Used New Bandsaw for sale (19,024)

Condition: used, This listing is for a Eppendorf New Brunswick Innova 2300 Benchtop Open Air Shaker Djlsxzg Izohccqtjck For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study.

Condition: refurbished (used), Kolbe stainless steel Bandsaws - 7 machines in total Model K430 S Year 2018 Fixed table Excellent condition Dcjlhccqjvzmmujtek

Condition: used, Year of construction: 2005, quick coupler Ja serial number LA03050 ja Dcslhcszn Ainocqtsk ja chain condition 60 % weight 31600 kg

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, Rev. Speed: 9 revs/min Height: 900 mm (35.43 in), adjustable ±50 mm (±1.97 in) Diameter: Ø 1150 mm (45.27 in) Electricity supply: 250 W, 1 A, 230 V, 1 Ph, 50 Hz (110 VAC, 2 Amps, 60 Hz) Dcslstp I Dcshccqtok Castor wheels with brakes Load: 80 kg (176 lbs) Materials used: stainless steel AISI304, food grade ALU and PE CE marking

Condition: used, Year of construction: 2009, operating hours: 11,707 h, Equipment: all wheel drive, Internal vehicle number: G300381 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova New Holland F106.6A 6x6 All-Wheel Drive Grader | Approx. 12 Tonnes | Year 2009 Used New Holland F106.6A motor grader, manufactured in 2009. The machine features 6x6 all-wheel drive and an operating weight of approximately 12 tonnes. The grader is ideal for road construction, surface levelling, earthmoving and maintenance work. Technical details: * Manufacturer/Model: New Holland F106.6A * Machine type: Motor grader * Year of manufacture: 2009 * Operating hours: 11,707 hours * Weight: 11,500 kg * Weight class: Approx. 12 tonnes * Drive system: 6x6 all-wheel drive * Environmental badge: None * Technical inspection: New * Vehicle number: G300381 * Condition: Used * German machine Inspection possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Note: The specifications list both 10,700 and 11,707 operating hours. The more precise value of 11,707 hours has been used for this description. Financing example: * Internal number: G300381 * Purchase price: €53,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €839.80 * Residual value: €9,980.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). Dcslhjxnulboccqtsk We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2005, operating hours: 8,315 h, Stock number: 5799 New Holland MH Plus mobile excavator with variable-geometry boom and 2-jaw grapple ----* Manufacturer: New Holland * Type: MH Plus * Year of manufacture: 2005 * kW: 98 kW / 133 hp * Tires: 10.00 - / Dual tires * Operating hours recorded: approx. 8,315 hours * Color: Yellow * Enclosed cabin * Variable-geometry boom Djlhszntg Rsccqtock * Grapple * 270-degree camera * Rotating beacon * Maximum speed: km/h * Additional hydraulic connections * Work lights on the front of the cabin roof * 270-liter diesel tank * 140-liter hydraulic tank Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or information. We assume no liability for errors, changes, or sales to other parties. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Year of construction: 1989, color: red, Applicable material: Hay Bale width: 1200 Bale height: 900 Dolhceziplrscqtjck

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Djlhcjyuuc Ijcqteck Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Dcslhoyuubdsccqtsk Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Dslhoua U Hzjccqtsck Inside : polished weld Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Possible to choose color of outside plates if you need insulation.

Condition: used, Year of construction: 1999, operating hours: 7,259 h, Equipment: all wheel drive, Backhoe loader New Holland LB 115, 4 PS, with articulated steering (crab steering), tires in like-new condition, backhoe has Austrian registration documents, weight: 8,300 kg, serial number: 031015705, contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German), phone number: [phone number]. Subject to errors and prior sale! Delezp Sy Ejhccqteck Please note: Our office will be closed from August 1st, 2026, to August 16th, 2026, due to company holidays. We will be available again starting Monday, August 17th, 2026!

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Dslhccsyl S S Ujqtsck

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD Dcolhccqoyzliyetek GOOD CONDITION Price is Ex VAT.

Condition: used, Year of construction: 2007, operating hours: 11,659 h, Internal vehicle number: MK300034 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. Dolhccjyzk Iujqtjck We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-Series, approx. year of manufacture 2012) 110 hp Very good condition Approx. 7000,- Dcelhccexnvlveqtsk

Condition: good (used), functionality: fully functional, power: 216 kW (293.68 HP), fuel type: diesel, overall weight: 24,000 kg, Year of construction: 2008, operating hours: 9,800 h, Equipment: all wheel drive, cabin, New Holland W270B wheel loader, year of manufacture 2008, approximately 9,800 operating hours, in good condition, immediately ready for use, permissible total weight 24,000 kg, transport and delivery possible, located near Lübeck, viewing possible at any time. Dslhcozbuqlscqtjck

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Dcelheyvutwoccqtjk Qty 2 available

Condition: used, Year of construction: 2009, operating hours: 12,395 h, Equipment: all wheel drive, Internal vehicle number: G400017 Available immediately on our premises in Kaufungen. For more information, please contact: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Dslhccqeyvm Awotjck Operating hours: 12,395 Air conditioning Quick coupler Lehnhoff MS08 Weight: 8,590 kg Blade Engine: Isuzu Deep excavation bucket, 400 mm cutting edge Deep excavation bucket, 900 mm cutting edge Grapple, 600 mm Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA Djlhccqjyug R Rotsck • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 537 kW (730.12 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,481 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,530 mm, total height: 2,300 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30KAV 0550 0038 537 KW Cooling capacity: 537.0 kW / 152.69 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube + 2 pcs. Plate (Economizer) + 2 pcs. Plate (Recuperation) Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06ZCE1H3AA06013 (screw, inverter) Type of refrigerant: R134a Number of fans: 6 pcs. (Frequency inverter) Dimensions: 5.53x2.25x2.3 m Weight: 5481 kg Working hours: 971/793 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Dcolhccozm N Uhoqtok Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 75.14 kW (102.16 HP), type of input current: three-phase, type of cooling: air, overall weight: 585 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, AIRCOOLED CHILLER YORK YSAQ 75 L.FSC.KM.AVM 75.14 KW Deljzm Ny Rohccqtsck Cooling capacity: 75.14 kW / 21.36 tons (12/7 — 35°C) Year of manufacture: 2022 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP154KCE-TFD-477 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. (Frequency inverter) Dimensions: 1.16x2.18x2 m Weight: 585 kg Working hours: 1/1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Dcoljcr Ru Dehccqtsk Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Dolhoubbp Soccqtock Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Electrical Box: 960LBS. IG 280 SD Features • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Dcolhcconzib Eeqtek Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Dcslhcenxk N Sscqtjk Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer