questions, we will gladly answer them by phone.

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Bodpfx Ajxz Aagjczodk Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Bsdsxvb S Rspfx Aczodk Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: new, pressure: 150stroke: 300table area: 1570x435daylight: 805 Bdsdpfxsd Ab Nds Aczok

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor left 150°-780-600-IR600 RA2017 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: will be changed Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Bedpfx Aok Abubeczsdk Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2006, condition: used, beside the press granulator Hellweg MDS 120/150 1,5 KW Year: 2006 Power: 1,5 kW Application: Feed opening: 150x150 mm No. rotor knives: 3 No. stator knives: 2 Rotor-Ø: 150 mm Rotor-width: 120 mm Price: € 2.750,00 contact: Mr. Rainer Eckerle Bdsdjixt Hlopfx Aczok

Condition: used, Year of construction: 2006, operating hours: 6,100 h, Equipment: all wheel drive, Ref. No.: B-14 * Wheeled Excavator * Atlas 1505 M / 150W * Year of manufacture: 2006 * Approx. 6,100 operating hours * Blade support * Adjustable boom * Full hydraulic system * Tires in good condition * Buckets available at additional cost * Weight: 18,000 kg * Central lubrication point Trade-in possible Financing from 3.99% Errors and prior sale reserved! The information in this advertisement is non-binding and does not constitute guaranteed properties. The seller accepts no liability for typing or data transmission errors. Listed features require separate verification. All details in the advertisements are non-binding! Delivery throughout Germany available upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Bdodpfx Acsxvf Trszek Friday from 9:00 am to 2:00 pm and by appointment!

Condition: excellent (used), Model cross-cutting system Brodbaek TYPE BCO 5/150 Bodpfexz R Ulex Aczsdk Already dismantled Sale upon customer request

Condition: used, Double Bench Grinder REMA DS 04/150 Rotation: 2900 RPM Bedpfx Acsxr D Aqozedk Grinding wheel: Ø 150 x 25 mm Motor power: 0,3 kW Voltage: 380 V Width: 450 mm Depth: 300 mm Total height: 1100 mm Weight: env. 50 KG

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Solideal, 2 pieces of tires with tube and rim -Tire size: 23-5(150/100-13) -Pressure:bar -Bolt circle: Ø 162 x 18 mm -Recess: Ø 110 mm Bdjdpfx Aeur Alkjczsk -Price/Delivery: complete -Weight: 27 kg/piece

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Bodpsk Aa Ryefx Aczsdk Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine Bdedpfjgrzh Eox Aczjk mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires Bodpfjur Alqsx Aczjdk -Handover: in current condition as viewed -Tire wear: see photos -Manufacturer: Solideal, 2 pieces of tires with tube and rim -Tire size: 23-5(150/100-13) -Pressure:bar -Bolt circle: Ø 162 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 27 kg/piece