Used Band Sawmill In Vietnam for sale (18,432)

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Ndedozk Exdopfx Afwea Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm Ndsdpfx Afsy Na Hvjwja – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: new, Year of construction: 2026, CORMAK E910 Band Sawmill for Wood The CORMAK E910 Band Sawmill is an advanced band saw designed for professional sawmill operations. Featuring a robust four-column frame, a large cutting capacity, and a reliable 7.5 kW (400 V) electric motor, it delivers precise processing of both softwood and hardwood. An integrated blade cooling system and reinforced cutting head guidance make the E910 one of the most efficient and durable band sawmills in its class. Key Advantages of the CORMAK E910 Maximum cutting width: 915 mm (without log guides), 750 mm (with log guides) – allows cutting of large logs while maintaining excellent stability. Maximum cutting height: 740 mm – adjustable cutting head enables precise cutting of materials with various cross-sections. Cutting length: 6,000 mm – suitable for processing long logs without the need for repositioning. Dynamically balanced cast-iron flywheels – ensure smooth, stable, and reliable blade operation. Manual feed and height adjustment – provide complete operator control over the cutting process and machine settings. Integrated blade cooling system – prevents blade overheating and extends blade service life. Ndsdpevvr Sxsfx Afwja Blade guard – enhances operator safety in compliance with applicable safety standards. Rigid machine frame – minimizes vibration and ensures consistently straight, accurate cuts. Construction and Technology The CORMAK E910 is built on a rigid four-column frame with reinforced rear support, providing exceptional structural stability. It is equipped with a high-quality 35 mm wide, 4,013 mm long bandsaw blade operating at a speed of 20 m/s, ensuring fast, efficient, and accurate cutting. The cutting head is manually operated, giving the operator full control over the cutting process and allowing precise adjustment to different workpieces. As standard, the machine includes a 12-litre coolant reservoir, significantly reducing blade wear and improving cutting performance. Precision and Productivity The CORMAK E910 has been designed for continuous operation in sawmills and wood-processing facilities. Its substantial weight (488 kg), wide rail base, and dynamically balanced flywheels provide excellent cutting accuracy and repeatability. With a maximum cutting thickness of 475 mm, the machine easily handles large-diameter logs. The kerf width of just 1.4–2.2 mm minimizes material waste and maximizes timber yield. Standard Equipment 4,013 mm bandsaw blade 6,000 mm rail track set Blade cooling and lubrication system Blade guard Adjustable log clamp/stop FREE bandsaw blade – machine supplied ready for operation Technical Specifications Specification Value Power supply 400 V Motor power 7.5 kW (10.2 HP) Maximum cutting width 915 mm Maximum blade height 740 mm Minimum blade height 55 mm Maximum cutting thickness 475 mm Maximum cutting length 6,000 mm Blade guard Yes Blade width 35 mm Blade length 4,013 mm Flywheel diameter 470 mm Flywheel width 25 mm Blade speed 20 m/s Kerf width 1.4–2.2 mm Coolant tank capacity 12 L Feed system Manual Machine dimensions (L × W × H) 6,000 × 1,980 × 1,810 mm Net weight 488 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), type of input current: AC, saw band width: 50 mm, Width of saw 50mm Nodpfx Ajq Hhluofwoda Width between rollers 90cm Wheel diameter 62cm Main motor 15 kW Full hydraulics

Condition: excellent (used), Overall dimensions length 4500 mm width 1900 mm height 1750 mm height of feeder top 860 mm Weight 1100 kg Dimensions of processed raw material height 280 mm width 300 mm length from 500 to 3000 mm Power supply 400 V (3 phase) Feeder feed smooth, controlled by inverter speed 4-13 m/min Width of the main belt feeder 200 mm Diameter of pulleys 600 mm Blade parameters length 4000 mm width 30 ÷ 42 mm thickness up to 1,1 mm Raw material pressure spring Ndsdpfsugp Rnjx Afwsa Setting of cutting thickness manual Throughput per hour up to 3 m3

Condition: excellent (used), Overall dimensions Nsdpfx Asugp Imsfweda length 4900 mm width 1600 mm height 1950 mm height of feeder top 860 mm Weight 1200 kg Dimensions of processed raw material diameter up to 400 mm length from 500 to 3000 mm Dimensions of the received prism from 55 mm Main motor power 2 x 5,5 kW Power supply 400 V(3 phase) Electric head extension Feeder feed smoothly controlled by inverter speed 4-9 m/min Diameter of pulleys 600 mm Blade parameters length 4000 mm width 30 ÷ 42 mm thickness up to 1,1 mm

Condition: used, functionality: fully functional, input voltage: 380 V, cutting height (max.): 600 mm, cutting width (max.): 550 mm, control type: manual, actuation type: electric, total height: 2,600 mm, total length: 18,000 mm, total width: 3,500 mm, overall weight: 4,184 kg, Equipment: documentation/manual, motor brake, For sale: JAROMA DRCC-110 vertical wide-band sawmill. This is a saw with a feed carriage, log manipulation system, longitudinal feeder, and log infeed device. Designed for longitudinal cutting of logs into boards and squared timber. Saw wheel diameter: 1100 mm. Cutting speed: 38 m/s. Carriage working speed: 1–40 m/min. Bandsaw width: 130 mm. Very well-suited for cutting curved logs. Includes a cross-feed conveyor for the log storage area. Nedpsyqx Uyefx Afwjda

Condition: excellent (used), Overall dimensions Length 4500 mm Width 1900 mm Height 1750 mm Feeder table height 860 mm Weight 1100 kg Workpiece dimensions Height 280 mm Width 300 mm Ndjdpow R E S Ejfx Afwsa Length from 500 to 3000 mm Power supply 400 V (3-phase) Feeder feed Variable, controlled by frequency inverter Feed speed 4-13 m/min Main belt feeder width 200 mm Pulley diameter 600 mm Saw blade parameters Length 4000 mm Width 30 ÷ 42 mm Thickness up to 1.1 mm Workpiece hold-down spring-loaded Cutting thickness adjustment manual Hourly output up to 3 m³

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Nsdpfxev Sq Hys Afweda Contact for more details or to arrange a viewing! For sale: Band-All BA32-102 Banding Tool

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Ndjdpfxeyh Hc Rs Afwsa

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Nsdpfszudu Sox Afweda Direction - Right to Left.

Condition: new, Holzprofi bandsaw blades are made with high-quality materials and are of carpentry quality! They offer high cutting performance and reliability, making them ideal for workshops and businesses that value quality and precision. Advantages and features: - High-quality bandsaw blade - Tooth tips hardened for long life and precise cutting Length: Ndodezq Dd Sjpfx Afwoa 1750mm, suitable for Hans Schreiner ZHBS, among others 2050mm, suitable for Holzprofi GM 310, among others 2400mm, suitable for Hans Schreiner BS 350, among others 2495mm, suitable for Hans Schreiner BS 350 from model year 2022, among others 2560mm, suitable for Holzprofi SBW3501, among others 2630mm, suitable for Hans Schreiner 12-BS350B, among others 3345mm, suitable for Hans Schreiner HBS-HS400, among others 3430mm, suitable for Hans Schreiner HBS 450, among others 3550mm, suitable for Holzprofi GM 500, among others 3607mm, suitable for Hans Schreiner HBS480, among others 3632mm, suitable for Holzprofi SBW4800, among others 3861mm, suitable for Holzprofi SBW5300, among others 3980mm, suitable for Holzprofi HBS 550, among others 4080mm, suitable for Hans Schreiner HBS-HS 610, among others 4230mm, suitable for Holzprofi GM 620, among others 4318mm 4600mm, suitable for Felder SBW6300, among others 4600x35mm, tooth pitch 12mm 4600x35mm, tooth pitch 22mm 4600x35mm, tooth pitch 22mm X-Cut 5020mm, suitable for Holzprofi FBR700, among others 5070mm, suitable for Holzprofi FBR700, among others 5600mm, suitable for Holzprofi FBR800, among others Width: 06mm (partially) 08mm 10mm 16mm 20mm 25mm 30mm (partially) All other sizes are also possible! From 16.00 EUR Prices depend on length and design. If you have any questions about the correct length/width for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Main engine: 15 kW Electric lifting up / down Smooth feedrate control Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Hydraulics: Hydraulically raised retaining arms loading of the log leveling Ndjdpeu Sg A Uofx Afwsa holdfast chain rotator leveling with hydraulic drive hydraulic aggregate 5.5kW

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line Nodpezdplzofx Afwsda capacity 75,000 m3 timber per shift. Only one operator required. Lisker control for Ari/Kockums line and edging line as well.

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Nsdjy Sv Inopfx Afwjda Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Nedpfx Afozlgd Dswjda Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Year of construction: 2025, operating hours: 90 h, condition: new, functionality: fully functional, Our semi-mobile electric stone conveyor for sorting rollable materials such as stones. To be placed directly behind a drum screen for the separation of stones from green waste, compost, or soil. Easily powered via a 16-amp electrical connection. The conveyor angle and belt speed are adjustable. Demonstration unit from 2025 with Njdpsrhkpzsfx Afwoda

Condition: used, maximum load weight: 27,520 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 07/2026, loading space length: 10,800 mm, loading space width: 2,360 mm, loading space height: 2,130 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Rubber running belt, manual/automatic * Krampe steering system * Belt automatic function * Radio system with remote control * Hydraulic tailgate * 1st axle can be lifted Ndodpfx Aezhfbmofwoa ----* Light alloy rims * Platform with roll-up tarpaulin ----* SAF axles with disc brakes * Wabco trailer EBS-E ----* Tire size: 385/65R22.5 * Technical gross vehicle weight: 38,000 kg * Tare weight: 7,480 kg * Overall length: 11,470 mm * Next inspection due: 02/2027 ----Vehicle number: 12195----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport. ?YOUR VTS TEAM

Condition: ready for operation (used), Year of construction: 2018, A fully automatic side-seal strapping machine Joinpack is available. Load capacity: 50kg, speed: approx. 24rpm, strap width: 9mm/12mm/15mm, strap material: PP, strap tension range: 15kg/70kg, frame opening: 600mm/850mm, sealing height: 650mm. Machine dimensions X/Y/Z: approx. 1450mm/600mm/850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Ndodpfx Afoxvrvmjwja

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. Njdpjzt Ai Eofx Afwoda the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), Bargain: Steel rolling mill with a 50 HP motor. The infeed and outfeed conveyors adjust with the table of the strip mill, which has a width of 1100 mm. Only 600 operating hours. Nedpfxozpyggj Afwoda

Condition: new, The Holzprofi sanding belts are compatible with many different machines from all manufacturers! The Holzprofi Diamond Flex wide belt is the ideal solution for high-quality sanding applications. Specifically developed for use in wide belt machines, this sanding belt offers optimal performance and durability. With its resin-bonded, semi-open grit and antistatic coating, it ensures efficient sanding and minimizes dust formation. The extra-strong backing material guarantees a long service life and is ideally suited for processing all types of wood as well as various metals. Advantages: - Efficient sanding performance and long service life - Reduced dust thanks to the antistatic coating Nsdpfozrlq Aex Afweda - Versatile for use with wood and metal - Robust backing material for high stress High quality – Made in Austria! The following lengths are available: DFN 1030x1900 DFN 1120x1900 DFN 410x1900 (only K60, K80, K100) DFN 457x1003 DFN 650x1900 DFN 650x1600 DFN 650x2200 DFN 930x1900 (only K60, K80, K100, K120) DFN 950x1900 Grit sizes: K60 K80 K100 K120 K150 All other sizes are also possible! Prices from €18.00 Prices depend on length and design If you have any questions about the correct length for your machine, please contact us, and we will be happy to help. Tel.: 00 43 7613 5600

Condition: good (used), Year of construction: 1989, machine/vehicle number: 8906756, functionality: fully functional, actuation type: pneumatic, overall weight: 84 kg, GRASS BBM /ST with adapter for BLUM fittings Row drilling unit – hinge plate drilling – drilling for base plates – drilling for press-in dowels – adapter for pressing in the hinge plates and base plates. Ndedszvn N Nspfx Afwea

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min Nsdpfxotvau Hj Afwsda PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Njdpfx Afezt Iaiowoda Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.