Used Numbering for sale (27,928)

Condition: good (used), Year of construction: 2022, functionality: fully functional, oscillating roller Psdpfxjxyfmmo Adiegw 2 numbering units cross feeder

Condition: used, The Heidelberg MO Numbering & Perforating Unit is a machine with a format of 480 x 650 mm, currently located in Germany. It is equipped with 1 inking unit, 2 linear perforating arms, 2 mounting rings, and 1 numbering shaft. Format: 480 x 650 mm Pjdpfsvfxqgsx Adijgw Equipment: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Condition: good (used), Year of construction: 1984, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 51510274, type of input current: three-phase, input current: 7 A, input voltage: 380 V, Equipment: documentation/manual, Machinenumber 51510274 Year of built 1984-85 Good condition, normal light-soiling Molleton dampening 2 mounting rings in NP unit NO numbering blocks included (zeiser equal to GTO, Fuji etc) Under power in our warehouse. To be delivered EXW van Rooij, loaded on your transport (LOT) Technical Data • Maximum sheet size: 381 × 520 mm • Minimum sheet size: 110 × 148 mm • Maximum printing area: 370 × 515 mm • Maximum printing speed: 10,000 iph • Minimum printing speed: 3,000 iph • Feeder capacity: 940 mm • Delivery capacity: 420 mm • Stock range: 30 up to 350 g/m² • Maximum paper thickness: 0.4 mm Printing plate dimensions: 0.15 × 521 × 420 mm Blanket dimensions: 1.9 × 524 × 480 mm • Press drive motor — power: 1.5 kW • Air pump motor — power: 1.5 kW • Electric motor delivery raising: 370 W • Inching: 120 W Machine dimensions • Length: 2,200 mm • Width: 1,185 mm • Height: 1,570 mm • Machine weight: 1,550 kg Pjdpfx Adst Etitsisgw

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Psdsvcxwnepfx Adisgw

Condition: excellent (used), Format (cm): 32x52 Pgodpfxsh Eik Hs Adiow All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Year of construction: 2001, condition: used, machine/vehicle number: 361748, Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&PYear 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes Pgodsmikq Hepfx Adiow 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, The Heidelberg SM 74 Numbering & Perforating Unit is a machine with a format of 520 x 740 mm. It is currently in stock and located in Germany. The machine is equipped with 1 inking unit, 1 numbering shaft, 2 perforating arms, 2 mounting rings, and 1 cam left and right. The delivery terms are FCA. Format: 520 x 740 mm Equipment: 1 cam left and right 2 X Mounting Rings 2 Perforating arm Pgodevfx E Repfx Adiew 1 X Inking Unit 1 X Numbering Shaft

Condition: excellent (used), Format (cm): 32x46 All existing tools will be included with the device Pgedpfx Adjh Eikmsiew for punching and perforating as well as holders of these tools (see pictures)

Condition: used, Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwardsxx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pedoh Ayd Sspfx Adiegw

Condition: used, Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAVSome Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pjdpfx Adoh Ax Hxoiegw

Year of construction: 1997, condition: used, machine/vehicle number: 790490, Eindruckwerk mit Nummeriereinrichtung / Imprinting Unit Numbering Heidelberg GTO52Year 1997 - SN. 790490 Eindruckwerk / Imprinting Unit Nummerierwelle mit 2 Sitzringen / Numbering shaft with 2 mounting rings 2 Nummerierwerke / 2 Numbering boxes Pgodpfx Adorttudeisw 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 15091, Buchdruck Nummerierwerke für Tiegel - Letter Press Numbering units for Tiegel - Cylinder Sünüm - Leibinger Numbering UnitsLetter Press Numbering units for Tiegel - Cylinder Div. Zubehör + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video Pjdporffnmofx Adisgw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Nummerier- Perforierwerk / Imprinting unit Numbering- Perforation Unit Heidelberg GTO46Nummerier- und Perforierwerk für Heidelberg GTO46 Podpfx Adjh Ayf Nsijgw Imprinting unit Numbering- and Perforation Unit for Heidelberg GTO46 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516221V01776, Year of construction: 2019, operating hours: 4,964 h, load capacity: 1,600 kg, lifting height: 4,660 mm, free lift: 1,510 mm, mast type: triplex, Equipment: CE marking, TECHNICAL DETAILS Lifting capacity: 1,600 kg Lift height: 4,660 mm Free lift: 1,510 mm Overall height (overhead clearance): 2,060 mm Mast type: Triplex Maximum fork width: 800 mm Minimum fork width: 0 mm Fork dimensions: 1,200 mm x 800 mm Fork length: 1,200 mm MACHINE DETAILS Number of wheels: 3 Dimensions & Weight Dimensions (L x W x H): 1,950 x 1,150 x 2,060 mm Weight: 3,206 kg Electrical data Battery year: 2019 Capacity: 625 Ah Battery voltage: 48 V Operating hours: 4,964 h EQUIPMENT CE marking Side shift Weighing system Free lift Pedpsxw S Ekofx Adiogw New battery Non-marking tyres

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Pgjdpfexvybdox Adijw Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 73866, workpiece weight (max.): 60 kg, rotational speed (max.): 2,300 rpm, overall weight: 5,000 kg, TECHNICAL DETAILS Module, max.: 7 Grinding worm diameter: 280–350 mm Grinding worm width: 84–104 mm Grinding worm speed (grinding): 1,100–2,300 rpm Grinding worm speed (profiling): 50–95 rpm Number of teeth, min.: 6 Number of teeth, max.: 600 Maximum permissible outside diameter: 360 mm Maximum workpiece weight: 60 kg Maximum grinding stroke: 175 mm Workpiece speed (grinding): max. 250 rpm MACHINE DETAILS Machine weight approx.: 5 t Pedsxvrziepfx Adiegw Electrical Data Mains connection: 3 × 400 V 50 Hz Machine voltage: 3 × 400 V 50 Hz Control voltage: 1 × 230 V 50 Hz / 1 × 24 V DC Contactor voltage: 1 × 24 V DC Solenoid valve voltage: 1 × 24 V DC

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,691 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travel Paths & Axes Travel path X-axis: 560 mm Travel path Y-axis: 560 mm Travel path Z-axis: 630 mm B-axis max. rotational speed: 44.4 rpm Rapid Traverse Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece weight: 400 kg Pgedpfxexvzt Ij Adiow Spindle & Tools Max. spindle speed: 14,000 rpm Distance spindle center to top of pallet: 80–640 mm Distance spindle nose to center of pallet: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 573385, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table load: 1,000 kg, Die-sinking EDM machine with MultiChange IMC4 TECHNICAL DETAILS Pgsdpfxoxwktts Adisw Travel X-axis: 525 mm Travel Y-axis: 400 mm Travel Z-axis: 450 mm Y-position electrode changer: 675 mm Drive: AC servo motors, digital Rapid traverse: 2 m/min Digital resolution: 0.001 mm C-axis: 1 - 20 rpm Load capacity with/without changer: 15 / 50 kg Worktable: 730 x 630 mm Load: max. 1,000 kg Dielectric tank: 400 l Filter surface area: 4 m² Lifting tank: 750 x 650 x 420 mm Dielectric height: 375 mm IMC 4 Electrode magazine: double magazine Number of electrodes: 182 Gripper: dual gripper Workpiece pallet magazine: 8 units Size per workpiece: 320 x 320 x 240 mm (alternative) MACHINE DETAILS Main dimensions: 2.2 x 2.15 x 2.54 m Weight, ready for operation: 4.8 t Connected load: 7 kVA IMC 4 Footprint: 2,800 x 4,101 mm Connected load: 11.6 kVA

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN491966, Year of construction: 2015, operating hours: 15,963 h, load capacity: 2,500 kg, lifting height: 5,030 mm, free lift: 1,630 mm, mast type: triplex, fork width: 350 mm, TECHNICAL DETAILS Mast: Triplex Lifting capacity: 2,500 kg Lifting height: 5,030 mm Free lift: 1,630 mm Overall height: 2,290 mm Fork dimensions: 1,000 mm x 1,000 mm Minimum fork width: 350 mm MACHINE DETAILS Number of wheels: 4 wheels Electrical Data Drive: Electric Capacity: 775 Ah Battery voltage: 80 V Dimensions & Weight Dimensions (L x W x H): 2550 cm x 1200 cm x 2290 mm Unladen weight: 4,555 kg Year of battery manufacture: 2018 Operating hours: 15,963 h Pedpfx Adoxw Slqjiogw EQUIPMENT Half cab Work lights Non-marking tires Free lift Joystick Attachment: Fork positioner Side shift

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Pgedpfxexvrv Tj Adijw Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,204 h, functionality: fully functional, turning length: 1,025 mm, turning diameter: 530 mm, travel distance X-axis: 475 mm, travel distance Z-axis: 1,170 mm, quill stroke: 150 mm, controller model: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Pjdpfxsxvzp As Adisgw Maximum workpiece length: 1,025 mm Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Sub spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed rates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Automatic Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (with adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch-on hours: 20,204 h EQUIPMENT Automatic tool change system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub spindle for second machining side Stable turret with ATC system

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Number of blasting turbines: 4 Power per blasting turbine: 22 kW Blasting media amount per turbine: 7 kg/h Blasting throughput: 450 kg/min Blasting velocity: 80 m/s Maximum product dimensions: 1,400 x 1,000 mm Cabin diameter: 2,200 mm MACHINE DETAILS Control system manufacturer: Siemens Pgedsxw Sfqspfx Adijw EQUIPMENT Vibrating sieve for abrasive/blasting materials and discharge products Feeding via external rail system possible CE marking Documentation

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Pgsdsxvq Hdspfx Adiow Taper: NT No. 40 Spindle diameter: 70 mm Feed Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 107402, spindle diameter: 40 mm, number of spindles: 4, Equipment: CE marking, TECHNICAL DETAILS Number of spindles: 4 pcs. Spindle diameter: 40 mm Pgjdpfxexw R Rls Adiow Infeed table length: 1,780 mm MACHINE DETAILS Dimensions (L x W x H): 2,170 x 4,600 x 1,830 mm Feed motor: 5.2 kW Feed drive: Cardan shaft drive Extraction nozzle diameter: 140 mm Voltage: 400 V EQUIPMENT CE marking Note: The machine’s bearings are in poor condition.

Condition: ready for operation (used), functionality: fully functional, pressing force: 400 t, stroke length: 150 mm, number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Pressing force: 400 t Number of cylinders: 10 Cylinder diameter: 120 mm Material of press plates: aluminium Plate thickness: 90 mm MACHINE DETAILS Electrical data Connected load: 7.5 kW Voltage: 380 V Podpfx Ajxw R N Iodisgw Type of heating: Oil Dimensions & Weight Dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Weight: 25,000 kg EQUIPMENT With infeed and outfeed conveyor Heating boiler included