Used Nef Lather for sale (231)

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min spindle motor 12 kW Psdpfxoy A Tdbj Acrspr In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Interpolating C-axis Ppodpoy Dckajfx Acrjr Reinforced coolant pump 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Ppjdpfx Aey E Tvvscror Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Gildemeister NEF 320 / Cycle Lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Ppjdpjy Ev I Ujfx Acrer Multifix toolholder, Tailstock, 2 steadies, Accessories,

Condition: excellent (used), GILDEMEISTER Cycle Lathe Model NEF 320 Year of manufacture: 2003, with only 5,653 power-on hours (spindle hours approx. 1,200 estimated!) CNC Control: SIEMENS 810 D with Manual Turn software Work Area: Centre height: 160 mm Centre distance: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Chuck diameter: 200 mm Cross travel: 185 mm Spindle: Spindle nose DIN 55027: Size 6 Spindle bore: 50.8 mm Spindle taper: MK 6 Spindle diameter in front bearing: 85 mm Main Drive (AC): Main drive: 100% duty cycle, 9.0 kW Max. torque: 100% duty cycle, 410 Nm Speed range: 10 – 4,000 rpm Speed control: stepless Gear stages: 2 (ZF gearbox) Feed Drives (AC): X-axis feed force: 100% duty cycle, 3,000 N Z-axis feed force: 100% duty cycle, 6,000 N X rapid traverse / feed speed: 8 m/min Z rapid traverse / feed speed: 10 m/min Tailstock: Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: MK 5 Machine Dimensions: Length: 2,450 mm Height: 1,825 mm Width/depth: 1,815 mm (2,400 mm with electrical cabinet doors open) Weight: 2,000 kg Connected load: 14 kVA Includes: SCHUNK ROTA-Plus 3-jaw wedge-bar power chuck Ø 200 mm Multifix quick-change tool post size B 5 MULTIFIX tool holder cassettes size B Live centre Quick-action drill chuck Removable chip tray Coolant unit Electrically interlocked chuck guard Machine leveling feet Operating manual Ppodpfx Acsy D Epljrjr Condition / Description: +++ Very good +++ The NEF 320 comes from a vocational training institute and has seen very little use (see power-on hours). It was mainly used for training and demonstration purposes—no production workload! The machine bed is essentially in as-new condition. Backup battery replaced; data backup performed. The machine is impressive thanks to its performance and the professional SIEMENS 810 D control with user-friendly MANUAL TURN software. Function videos can be provided upon request.

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: Ppedpfoxrg S Iex Acror X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: repair required (used), Year of construction: 2002, functionality: not functional, turning length: 750 mm, swing diameter over bed slide: 320 mm, type of input current: three-phase, We offer this used Gildemeister NEF 320 cycle-controlled lathe, year of manufacture 2002. Control system: Heidenhain 4110 Control does not boot up, see error message in the photo. A floppy disk with the machine data is available. Other condition unknown, as it comes from the closure of a model making company. Machine is still under power. Ppodpfxsypwhvs Acrsr Crane loading onto your truck is possible.

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 Ppodpfxswtct Hs Acrsr revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm Psdeyxm Tnspfx Acrepr X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: good (used), Year of construction: 1996, Description: For sale is a Gildemeister NEF Plus 710 lathe, year of manufacture 1996, in operational condition and ready for immediate use. The machine has been regularly maintained and is in good condition. Ideally suited for precision turning of metal and plastic components. General technical specifications of the Gildemeister NEF Plus 710 (Year: 1996) Technical Data: Machine type: CNC lathe Model: NEF Plus 710 Year of manufacture: 1996 Control: Siemens 810T (or comparable) Workpiece diameter: max. 710 mm Turning diameter: max. 710 mm Turning length (range): up to approx. 1000 mm Spindle speed: 30 – 2,500 rpm Drive power: 15–22 kW (depending on version) Spindle mount: A2-6 Cooling: Integrated coolant system Included: Tool holder (VDI), standard equipment Special Features: Operational condition: The machine is fully functional and ready for use. Location: Collection in Langenfeld (NRW), Germany. Price: €13,500 plus VAT. The lathe is perfectly suited for all types of CNC turning applications and offers excellent cost-effectiveness for workshops and manufacturing companies. Contact: Please send a message for further information or to arrange a viewing appointment. Psdpfx Ajygdgajcrepr Important information: All information is subject to change, prior sale, errors, and availability. Technical data and all provided information are non-binding and for guidance only. Contact: If interested or to arrange a viewing, please send a message or schedule an appointment. Disclaimer: The item is sold as described. Returns, guarantee, and warranty are excluded. The buyer agrees that the item is purchased "as seen" and without any right of return. No liability is accepted for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above terms and conditions.

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following Pjdoub Amlopfx Acrepr centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Ppedpoyyniaofx Acrer

Condition: used, mileage: 191,000 km, power: 140 kW (190.35 HP), first registration: 06/2020, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 2,020 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, 1st hand - German fire service vehicle. Only 191,000 kilometers driven, in operational duty until recently. Base vehicle: VITO MIXTO 119 CDI 4matic 4x4. Long wheelbase 3200 mm. Sliding doors on both sides with soft-close assist. WAS conversion as an emergency doctor vehicle / NEF (emergency medical vehicle) with cooling box, pull-out drawers and various cabinets. 3 registered and available seats as per current operational configuration / quick-release seat rail system. Regular inspections at WAS. Diesel engine with 140 kW / 2143 cc and Euro 6. 7-speed automatic transmission GTronic. Automatic climate control. Auxiliary heater. Driver fatigue detection - AttentionAssist. ABS + ASR, ESP, lane keeping assist / crosswind assist, hill start assist, cruise control, multifunction steering wheel, MB emergency call system, etc. Central locking with remote keys (4 original keys included). Unladen weight according to vehicle documents: 2705 kg. Gross vehicle weight: 3200 kg. Overall length 5.14 m / width 1.93 m / height 2.02 m. Podpfx Acsyxunyeropr Special signal system: HÄNSCH DBS5000 / front strobes Standby L54 / HÄNSCH 620 with Martin horn. Retroreflective rear warning markings from design112. Speed limiter 160 km/h. Currently fitted with winter tires. The vehicle comes with 8 tires in total, including the second set of wheels as shown. Tire size is 225/55R17C. The vehicle is immediately ready to drive and in good condition. The Vito runs very smoothly. Last service at Mercedes-Benz at 178,000 kilometers. No error messages present. Various documentation on special installations, the WAS inspection booklet, the COC certificate from Mercedes, and the 2020 individual approval as an emergency vehicle are included as original documents. This offer is only valid for commercial buyers of any kind as well as governmental and emergency services (BOS/authorities). Sale to private end users is strictly excluded. Subject to prior sale and errors. Purchase price is subject to differential taxation according to §25a UStG, so gross=net. 19% VAT does not need to be paid in addition, but cannot be deducted either. We will take your old emergency vehicle in trade-in by arrangement. Please feel free to contact us.

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Pedpoyxnugjfx Acrjpr

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 08189, turning length: 660 mm, spindle speed (max.): 4,000 rpm, center height: 260 mm, controller model: ELTROPILOT EPL 1, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Max. turning length: 660 mm Spindle speed: 4000 rpm Centre height: 260 mm Spindle bore: 40 mm Tool holder: VDI 30 Number of turret positions: 12 Turret manufacturer: SAUTER MACHINE DETAILS Control: ELTROPILOT EPL 1 Operating voltage: 380 V Frequency: 50 Hz Rated current: 63 A Dimensions & Weight Dimensions (L x W x H): 2500 x 2000 x 1800 mm Machine weight: 2500 kg Pjdjyk T Egepfx Acrspr EQUIPMENT Workshop cabinet with matching accessories External reference: 13

Condition: not inspected (used), operating hours: 47,019 h, functionality: unexamined, machine/vehicle number: 320678, turning diameter over cross slide: 185 mm, turning diameter: 280 mm, spindle bore: 50 mm, chuck outer diameter: 110 mm, controller model: ELTROPILOT EPL 2, number of slots in tool magazine: 16, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect the item on time between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle bore: 50 mm Chuck diameter: 110 mm Turning diameter over bed: 280 mm Turning diameter over cross slide: 185 mm Centre height: 240 mm Bed width: 250 mm Ppedpfx Aeyk Eq Uscror Number of turret stations: 16 MACHINE DETAILS Control: ELTROPILOT EPL 2 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Connection: 18 kVA Dimensions & weight L x W x H: 3000 x 1700 x 1800 mm Machine weight: 1,500 kg EQUIPMENT Chip conveyor External reference: 5

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Ppodpfoyvy Rnex Acrjr Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: used, Year of construction: 2003, turning diameter 320 mm turning length 750 mm control Siemens type 810DL CCUO turning diameter over slide rest 150 mm cross movement 185 mm spindle passage 52 mm turning speeds 14-3550 U/min transmission ratio 2 quill stroke 120 mm rapid traverse 6 m/min main drive motor 7 kW 3-jaw-chuck diameter 200 mm total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m 8950 turning hours Ppsdpfoyutucjx Acrer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2002, turning diameter over cross slide: 150 mm, spindle bore: 52 mm, turning length: 750 mm, turning diameter: 320 mm, center width: 750 mm, quill stroke: 120 mm, quill diameter: 70 mm, center height: 160 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, total length: 2,800 mm, total width: 1,820 mm, total height: 1,750 mm, spindle motor power: 9,000 W, overall weight: 2,000 kg, NC lathe, control Heidenhain Manualplus 4110, capacity Ø 320 mm, between centers 750 mm, motor 9 kw, spindle speed 20 - 4000 rpm, bore Ø 52 mm, 3- and 4-jaws chucks (6), soft chucks, tool post Multifix + Capto C3 with holders, turning pins, drilling chuck, coolant system, several accessoires in cabinet, manual, YOP 2002, 13'600h, in TOP condition Psdpfoyymx Tex Acrepr

Condition: used, turning diameter 710 mm turning length 2000 mm control Heidenhain type Manuel Plus turning diameter over slide 410 mm x-travel 385 mm turning speeds 9-1800 U/min transmission ratio 2 drive capacity - workpiece 22 kW Torque 2500 Nm spindle diameter 160 mm spindle passage 92 mm total power requirement 49 KVA weight of the machine ca. 5,6 t dimensions of the machine ca. 5x2x2,2 m Spindle nose DIN 55027/11 Toolholder: Type MultiFix C Tool holder Capto C4 Tailstock: Tailstock mount MK 6 Quill diameter 110 mm Pjdpfx Acsyqtnboropr Quill stroke 210 mm Feed rates: Rapid traverse (X/Z) 8/10 m/min Maximum feed rate 5,000 mm/min Maximum feed force 2,000 daN The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), mileage: 104,327 km, power: 140 kW (190.35 HP), fuel type: diesel, emission class: euro6, Year of construction: 2019, Field of application: Freight transport Engine capacity: 1.950 cc Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Ppsdpfxjygg I Ts Acrsr Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2019 Condition: Used Data: First registration: 09/2019 Fuel type: Diesel Mileage: 104.327 KM Gear type: Automatic Drive type: Four-wheel drive Engine power/displacement: 140KW / 1950 cm³ Total permissible weight: 3200 kg Environment badge: Green / Euro 6 Colour: White color with foil coating Equipment: Daytime running lights, automatic climate control, seats: 3, airbag, electric windows and side mirrors, central locking, ABS, ESC, radio, power steering Information: According to DIN 75059: pressure chamber loudspeaker, Martin system, LED signaling system, accident data recorder, thermal compartment, refrigerated compartment, hands-free mobile phone system, rear compartment cabinet, doctor’s seat, work table. Location: 41468 Neuss immediately available

Condition: good (used), mileage: 106,608 km, power: 140 kW (190.35 HP), fuel type: diesel, emission class: euro6, Year of construction: 2019, Field of application: Freight transport Engine capacity: 1.950 cc Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2019 Condition: Used Data: First registration: 09/2019 Fuel type: Diesel Mileage: 106.608 KM Gear type: Automatic Drive type: Four-wheel drive Engine power/displacement: 140KW / 1950 cm³ Total permissible weight: 3200 kg Environment badge: Green / Euro 6 Colour: White color with foil coating Podpfxjygg Iys Acrspr Equipment: Daytime running lights, automatic climate control, seats: 3, airbag, electric windows and side mirrors, central locking, ABS, ESC, radio, power steering Information: According to DIN 75059: pressure chamber loudspeaker, Martin system, LED signaling system, accident data recorder, thermal compartment, refrigerated compartment, hands-free mobile phone system, rear compartment cabinet, doctor’s seat, work table Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Psdpfx Asyrggmocrepr Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: excellent (used), Year of construction: 2005, CNC Lathe GILDEMEISTER NEF 400 Year of manufacture: 2005 Control: Siemens 840 D Technical specifications: Turning length: 650 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 270 mm Spindle bore: 65 mm Travel X-axis: 220 mm Travel Z-axis: 700 mm Max. main spindle speed: 4,000 rpm 8-position tool turret Machine weight: approx. 3,175 kg Pedjyin Imopfx Acropr

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Podpfoyh Hg Nex Acrspr Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection