Used Nakamura Tw 10 for sale (41)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes Gsdpjy N Spcsfx Aayobt • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2006, condition: good (used), bar capacity 42 mm - three x 12 position turrets (3 x Y axis +/- 31 mm) - LNS Sprint S3 new in 2007 with rear magazine - weel tooled - Fanuc 31iTA Control Gjdpfxen Hvdke Aayebt

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; ± 115° ; 8000 rpm; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: -20+50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW Gbjdpfxezqwf As Aayst TOOL MAGAZINE: CHAIN-TYPE ; 40 POS HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,955 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 203 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 585 mm, spindle motor power: 15,000 W, total height: 1,852 mm, total width: 1,935 mm, overall weight: 6,000 kg, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: 0i-TF, product length (max.): 2,716 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details. Gbedpfx Aaoytqpnsyot Standard Equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Anti-collision protection system (mechanical “Airbag”) • Y-axis • 15″ LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system • Machine working area lighting • Coolant pump – 180 W • Initial coolant filling (Blaser coolant)Options included • Transformer • Luck-Beil II (NT Manual Guide – graphical interface for control) • Increased spindle bore to 71 mm (4500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Part ejector cylinder from sub-spindle (cylinder stroke 100 mm) • Signal tower for machine status (3 colors) • Operator shelf under control panel • Type A parts catcher (Ø71 mm / L150 mm / 3 kg) • Preparation for LNS bar feeder • Air blow through main and sub spindle • Manual tool probe (Renishaw, one arm for both spindles) • Spindle cooling system for main and sub spindle • Preparation for oil mist extraction system • There are no tools or tool holders included in the offer Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 290 mm, spindle nose: A2-8, number of spindles: 2, number of tool turrets: 3, Used Nakamura Tome Super NTY3 Jumbo machine (2 spindles, 3-turret lathe with Y-axis) Max. turning diameter: 325 mm Max. turning length: 250 mm Gbedpfx Aaozr D A Royet Distance between spindle centers: 260 - 1095 mm 11x Rotary tool holders 20x Boring tool holders 15x Driven angled tool holders 18x Driven axial tool holders 2 x Hainbuch collets 80 mm (main and counter spindle)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 600 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Counter-spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter-spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool stations upper turret: 12 Number of tool stations lower turret: 12 All tools driven Main spindle nose: A 2-6 Counter-spindle nose: A 2-5 Feed power X1/X2/Y axis: 1 kW Feed power Z1/Z2 axis: 2.1 kW Maximum loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle power: 18.5 kW / 15 kW Counter-spindle power: 11 kW / 7.5 kW Bar feeder Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm 8 pushers with pusher cone Intermediate sizes can also be loaded Unload magazine Max. bar length: 2 m Gbsdsynhihopfx Aayst EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last overhaul of bar feeder 09/2020 (channel replacement, replacement of various bearings, replacement of push rods and spindle liners, including maintenance)

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW Gbsdpfexiy Auox Aayot weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Gedpey Ipp Rofx Aayjbt Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: new, Year of construction: 2022, functionality: fully functional, The tool holder is completely new and still in its original packaging. There is a second one, which is used but shows no signs of wear. (see picture) Spindle MTSK-40 Gear ratio 1:1 Max rpm. 6000 Maximum torque [Nm] 50 External cooling Yes Internal cooling Yes Internal cooling P=30 BAR The holder can also be used for the following CMZ machines. CMZ - TA15M/Y/MS/MY/YS 15 PCS. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 PCS. CMZ - TA25M/Y/MS/MY/YS 15 PCS. CMZ - TA30M/Y/MS/MY/YS 15 PCS. Gbsdpfx Aasuzwutjyst CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Gsdjx I Rkpopfx Aayjbt Descriptionis and technical details are on photos.

Condition: excellent (used), Sub-spindle, Y-axis, C-axis Gbjdpfx Aaox A Eupoyet FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle motor power: 15 W, travel distance X-axis: 195 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 780 mm, Nakamura-Tome WT-300 CNC Lathe Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacities: Max swing diameter over upper/lower carriage: Ø 310 mm (upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter, main spindle/sub-spindle: Ø 270 mm Max turning length: 780 mm Spindle/bar capacity, main spindle/sub-spindle: Ø 65 mm Axis travels: X1 / X2 Axis: 195 mm Y Axis: 120 mm (±60 mm) Z1 / Z2 Axis: 780 mm B Axis: 850 mm C Axis: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Motor power (cont. / 30 min.): 11/15 kW (both spindles) Turret No. 1 & No. 2 (identical): Static/tooling stations: 24 stations (12 live tooling) Live tooling speed: 3,600 rpm Live tooling motor power: 3.7 / 5.5 kW Turning/boring tool size: 25×25 mm / Ø 32 mm Rapid traverse rates: X1 / X2 / Y Axis: 16,000 mm/min Z1 / Z2 Axis: 24,000 mm/min B Axis: 36,000 mm/min C Axis: 100 rpm B Axis: 27,000 mm/min Gjdpewx Hicsfx Aayjbt Included accessories: LNS bar feeder model MOVE (length capacity 2,300 mm) Chip conveyor Coolant collection tank with wash-down pump High-pressure pump with external coolant tank Various fixed and driven tool holders Tool presetting arm with dual-head RENISHAW interface Part unloading arm Manuals, electrical diagrams, and EC Declaration

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M301809, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 780 mm # Distance between spindle noses: min. 250mm/max. 1100mm # X1/X2 axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2 axis travel: 780 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/- 60 mm / Rapid traverse Y: 30 m/min # B-axis travel (Right Spindle): 850 mm / Rapid traverse B: 30 m/min Gbjdpfx Aajxxv A Aoyet Spindles # Spindle DIN 55026: Size A26 # Max speed: Left 4,500 rpm / Right 4,500 rpm # Power with 100% ED: Left – 15 kW / Right – 15 kW # Main spindle feature: Optional dual-stage clamping cycle # Bar capacity: Left spindle - 80 mm / Right spindle - 80 mm Tool Holder with Driven Tools # Tool interface: BMT55 # Number of positions: 12-station disc turret, all positions driven # Max speed: 3,600 rpm, Milling drive power: 5.5 kW Electrical Equipment # Operating voltage: 400V 3-phase, fuse 217A GL # Connected load: 71.9 kVA Dimensions # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm # Weight: 14,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and straightforward loading/unloading # CNC Control: Fanuc 18i-TB 2CPU, 2-channel control # Upgraded hydraulic unit: Hazabal S.L. GH1018/008 # Chip conveyor # Bar feeder interface # Automation interface available # Documentation: Electronic and hard copy available Machine status: Operational (in production)

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M232102, Technical characteristics: Work Area # Maximum turning diameter: 250 mm # Maximum machining diameter: 250 mm # Maximum workpiece length: 555 mm # X1/X2-axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2-axis travel: 600 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/-41 mm / Rapid traverse: 30 m/min # B-axis travel (Right Spindle Travel): 620 mm / Rapid traverse: 30 m/min Main Spindle # Spindle according to DIN 55026: Size 6 # Maximum speed: Left 4500 rpm / Right 5000 rpm # Continuous power (100% duty cycle): Left 15 kW / Right 7.5 kW # Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Tool Holder with Driven Tools # Tool interface: BMT55 # Number of positions: 12-station disc turret, all driven positions # Maximum speed: 6000 rpm, Milling motor power: 3.7 kW Electrical Equipment # Operating voltage: 200V, 3-phase, fuse 217A GL # Connected load: 75 KVA Dimensions # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm # Weight: 6,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and easy loading/unloading # CNC control: Fanuc 18i-T # Chip conveyor # Bar feeder interface Gsdexxvv Ajpfx Aayobt # Documentation: Electronic not available / Book available Machine Status: NOT WORKING # Fault not specified. Complete electrical rewiring performed in 2018 and linear guides renewed.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M234205, Technical Specifications: Work Area - Maximum turning diameter: 250 mm - Maximum machining diameter: 250 mm - Maximum workpiece length: 555 mm Gbodpfx Aaoxxvw Hoyjt - X1/X2-axis travel: 195 mm / X-axis rapid traverse: 30 m/min - Z1/Z2-axis travel: 600 mm / Z-axis rapid traverse: 30 m/min - Y-axis (Upper Turret) travel: ±41 mm / Y-axis rapid traverse: 30 m/min - B-axis travel (Right Spindle Travel): 620 mm / B-axis rapid traverse: 30 m/min Main Spindle - Spindle interface to DIN 55026: Size 6 - Max. speed: Left 4500 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Tool Carrier with Driven Tools - Tool interface: BMT55 - Number of stations: 12-station disc turret, all stations driven - Max. speed: 6000 rpm; Milling motor power: 3.7 kW Electrical Equipment - Operating voltage: 200V 3-phase, fuse 217A GL - Connected load: 75 kVA Dimensions - Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm - Weight: 6,000 kg Key Features and Capabilities: - Horizontal design: Optimized chip removal and easy loading/unloading - CNC control: Fanuc 18i-T - Chip conveyor - Bar feeder interface - Documentation: Electronic not available / Paper manual available Machine condition: NOT OPERATIONAL - B-axis not functional - Lower turret not functional

Condition: repair required (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: M301302, Technical characteristics: Work Area - Maximum turning diameter: 270 mm - Maximum machining diameter: 215 mm - Maximum workpiece length: 780 mm - Distance between spindle noses: min. 250 mm / max. 1100 mm - X1/X2 axis travel: 195 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axis travel: 780 mm / Rapid traverse in Z: 30 m/min - Y-Axis (Upper Turret) travel: ±60 mm / Rapid traverse in Y: 30 m/min - B-axis travel (Right Spindle Stroke): 850 mm / Rapid traverse: 30 m/min Spindles - Spindle standard: DIN 55026, size A26 - Maximum spindle speed (Left/Right): 4500 rpm - Power at 100% duty cycle (Left/Right): 15 kW - Main spindle feature: Optional dual-stage clamping cycle - Bar capacity (both spindles): 80 mm Tool Holder with Driven Tools - Tool holder interface: BMT55 - Number of positions: 12-station turret, all driven positions - Maximum speed: 3600 rpm - Milling motor power: 5.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, 217A GL fuse - Connected load: 71.9 kVA Dimensions - Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm - Weight: 14,000 kg Gbodjxxvy Uopfx Aayot Main Features and Capabilities: - Horizontal design: Optimized for chip evacuation and easy loading/unloading - CNC control: Fanuc 18i-TB, 2CPU, 2-path control - Enhanced hydraulic unit: Hazabal S.L. GH1018/008 - Chip conveyor - Bar feeder interface - Automation interface available - Documentation: Electronic and printed manuals available Machine status: NOT WORKING - Servo drive failure on lower turret - Lifetool reduction gearbox on lower turret broken – requires replacement