Used Mkr 150 for sale (9,772)

Condition: used, Two Weinig Type 531 150 01 498 planer heads, including a batch of untested blades. Ibsdpfx Agozryhcsgja Technical data: - Blade system: Centrolock - Blade: Z4 - Flight circle (ø): 150 mm - Bore: 50 mm - Length: 310 mm - Material: Steel - Marking: MEC

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm Ibsdpfjwrh H Nsx Aggoa tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design Ibjdpfxsgrzh Ej Aggja 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 1998, condition: used, Technical details: pipe system - processing diameter: - mm pipe system - inlet: - mm Ibjdpfx Agsw Awwfjgoa volume flow ventilator - shred: - m³/h connection electric: 400 V Air volume: 2700 m³/h filter surface area: 52,5 m² volume: 18,7 L max. temperature: 50 Grad operating pressure: -/+ 0,1 bar weight of the machine approx.: 1250 kg Pressure max.: 5 bar dimensions L x W x H: 2,3 x 2,35 x 2,8 m Extraction of fibers - Reduction of spillage in transport containers, eg. Big Bags. / YOM approx. 2010 delivery scope: Suction fan Manufacturer Dantherm Filtartion, type T 0,56-224 RD0 D1, air supply quantity 2600 Nm³ / h, suction nozzle Ø 150mm to Ø 100mm, blow-out nozzle Ø 130mm to Ø 100mm Chip separator Two doors with attached air filter, door opening W x H: 1000 x 1960mm, interior space W x D x H: 1200 x 1160 x 1950mm, with filter attachment 1100 x x1100 x 350mm, filter surface 1200 x 1200mm, 2pcs filter (filter mat) 1200 x 600 x 50mm, insertion nozzle dia. Ø 100mm, with clamping bag attachment Optional accessories: -div. clamping bag -div. connecting tubes Ø 100 x 1000mm -div. connecting tubes Ø 100 x 300mm -div. connecting tube Ø 100 x 320mm -div. angle connections Ø 100mm -div. bayonet catches for pipe connections i.D. *

Condition: new, Year of construction: 2026, total length: 6,100 mm, Articulated telescopic work platform Manitou 150 AETJC Drive Electric Year built 2026 Work height (mm) 15,000 Iodpfjzfq Dbox Aggeba

Condition: used, Year of construction: 2007, functionality: fully functional, NAKAMURA Model WT-150 MMY, used, year 2007 CNC turning machine Fanuc 18 iTB control Swinging diameter above the guide: 190 mm Max. turning diameter/turning length: 190 mm / 400 mm Bar capacity: 51 mm Main spindle 15/11 kW, max. speed 5,000 rpm Counter spindle 11/7.5 kW, max. speed 5,000 rpm Spindle nose: A2-5 Draw tube diameter: 52 mm (L/R) Spindle bore: 63 mm (L/R) C-axis incremental input: 0.001 degrees 2 x 12-station turrets, all stations powered 24-station indexing Tool holder dimensions, outer/inner: 20mm/25mm/32mm Speed of rotating tools: 60 – 6,000 min-1 Y-axis +/- 35 mm on the upper turret Travel X1/X2-axis: 167.5 mm Travel Z1/Z2-axis: 465 mm Rapid traverse X1/X2-axis: 16 m/min Rapid traverse Z1/Z2-axis: 40 m/min Chip conveyor type A, left Finished part discharge type G, right Coolant system Chip conveyor CE marking Equipment: Spindles, clamping devices & bar capacity Main spindle option: bar capacity 65 mm (left) at max. 4,500 rpm Draw tube adapter M74x1.5 to A-6 and M58x1.5 to A-5 (with coolant hole) Chuck air blow-out, outer left Coolant and air blow-out through the right spindle Axes, control & software options Y-axis (+/- 35 mm) on the upper turret Helical interpolation (thread milling) Polygon turning function (without holder) Intelligent handwheel 5 pairs of free M-functions (M-codes) Software: NC-Praktiker 2000 for Windows (DIN-ISO programming system) Automation & part discharge Finished part unloader: Type G WT 150 (L=150" mm", ∅65" mm") Profile timing belt for part gripper G (WT 150, ∅65" mm") Iodpfx Agezqdpnsgsba Collection tray A ∅65 mm for material scrap discharge Coolant, filtration technology & chip disposal Chip conveyor: Hinged belt conveyor Knoll (Type 200 S-1) incl. interface Cyclone filter system: HA 180-4 incl. 2 coolant pumps Preparation for Brinkmann pumps Submersible pump TAL 401/140 51Y with TAL401 adapter plate

Condition: good (used), Year of construction: 2012, operating hours: 185 h, fuel type: electric, Manitou 150 AETJ Compact Articulated Boom Lift / Work Platform 2012, 15.40m Working Height Video can be sent via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) You can make a viewing appointment and/or schedule a test drive without obligation. Please call in advance as we are not always present on site. Ibjdpfszqhk Ajx Aggea Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Ibodpfx Agowkih Ejgja

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Ibodpfxswqqwbe Aggoa

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Ibjdpfx Agsucw Tpjgja

Condition: ready for operation (used), Year of construction: 2015, A Neopost inserting machine is available. Inserting capacity: 4500 letters/h, inserting capacity with 2 sheets (collected): 3400 letters/h, envelope feeder capacity: 400, inserting liquid tank: 1, document feeder capacity: 500 sheets. Envelope thickness: 4mm, min. document dimensions X/Y: 76mm/140mm, max. document dimensions X/Y: 228mm/406mm, min. envelope dimensions X/Y: 89mm/152mm, max. envelope dimensions X/Y: 165mm/264mm. Fold types: Spiral fold/Z-fold/single fold/double fold/parallel fold/non-fold. Machine dimensions X/Y/Z: approx. 3600mm/550mm/600mm, weight: approx. 400kg. Including the underframe (piece of furniture - green). Documentation available. On-site inspection is possible. Expected to be available from mid-May 2025. Ibedpsv N I Aysfx Aggsa

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Ijdpfsum U S Eex Aggsba

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Ibodpfxeyxgr Rj Aggea

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Ibodpfx Ajw Hthzjggsa

Year of construction: 1993, condition: ready for operation (used), A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible. Ibedpfjzhw S Dsx Aggea

Condition: ready for operation (used), Year of construction: 2024, A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible. Iodpfsvr Efkex Aggjba

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1301, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 200 mm, table width: 100 mm, clearance between the columns: 400 mm, total length: 5,200 mm, total width: 1,730 mm, total height: 3,240 mm, overall weight: 10,500 kg, Equipment: CE marking, Adjustable sheet metal support arms, front side Parking station for sheet metal support arms, left side WILA crowning system Under power Max. bending length: 3100 mm Distance between uprights: 2550 mm Max. pressing force: 150 tons Distance to table mount: 590 mm Max. stroke: 200 mm Ijdpfx Aozl Ahrjggjba Table width: 100 mm Upright overhang: 400 mm Descent speed: 300 mm/min Working speed: 10 mm/min Return speed: 120 mm/min X-axis range: 0 - 1000 mm Number of controlled axes: 6 Crowning: Yes Power: 11 kW Length: 5200 mm Width: 1730 mm Height: 3240 mm Weight: 10500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1978, Used conventional press brake by Darley Type AP 150 3100 Capacity: 3100 x 150 tons Simple operation Isdpezk Hl Eefx Aggjba The front beam partially sinks into the ground Includes tooling

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Isdpfxey Tzqqe Aggoba Fork width: 160 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Ibjdpfxjyxrt Te Aggea

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 12/2024, emission class: euro6, color: white, number of seats: 2, Year of construction: 2024, Equipment: air conditioning, airbag, all-season tires, central locking, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Bluetooth - DAB + Receiver - Driver airbag - Electric windows - Front fog lamps - Multimedia preparation - Passenger airbag - Passenger seat - Power side-view mirror - Radio Bluetooth - Rear doors - Rear view camera - Remote central locking - Steering wheel audio controls - Two rear doors = More information = General information Number of doors: 3 Registration number: V-72-KBF Technical information Number of cylinders: 4 Engine capacity: 1.997 cc Transmission: 6 gears, Manual gearbox Max. front axle load: 1950 kg Max. rear axle load: 2000 kg Isdpfx Asywum Hjggeba Measures length/height: L2H2 Dimensions (LxW): 569 x 208 cm Weights Empty weight: 2.017 kg Carrying capacity: 1.483 kg GVW: 3.500 kg Max. towing weight: 6.000 kg Functional Extendable superstructure: Yes Maintenance APK (MOT): tested until 12/2027

Condition: used, mileage: 198,098 km, power: 110 kW (149.56 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 2,105 kg, maximum load weight: 1,395 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,400 mm, brakes: other, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, cabin, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, * Condition, see photos * Body/Superstructure: Box, high and long * Furniture transporter * Non-woven interior walls with cargo securing rails on the right and left * Loading dimensions: Length = 3,083mm x Width = 1,765mm x Height = 1,894mm * Rear tailgate doors, 270 degrees * Sliding door on the right * LED interior lighting * Air conditioning * 3 seats * Rearview camera * Automatic transmission * Cruise control * Load assistant * Radio navigation * Bluetooth phone * Hill descent control assistant * Multifunction steering wheel * Electric mirror adjustment * Heated exterior mirrors * Electric windows * ABS/ASR/ESP * Airbag * Central locking with remote control * Headlight range adjustment * Wheelbase 3682 mm * Permissible total weight 3500kg * Unladen weight 2,105 kg * Payload 1,395kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Ibsdpoxl Smdofx Aggea Subject to changes, prior sale and errors.

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment Iedpfx Aed Iapyeggoba • program • air table • side table right • side table left • light barrier • 2 knives

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Speed: max 9000 Ex./h Number of stitches Standard: 11 Stitching length: 19 mm Ibsdpfx Agjr Duu Aogsa Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Iodpfx Aedubvqsggeba Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery