Used Multiple Drilling Machine for sale (65,064)

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Cgodpfeywtxbjx An Nju Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: Cedpfx Anjy N D I Dj Njgu - Feed - Variable spindle speed - Coolant pump - Machine light

Condition: used, Year of construction: 2005, bore capacity in steel (diameter) 30 mm throat 275 mm bore stroke 100 mm taper MK 4 MK table-size 420 x 340 mm feeds nein mm/U turning speeds 80 - 2000 U/min total power requirement 0,9 / 1,45 KW weight of the machine ca. 0,22 t Cgedpfxoy N D Iqj An Neu dimensions 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 4 MK Cjdpfx Ajy N D Iksn Nsgu table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm Cgodpfoy N D Hysx An Nsu throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive

Year of construction: 1991, condition: ready for operation (used), A single-sided glass drilling system is offered. Table surface X/Y: approx. 800mm/600mm, drilling diameter: approx. 3mm-100mm, table design: grating support for water drainage, control: manual drilling feed. Equipped with sturdy steel base frame, water collection tray. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 1000mm/1100mm/1650mm. Inspection possible by arrangement. Cgodpfxoy Tn Iij An Nou

Year of construction: 2018, condition: ready for operation (used), A vertical glass drilling system is offered. Working range X/Y: unlimited/1300mm, drilling diameter: 3mm-100mm, glass thickness: 3mm-25mm, control: digital position display with manual drilling control. Equipped with rollers on both sides, water collection tray, pneumatic workpiece clamping, drill set. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 5000mm/2500mm/1200mm. Inspection possible by arrangement. Csdpfx Ajy Tn Hxjn Nogu

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Csdpfx Ajy Tn Ntjn Negu

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm Cjdpoy Tw Tzofx An Negu - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations) Cgjdpfxoy Tw Sws An Nsu

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Cgodpfx Ajy Ih Tzsn Nou Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Csdpfx Anow Naabe Negu Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm Cgjdpfxovmtlhj An Neu - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Cgodpfxoy Akdxs An Nou Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: Cgjdpfsy Tt Rpsx An Nsu N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: good (used), vertical or horizontal drilling Cgodjrfufdjpfx An Nou 18 drills divided into 2 units of 6 each spacing 32mm 2 pneumatic clamps

Condition: excellent (used), Year of construction: 2011, Technical Data: Drilling capacity: Ø 40 mm Thread cutting: M27 CNC control: CMA system Table dimensions: 9,000 x 520 mm Max. table load: 9,000 kg X-axis: 9,000 mm Y-axis: 650 mm Z-axis: 400 mm Spindle taper: BT40 Speed: 10 – 3,000 rpm 6 pneumatic clamps Spindle motor power: 4.4 kW Cgsdpfxsy Rxz Is An Neu Tool magazine positions: 10 positions CE marking Dimensions (W x D x H): approx. 11,700 x 2,450 x 2,100 mm Weight: approx. 7 t Accessories: Spindle coolant system The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 65 mm arm length 1600 mm workpiece height max. 1600 mm Cgedpfoy Tplvex An Nou surface area 1800x800 mm turning speeds 18-1800 U/min Feed -2,54 mm/U The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Drill grinding machine Cgjdpfx Asguadnjn Nsu Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Paintwork gray Areas of application: Grinding cone shell Sharpening relief grinding Scope of delivery: CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual Csdpoc I Tzvefx An Njgu

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device Cgedpfsd Hrhvox An Nou -Light machine -automatic tool ejector -Manual

Condition: new, Drill Grinding Machine Make: MOTOM Model: BSM 22 grinding range 8-22 mm (with options up to 25 mm) Codpfx Aneb Ecp Aj Njgu incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 8-22 mm increasing by 1,0 mm

Condition: new, Drill Grinding Machine Make: MOTOM Model: BSM 13 grinding range 2-13 mm Cgjdpfx As Sgi Rjn Nsu incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 2-13 mm increasing by 1,0

Condition: ready for operation (used), functionality: fully functional, Radial drill, Csepel RFM 51, used machine The disassembly of the machine is the responsibility of the buyer. Manufacturer: Csepel Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Drilling capacity in steel: 100 mm Cjdpfx Anowcqlcs Nsgu Drilling capacity in cast iron: 120 mm

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Codpfxsv Rpf Se An Nogu Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.