Used Occupational Safety And Health for sale (15,835)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Hodpfxoxqxt Io Af Tjff Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC Hjdpfx Afjxqxw Tj Teff - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2014, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,800 mm, loading space volume: 95 m³, Equipment: ABS, Schmitz Cargobull SCB S3T Safety Roof Edscha Disc Brakes Tail Lift Internal Ref. No. for inquiries: 0226170 * Condition: Very good * Permissible gross weight: 38.00 t * Safety roof * Edscha sliding roof * Lifting roof * First registration: 04/2014 * Storage box on right side / aluminium * Spare wheel holder * ABS * EBS * 3 axles, air suspension * Disc brakes * Tail lift: Dhollandia, load capacity up to max. 2,000 kg Hfodpfx Ajyrkrtof Tjf Cargo space dimensions: * Length: 13,600 mm * Width: 2,470 mm * Height: 2,800 mm Tyres: 1st axle: 385/55 R 22.5, 20% air suspension 2nd axle: 385/55 R 22.5, 20% air suspension 3rd axle: 385/55 R 22.5, 20% air suspension ----Price: 5,900 EUR + 19% VAT For further questions, you can reach us at the following numbers: * Languages spoken: German, English, French, Polish, and ??? Subject to errors, omissions, and prior sale.

Condition: good (used), Safety controller, safety relays, standard master device Hfjdpfex T A Nbjx Af Tof -Manufacturer: REER, Standard Master Device, 8 inputs, 2 OSSD pairs (SIL 3) -Type: MOSAIC M1 -Charge: -Number: 1x Relays available -Dimensions: 110/25/H115 mm -Weight: 0.2 kg

Condition: excellent (used), Nuaire NU-440-600E fume cupboard The Nuaire 440-600 is ergonomically designed for user comfort and offers users more knee room. The Nuaire 440-600 has a unique sealed construction and True Laminar AirFlow HEPA filtration system. The 440-600 biosafety cabinet features the advanced AirFlow Control electronic system with precise programmable controls for a safe, reliable environment. Specifications: Voltage: 230V, 50Hz Current: 11A Downflow 38 M/S Inflow: 46 M/S Included: Hfedjirtxbepfx Af Tsf -2x 230 volt socket -fluorescent lamps Outside dimensions (W) x (D) x (H): 200 x 85 x 150cm Item condition: used More items - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2001, condition: excellent (used), BDK S-1200 Laminar-Flow Safety Cabinet Operating principle The safety cabinet is a laboratory unit in which a largely low-turbulence (laminar) displacement flow prevails in the working chamber. The air flowing through the working chamber, as well as the exhaust air, is cleaned by a high-performance HEPA filter. Scope of performance and equipment - Model design The safety cabinet is manufactured in three different sizes, as BDK-S 1200, 1500 and 1800. - Air monitoring The air flow velocity in the recirculation (downflow work area) and exhaust (inflow exhaust air) areas is monitored with flow probes. Any faults that occur are indicated by a control lamp and signal horn. - Inspection pane monitoring The viewing pane made of laminated safety glass is equipped with a weight compensation and can be moved manually very smoothly and steplessly. If the viewing window is not in the working position (opening greater than 190 mm), this is indicated on the display and by a signal horn. - Control panel All switching elements required for operation, membrane keypad, signal horn and indicator lights, as well as the display for indicating the various operating states are arranged in the control panel. - Microprocessor control The microprocessor control is self-monitoring and permanently displays the airflow speed. - Unit depth< 800 mm (840 mm) Due to the low unit depth, the safety cabinet fits through all common laboratory doors. - Housing design For safety reasons, the housing is made of 1.5 mm thick Zincor sheet metal with welded pressure area. - Contamination areas All contamination areas are flushed with negative pressure. - low sound emissions - glare-free work area illumination - joint-free working area made of stainless steel Manufacturer: BDK Model: S-1200 Type: Laminar-Flow safety workbench Year of manufacture: 2001 new price: 6.500 € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! Hfjdjl Smggopfx Af Tof International shipping costs on request!

Condition: excellent (used), Safetech ST-Alarm-V2 Safety Weighing Cabinet The latest generation of safety weighing cabinets, the ST1 series, is characterized design, especially with regard to personal protection for work with toxic and active work with toxic and active substances. Hfsdpfxeiuxndo Af Tof All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the work opening. As soon as the flow velocity falls below a limit value, both an acoustic and a visual alarm are triggered. Key benefits at a glance: Unique directional airflow guidance through BAFFLE technology. (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabinet design also allows pipette handling Alarm system with two sensors and data logging Vibration-free due to independent filter unit Easy to clean due to removable back panel Without filtration components Further safety weighing cabinets - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Hfjdpfx Afeyur Iue Tof Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Includes a ramp.

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Hfodpsyur Axefx Af Tjf Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Hfodpfx Afoyq Rkyo Tsf Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, This listing is for the Big Neat. F3-XIT Safety Cabinet Hfedjxhff Sjpfx Af Tjf The unit is in full working condition and is ready for immediate use The Bigneat F3‑XIT is a benchtop powder weighing safety cabinet manufactured by Bigneat, tailored to protect operators from exposure to dust and particulates while handling and weighing fine powders. It features a compact footprint and excellent visibility through its acrylic enclosure, ideal for precision work. MedicalExpo DirectIndustry Key Features: Compact design with great all-around visibility, available in two access styles: F3‑XIT‑D: Hinged access flap. F3‑XIT‑S: Corner “tear drop” access. Recirculating HEPA filtration, including a pre-filter and HEPA filter that removes particles down to 0.3 µm with 99.997% efficiency, returning clean air back into the lab. Balanced airflow: Pre-set to a capture velocity of approximately 0.35 m/s, proven to offer both effective containment and stable weighing condition

Condition: used, This listing is for the Dasit Biopharma Faster SafeFAST Classic 209D Microbiological safety cabinet The unit is in full working condition and is ready for immediate use Overview & Compliance Suitable for EN 12469:2000 (EU) and NSF/ANSI 49 (US) standard compliance, the SafeFAST Classic 209 D provides triple protection (user, product, environment) via Class II vertical laminar airflow containment  Airflow: ~70% is recirculated through an H14 HEPA/ULPA filter, ~30% is exhausted via a second H14 HEPA filter  Key Features Construction: Exterior in epoxy‑powder‑coated steel; rear wall meets EN12469 cleanability criteria; segmented work tray of AISI 304L stainless steel, removable for cleaning/autoclaving  Electrical safety sash: Motorised vertical sliding front sash, with standard working aperture of 200 mm (max 490 mm), also hinged for deep cleaning  Airflow & Filtration System: Single or dual centrifugal fans; static negative pressure design ensures all contaminated air is drawn into HEPA filters; avoids positive pressure in any chamber  Control & Safety Systems Hfedjxhftcjpfx Af Tef Microprocessor-based control (ECS™ or similar): Real-time monitoring via rear-lit LCD and touch keyboard, displaying airflow status, filter condition, fan status, and sash position; allows safe operation and data logging  Audio‑visual alarms: Alert the user in case of deviations in airflow velocity, sash mis-position, clogged filter, fan issues, or power loss 

Condition: used, This listing is for the ICN Biomedicals Flow Gelaire BSB Class 2 Safety Cabinet The unit is in full working condition and is ready for immediate use Gelaire Class II Biological Safety Cabinets These are widely used internationally and are known for their high safety, energy efficiency, and ergonomic design. Key features include: Airflow & Protection They employ part-recirculating laminar airflow and separate H14 HEPA systems for both supply and exhaust. The design ensures a consistent air barrier at the front opening and maintains sterile downflow inside, all within a biodynamic sealing system that uses negative pressure around any positive-pressure zones. Hfodpfx Afjxhfpqe Tsf Eco® Control System A smart microprocessor actively regulates airflow to compensate for filter loading, manage power consumption, and maintain safe operational flow rates. Monitoring & Safety Alarms Cabinets offer real-time display of airflow velocities, internal and external temperatures, operation hours, filter life, and fan power factor. Audible and visual alerts warn of airflow deviations or other malfunctions. Standby power-saving modes and “blackout” reporting (in the event of power failure) are included. Construction & Ergonomics The housing features antimicrobial powder-coat finish, and interior zones are stainless steel (Type 304 for work zones, Type 316 for the tray). Hinged or electric sash options (depending on model) and ISO-aligned ergonomic design, noise under 60 dB(A), and smooth operation are standard. Options & Accessories Available extras include gas and vacuum taps, splashproof power outlets, UV germicidal lamps, different exhaust configurations (top, left, right), adjustable stands, carbon exhaust filters, armrests, and fumigation seals.

Condition: used, This listing is for a CAS BioMAT Class 2 Microbiological Safety Cabinet. The unit is in full working condition and is ready for immediate release. The BioMAT 2 combines decades of expertise in containment design to offer a range of Class 2 microbiological safety cabinets that prioritize safety, ease of use, and energy efficiency. It provides protection for operators and products while handling biological agents up to Hazard Group 3. Key Features: - User-Friendly Interface: Equipped with a 10cm x 6cm TFT touchscreen displaying real-time cabinet operations and an animated airflow diagram. Intuitive controls with crystal-clear iconography simplify functionality, while a four-digit password ensures security. - Energy Efficiency: Features energy-efficient EC fan technology and low-loss filters, consuming only 140W under typical operational performance (0.6 m/sec inflow and 0.35 m/sec downflow). The set-back mode reduces energy usage by automatically adjusting settings when the cabinet is unattended. - Safety Mechanisms: Full-width LED lighting provides clear indications of any airflow issues, supported by audible alarms and large red LED alerts for malfunctions. The animated airflow diagram gives instant feedback on cabinet status. - Quiet Operation: Designed with EC fans and noise reduction technology, the typical noise level is just 49dBA for the 1200mm models, ensuring a comfortable work environment. - Sustainability: The BioMAT 2 has achieved CarbonNeutral® product certification, contributing to laboratory carbon reduction goals. Product Specifications: - Construction: - Cabinet: 1.5mm mild steel - Inner Liner: Grade 304 stainless steel - Side Windows: 5mm UV-resistant toughened glass - Front Visor Options: - Fixed 200mm aperture with a night door for fumigation. - Aerosol-tight motorized sliding sash with anti-trap reverse function (BioMAT 2-S2). Exhaust Options: Hedpfx Afexxycto Tsff - Standard Exhaust: Single HEPA filter with anti-blowback damper. - Thimble Exhaust: Double HEPA filters for enhanced safety. - Recirculation: Double HEPA filters with options for vertical or horizontal air discharge. - Worktrays: Made from grade 316 stainless steel, available in single or divided sections to meet user needs. - Support Stands: Options include fixed height, manually adjustable, or fully DDA-compliant motorized stands. Applications - The BioMAT 2 is ideally suited for laboratories handling biological agents and provides a flexible design tailored to specific laboratory requirements.

Condition: used, This listing is for the CEM Smart Trac 11 System Hsdpexv Agiofx Af Tsff Details to follow

Condition: used, This listing is introducing 8 No Envair Mobile Isolators of different specifications currently held in our stock The units are in full working condition and ready for immediate use Envair Mobile Isolator Envair Technology is a UK-based manufacturer specializing in clean air and containment solutions for the healthcare, biotechnology, and pharmaceutical industries. Their product range includes a variety of isolators designed to provide controlled environments for handling hazardous substances, ensuring both operator and product safety. Applications Envair isolators are widely used in a variety of applications including Hfsdpfexv Dhbsx Af Tsf Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage developmen Key Features of Envair Isolators Positive and Negative Pressure Models: Envair offers both positive pressure isolators protect the product from contamination and negative pressure isolators to protect the operator from hazardous substances Compliance with GMP Standards: Many Envair isolators meet EU GMP Grade A and ISO 5 classifications, ensuring sterile, controlled environments. Customizable Designs: Envair provides bespoke solutions tailored to specific client needs, including unique dimensions and technical requirements. Advanced Containment Technology: Isolators are equipped with automated pressure decay leak tests, electromagnetic interlocks for transfer chambers, and integrated decontamination systems. User-Friendly Controls: Most units include intuitive touchscreen interfaces and PLC-based systems for simple and efficient operation. Growing Need for Containment with HPAPIs Demand for personalised medicines containing High Potent Active Pharmaceutical Ingredients (HPAPIs)—particularly in newer super-potent oncology, cardiovascular, and diabetes treatments—is increasing rapidly. These medicines often require shorter turnaround times, forcing pharmaceutical process manufacturers to develop faster, more agile workflows. In such high-risk, high-value settings, a GMP-compliant environment is not optional—it’s critical. It’s easy to overlook the fact that the people developing, manufacturing, and dispensing these complex drugs are at risk of exposure to harmful, sometimes lethal, compounds. Their safety is paramount, given the essential role they play in maintaining a reliable supply of advanced therapeutics. Expertise in HPAPI Handling for CMOs & CDMOs Envair has specialist expertise in helping Contract Manufacturing Organisations (CMOs) and Contract Development and Manufacturing Organisations (CDMOs) safely handle HPAPIs—even within existing non-contained facilities. Their isolator systems are designed, manufactured, and installed to meet rigorous containment performance levels below 1μg/m³ (OEB 5). Each system is custom-engineered for the specific site and process step—whether it’s weighing, mixing, milling, spray drying, or packaging. Applications Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage development

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet with Stand The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet—also known as a biosafety cabinet—designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Hfedsxhfkbopfx Af Tof Protection & Compliance Meets the European standard EN 12469:2000 for microbiological safety cabinets It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Stand The unit is in full working condition and is ready for immediate use Hsdpfx Aexhfpkjf Toff Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Comprehensive IQ/OQ documentation for validation. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB Sand & Salt Spreader RPS 9000 (9 m³) - Winter Road Maintenance The TICAB RPS 9000 is a heavy-duty sand and salt spreader for winter road maintenance, snow and ice control, anti-icing, and de-icing operations. Ideal for highways, municipal streets, parking lots, airports, and industrial surfaces. • 9 m³ hopper for long, uninterrupted spreading • Hydraulic scraper-chain feed & disc drive for uniform application • Wide spreading width: 4–8 m • Optional cab-controlled proportional disc speed and autonomous engine • Quick mounting on trucks for versatile winter service Contact us for price, delivery, and technical details. Ensure safe roads this winter! Hjdpox Uwp Eefx Af Tsff

Condition: new, 3 safety windows suitable for CNC lathe TRAUB Hedow Edq Depfx Af Tsff TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Size: 660 x 480 mm Price: €500.00 / unit net Delivery time: immediately, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), functionality: fully functional, Very nice rotary creasing and perforation machine. Brand: Bacciottini, model Rol 70. Vacuum and air non-stop feeding table with Rietchle pump. Handles paper from 80 up to 600 grams, max format 700 mm. Solid construction, made in Italy. Hsdoxt N Nljpfx Af Tsff Of course, you are welcome to test this machine with us. We can arrange transport and packaging for you and load it into a truck or container. Ask for a price including transport (location: the Netherlands).

Condition: used, Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device Hjdpfx Aotxkplef Teff -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ /2/220VAC/3a/1r -ID no.: 474750 -Number: 1x relay available -Dimensions: 110/90/H80 mm -Weight: 0.7 kg

Condition: good (used), Safety relay, safety control unit, emergency stop switch -Manufacturer: Moeller, safety relays Hfsdpfxskia S Eo Af Tjf -Type: ESR4-NV3-30 -Quantity: 1x relay available -Dimensions: 95/25/H115 mm -Weight: 0.2 kg

Condition: used, Safety relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor Hsdpfx Afeumzl Ee Toff -Type: SVS11/R-2-24 V -Allow. Operating temp.: -20/+50 °C -Response time: 50 ms -Obstacle size: Ø 50 mm -Fuse: M400 mA -Weight: 2.1 kg

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 Hfjdpfxorcnm Nj Af Tef -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg