Used Numbering Machines for sale (80,279)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Gedpfxjyzya Ts Af Tjua Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Godpfxjyzxz Ne Af Tjua Coolant tank: 250 l Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Full flexibility for cutting and residual formats Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Guedpfx Ajyzpw Uef Toa Can stack up to two sheets simultaneously

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 3364, product length (min.): 100 mm, product width (max.): 350 mm, product width (min.): 120 mm, product length (max.): 250 mm, production capacity: 10,000 unit/h, TECHNICAL DETAILS Min. format: 100 mm x 120 mm Max. format: 250 mm x 350 mm Maximum parcel thickness: 30 mm Film thickness: 20 to 100 µm Maximum speed: 10,000 / h MACHINE DETAILS Voltage: 380 V, 3F+N+PE Frequency: 50–60 Hz Current consumption: 21 A Air pressure: 6 atm Gedpfxsyzpvwe Af Tjua EQUIPMENT 1 mail feeder shuttle 3 rotary feeders Film packaging section Conveyor belt

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VS8750, resolution (max.): 600 dpi, paper weight (min.): 50 g/m², paper weight (max.): 120 g/m², paper width (max.): 495 mm, TECHNICAL DETAILS Format width: min. 165 mm Format width: max. 495.3 mm Print width: max. 495.3 mm Fold distance: min. 152.4 mm Fold distance: max. 406.4 mm Paper weight: 50 g/m² to 120 g/m² Paper volume: 1.3 cm³/g ± 0.2 cm³/g Resolution (automatic): 240/300 dpi or 600 dpi MACHINE DETAILS Serial number printer 1: 88.136 Counter reading printer 1: 576,660,937 Developer unit replaced at: 421,061,210 Serial number printer 2: 88.137 Counter reading printer 2: 790,048,906 Developer unit replaced at: 638,027,916 Serial number Hunkeler unwinder: UW6 7183.00835-01/08 Year of manufacture Hunkeler unwinder: 2013 Serial number Hunkeler rewinder: RW6 7182 Year of manufacture Hunkeler rewinder: 2013 Interfaces: SRA4 controller, IPDS, TCP/IP Godpfx Afeyzpu Ts Tsua EQUIPMENT Prisma server HP Proliant ML-370-G4 WT4 cross-rotating unit

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: VS8650, resolution (max.): 600 dpi, paper weight (min.): 50 g/m², paper weight (max.): 120 g/m², paper width (max.): 495 mm, TECHNICAL DETAILS Format width: min. 165 mm Format width: max. 495.3 mm Print width: max. 495.3 mm Fold spacing: min. 152.4 mm Fold spacing: max. 406.4 mm Paper weight: 50 gsm to 120 gsm Paper volume: 1.3 cm³/g ± 0.2 cm³/g Godpfxsyzprle Af Toua Resolution: 240/300 dpi or 600 dpi (automatic resolution) MACHINE DETAILS Interfaces: IPDS, TCP/IP Print mode: PDF as IPDS container in I-Mode possible Printer serial number 1: 88.318 Printer serial number 2: 88.319 Counter reading printer 1: 181,986,406 Counter reading printer 2: 181,600,964 EQUIPMENT SRA4 controller WT4 cross-rotation unit Straflors unwinder Straflors rewinder

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,795 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, pump power: 2,200 W, The machine was overhauled in 2026 and serviced every 500 operating hours! TECHNICAL DETAILS Working area X-axis: 1,500 mm Working area Y-axis: 1,500 mm MACHINE DETAILS Pump power: 22 kW (30 HP) Last pump overhaul: 3 operating hours ago Gsdpfxsyzz N As Af Toua EQUIPMENT Spare parts Computer Water softening system

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Gusdpfx Afsyym Eme Tja Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system

Condition: good (used), Year of construction: 1988, Ref: 11084 . 1988 Polar 115 EM 115cm Automatic guillotine Equipped with: Central air table with blower Micro-computer programme with memory bank (99prog/1664 steps) LED display 2 speed back gauge Keyboard programming with static back gauge Gripper margin adjustment for each programme Compensator for print variation Variable pressure clamp Gjdpoy A Rnksfx Af Teua Illuminated cutting area 2 high speed steel knives Light beam guarding Accessories: Pallet lift Specification: Cutting width, Max: 115 cm Clamp opening, Max: 16.5 cm Feed depth, Max: 115 cm Power required : 4Kw

Condition: excellent (used), Year of construction: 2002, Ref: 11085 . 2002 Polar 66 Guillotine 66cm automatic guillotine Equipped with: Keyboard programming with static back gauge Gusdey A Rm Tspfx Af Toa Computer programme with 99 programmes, 999 cuts Metric/Imperial measurement scale Motorised back gauge Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 2-handed cutting operation 10 beam light barrier with FFM guarding Specification: Cutting width: 670 mm Feed depth: 670 mm Clamp opening max: 80 mm

Condition: excellent (used), Year of construction: 1984, Ref:11086 . 1984 Polar 92 SD-P Guillotine 92cm Polar guillotine. Equipped with: Frequency controlled drive motor Variable speed back gauge Variable pressure clamp for various stocks Air table with blower 2 x knives Knife changing device Rear Table Guard Gsdjy A Rmmspfx Af Toua I.R. light barrier guard Including tools & manual. Accessories: Side lift Specification: Cutting Width, Max: 92 cm Clamp Opening, Max: 11 cm Feed Depth, Max: 92 cm Power Required : 3kW

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Guodpfx Afsx U A D Uo Tja Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: used, Makino A77 Twin Pallet CNC Horizontal Machining Centre With Makino Fanuc Professional 3 (16M) Control Gjdpey Amaisfx Af Teua Pallet Dimension 630 x 630mm (4 'T' Slots). Maximum Pallet Load 1,200kg. Maximum Component Dimension Ø910 x 1,000mm. Axis Travel 'X'=800mm, 'Y'=750mm, 'Z'=700mm. Rapid Traverse 'X'=30m/min, 'Y'=30m/min, 'Z'=30m/min. Cutting Feed 'X, Y, Z'=30,000mm/min. Maximum Spindle Speed 10,000rpm (30kW Motor). Spindle Taper ISO 50. 244 Position ATC. Maximum Tool Ø100mm (Non Adjacent Ø300mm), Maximum Tool Length 450mm, Maximum Tool Weight 20kg. (1999) With Through Spindle Coolant System, Dual Auger To Syst Chip Conveyor, Renishaw Spindle Probe Interface, SMC IDF 60 Air Dryer, Kanto Seiki Oil Chiller, Staging, Wash Gun, Hand Wheel, Oil Skimmer, Signal Tower & Manuals. Approx Overall Footprint L7.2 x W3.8m . Weight 18,000kg. Note: Tooling Not Included. Original chiller replaced by a new chiller (leased) - Not Included.

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Godpfsy Amg Aex Af Teua Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2016, condition: excellent (used), ALP Greaser Rotary greaser Gjdey Ax S Depfx Af Tsua Stainless, rotary greasing machine previously used for greasing tins and trays, slat conveyor 1400mm x 300mm, with top mounted rotary greasing head, comes with recirculation pump and tank, mobile, 3Ph

Condition: good (used), Ward Bekker Auger Filler Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph Godpey Ax Rgefx Af Teua

Condition: excellent (used), functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 1,370 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 1,370 mm, spindle speed (max.): 1,800 rpm, table width: 800 mm, table length: 1,625 mm, Boko F30 4 Axis CNC Milling and Boring Machine Gujdpfx Afjyynqde Tsa Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 380 mm, Model: COMET ISOLA ES381 V06 Year: 2004 Control: ISAC ‘X’ axis Stroke: 5500mm Gjdpfsyx Hn Sex Af Tsua ‘Y’ axis Stroke: 525mm ‘Z’ axis Stroke: 380mm Spindle Taper: ISO 40 Spindle Speeds: 24,000 RPM

Condition: excellent (used), Year of construction: 2017, Ref:11008 . 2017 Morgana AutoCreaser Pro 33 User friendly, single operator, standalone machine to crease digitally printed, heavy weight or cross-grained stock. Features: Morgana AutoCreaser Pro 33: Uses a unique creasing rule and matrix system to prevent cracking & tearing. 7" 'SmartScreen' touch screen controls all main functions. Automatically calculates where the creases need to be and sets them accordingly. Alpha-numeric memory allows an unlimited number of jobs to be stored. ‘PosiFeed’ feed system allows product to be piled higher and able to feed difficult stocks. Specification: Feeding System: Bottom suction feed Max. Sheet: 700mm x 330mm (27.5” x 12.6”) Min. Sheet Size (in automatic mode): 210mm x 140mm (8.5” x 5.5”) Guodpfxjw U Ddbe Af Toa Max. Paper Thickness: 0.4mm (varies according to hardness, fold type & substrate) Max. No. Creases per Sheet: 16 Min. Distance Between Creases: 0.1mm Max. No. Stored Programmes: Unlimited Min. Crease Distance from Leading Edge: 2.5mm Min. Crease Distance from Tail Edge: 35mm In Hand Feed Mode up to 2499.9mm to Last Crease can be Programmed. Speed per Hour (A4 in half): 8500 Speed per Hour (A5 in half): 11000

Condition: good (used), Year of construction: 2002, Ref:11061 . 2002 Polar 78ES Guillotine Programable 78cm guillotine. Comprising: Central air bed Polar graphic operator guidance and colour TFT display Keyboard programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Guedpfoya E R Tox Af Toa Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding 2 knives Tools and manuals. Specification: Cutting width, Max: 78 cm Clamp opening, Max: 11.5 cm Feed depth, Max: 78 cm Power required (main drive) : 1.9 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. Gujdpfjx Uym Hox Af Tja WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: excellent (used), Overview The Morgana AutoCreaser Pro 50 is a high-performance, fully automatic creasing and perforating machine for SRA3 and B3 sheets. Upgraded from its predecessor, it features the advanced Pro SmartScreen touchscreen interface, making setup quick and intuitive. Capable of handling 80–400gsm stock, the Pro 50 delivers precise, professional results at high production speeds—up to 8,500 A4 sheets per hour or 11,000 A5 sheets per hour. Godpfx Afsyz A Nds Teua This 500mm machine supports vertical and horizontal creasing and is ideal for commercial printers, digital print shops, and in-plant finishing operations. The intuitive interface allows operators to select fold types, input sheet size, and make adjustments instantly, reducing setup time and improving productivity. Key Features 7" Pro SmartScreen touchscreen – easy, intuitive job setup and control Fully automatic operation – feeds, creases, and perforates with minimal operator input High-speed productivity – 8,500 A4 sheets/hour, 11,000 A5 sheets/hour Versatile creasing – up to 16 creases per sheet, vertical and horizontal Wide stock compatibility – 80–400gsm, up to 0.4mm thickness Large sheet capacity – up to 700mm × 500mm Unlimited job memory – store and recall multiple jobs with alphanumeric naming Standard perforation – with multiple wheel options for custom finishes Why Choose the Morgana AutoCreaser Pro 50? Fast and accurate finishing for brochures, book covers, greeting cards, menus, and mailers Reduced training time with touchscreen controls and automatic setup Handles high-volume jobs without loss of precision Versatile and reliable – suitable for digital and commercial print applications Specifications Manufacturer Morgana Model Autocreaser Pro 50 Min sheet size 210mm x 140mm Max sheet size 700mm x 500mm Min paper weight 0.11mm (approx 80gsm) Max paper weight 0.4mm (approx 400gsm) Max number of creases 16 per sheet Min repeat crease 1mm Power requirements 240v 50/60hz Weight 210kg Dimensions (L)2129mm x (W)660mm x (H)1235mm

Condition: good (used), Year of construction: 2021, Koneteollisuus F19S Meat Slicer Guodpfx Afoyzihgj Tja 2021, stainless, designed for cutting fresh and boneless meat into slices or strips, works well for slicing cooked or dried meats, liver, poultry, fish fillets as well as fruits and vegetables, up to 1500Kgs per hour, mobile, 1Ph

Condition: used, Model: CW Gusdoyx Hx Depfx Af Toa Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Godpfx Aoyx Hw Tjf Tjua Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg