Used Oil Heater for sale (13,139)

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Fedpfezqdibox Aayspl Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Dimensions: HxWxD 715 x 1120 x 450 mm Weight: 102 kg Fpodsvtl T Dspfx Aayjl Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Fodpfsyw Aa Uox Aayepl Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: reconditioned (used), functionality: fully functional, fuel: electricity, overall weight: 122 kg, warranty duration: 6 months, temperature: 85 °C, KARCHER HDS-E 8/16-4M 24kW HOT WATER PRESSURE WASHER The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. The machine has only 379 hours of operation. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 760 Fsdpezr D Imjfx Aayepl Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Heater power [kW]: 24 Connection power [kW]: 29.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 122 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: excellent (used), mileage: 153,000 km, power: 412 kW (560.16 HP), first registration: 08/2013, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, fog lights, parking heater, power mirror, retarder, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - High beam headlights - Speed limiter - Refrigerator - Air suspension - Particulate filter - Sun visor - Auxiliary heater (parking heater) - Toolbox - Power take-off (PTO) - Central lubrication system = Further Information = Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Steered; Suspension: leaf suspension Front axle 2: Tire size: 385/65/22.5; Steered Rear axle 1: Tire size: 295/80/22.5; Twin tires; Differential lock; Suspension: air suspension Rear axle 2: Tire size: 275/70/22.5; Twin tires; Lift axle; Suspension: air suspension Functional Boom: Telescopic (8 sections) Boom length: 21 m Lifting capacity: 12,000 kg Lifting height: 2,300 cm Crane: HIAB 477-8, year of manufacture 2013, mounted behind the cab Superstructure brand: HIAB 477-8 CE marking: yes Condition Technical condition: very good Optical condition: very good SCANIA R560 V8 8X2 TRACTOR UNIT COMBI + HIAB 477 E-8 CRANE EURO 5 L PACKAGE 560 HP DRIVELINE 8X2 REAR LIFT AXLE WHEELBASE 450 CM Fsdsyiun Hepfx Aayopl AIR SUSPENDED CR19H SLEEPER CAB WITH AIR CONDITIONING, PARKING HEATER, AND REFRIGERATOR AUTOMATIC TRANSMISSION TOOLBOX ADJUSTABLE FIFTH WHEEL TOOLBOXES PREPARED FOR BALLAST FLATBED HYDRAULICS FOR TRAILER HIAB 477 E-8 HIPRO CRANE 8X HYDRAULIC EXTENSIONS OIL COOLER FOR CRANE HYDRAULICS LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS 4X OUTRIGGER SUPPORTS RADIO REMOTE CONTROL MAX LIFTING CAPACITY 12,000 KG MAX LIFTING CAPACITY AT 2080 cm: 1,380 KG WORKING HEIGHT 23.5 METERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: reconditioned (used), functionality: fully functional, empty load weight: 119 kg, input voltage: 400 V, fuel: electricity, temperature: 85 °C, KARCHER HDS-E 8/16-4M 12kW HOT WATER PRESSURE WASHER The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. The machine has only 299 hours of operation. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 760 Fjdpezrxh Ijfx Aayjpl Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Heater power [kW]: 12 Connection power [kW]: 17.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 119 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Fsdpozrgfhefx Aayopl Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 066 404 601, An extrusion tool for the production of PE or PP pipes is offered. Pipe diameter range (min.): Ø90 mm Pipe diameter range (max.): Ø250 mm Output: approx. 1100 kg/h Design: Spiral distributor system, completely made of 42CrMo4 Flow contour polished Equipped with cylinder heaters and M14x1.5 type “J” thermocouples Incl. 3 m connection cable, without plug connector for the extruder Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 7 2 copies of the operating manual in German or English are included in the scope of delivery. The offer includes the following items: - Basic tool PO G 250 - Sheathing package for a max. 10% outer layer Fedpfszhnd Rsx Aayspl - Flex nozzle insert for Ø250/180, with this nozzle insert, all dimensions from Ø250 to Ø180 can be produced in SDR17 + SDR11. - Tool mounting carriage, swiveling by 90° - Internal cooling for oil or water in the spiral distributor - Pipes for a pipe head air cooling system are installed in the tool.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Fpodpfxswugczj Aaysl Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Fsdswahhvepfx Aayopl Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Condition: used, mileage: 264,000 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 6,360 mm, total width: 2,240 mm, total height: 2,980 mm, Year of construction: 2009, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, 1st owner. Well-maintained vehicle. Inspection and TÜV (German vehicle inspection) recently performed. All-wheel-drive ambulance Mercedes Sprinter 515 CDI with WAS box body. Euro 4 engine, 4-cylinder, 2148 ccm / Green environmental badge. 6-speed manual transmission. 148 km/h. All-wheel drive can be engaged via a button. Wheelbase: 3665 mm. CD radio. GARMIN navigation. Automatic climate control (Tempmatik). Airbags for driver and front passenger. Auxiliary heater Eberspächer Hydronic D10W (diesel heater). Fpsdpfx Aaozztm Royol ABS and ASR. ESP. Rearview camera with monitor. Exterior mirrors and power windows. Central locking via remote key. 2 original Mercedes remote keys plus 2 manual box body keys included. Previously registered as "Other motor vehicle, ambulance, closed ambulance". Last registered with green license plates. With emergency warning system. Overall vehicle dimensions: Length 6.36 m. Width 2.24 m. Height 2.98 m. Unladen weight according to vehicle documents: 3785 kg. Permissible total weight: 4600 kg. Electrically extending step at the sliding door on the right side of the box body. 5 registered seats, including 3 emergency seats for accompanying personnel in the box body, plus 1 cot. DUNLOP winter tires from 2015 with snowflake symbol, all in good condition, twin tires at the rear. TÜV valid until 08/04/2026, valid until August 2027. Last inspection at 263,224 km, with oil changes for engine, transmission, front axle, and rear axle. This Sprinter initially operated in regular ambulance service and then only occasionally with the "Ambulance Support Group" in recent years. Despite the limited use, it was always maintained and parked in a garage to ensure full operational readiness until the last day of use. The Sprinter was deregistered by the first owner on 09/07/2026, and after that, it was driven to us without any problems over 700 kilometers on the highway. No error messages or other malfunctions, the car works perfectly. Interior clean. Appearance is quite appealing for its age. Air conditioning is said to be weak according to the driver. 1 boot of the lower right suspension arm is damaged (status GM "minor defect" during TÜV inspection. Otherwise, the inspection report is without defects). This offer is only valid for commercial businesses and freelancers of all kinds and from all industries, as well as for authorities and emergency services of all kinds. Direct sale to private end users is unfortunately not possible. Subject to prior sale and errors. The selling price is the final price/amount gross = net. The differential tax rate according to §25a UStG applies. This means that the VAT cannot be deducted separately and is not due additionally.

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Automatic wire feeding Automatic twisting and cutting Multi-wire bale securing system Ideal Applications: Recycling facilities Fodpfx Aaszhpa Toyspl Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. Fsdsxmrwfepfx Aayopl If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: excellent (used), mileage: 15,210 km, first registration: 04/2022, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,950 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, loading space width: 2,460 mm, loading space height: 1,000 mm, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, retarder, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - High beam - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing jaw = Further Information = Technical Information Number of cylinders: 8 Fpedpfov Um Npsx Aayjl Engine capacity: 16,353 cc Unladen weight: 23,160 kg Transmission Gearbox: OPTICRUISE GEARBOX, automatic Axle Configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steered Functionality Lifting capacity: 9,270 kg Lifting height: 3,180 cm Crane: HMF 020-K6 + JIB FJ1000-K5, mounted behind cab Body brand: HYVA 2Z Tipper: Rear Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SCANIA R530 V8 NGS 8X4 TRIDEM WITH HYVA 2Z TIPPER + HMF 5020-K6 CRANE + JIB FJ1000-K5 EURO 6 L PACKAGE V8 530 HP DRIVELINE 8X4 LAST AXLE STEERED AND LIFTABLE 10 TON FRONT AXLE DIFFERENTIAL LOCK WHEELBASE 395 CM AIR SUSPENDED CR20L SLEEPER CAB WITH CLIMATE CONTROL, NAVIGATION, FRIDGE, LEATHER, CAMERA AUTOMATIC TRANSMISSION RETARDER TRAILER COUPLING ADJUSTABLE UNDERRUN PROTECTION HYVA 2Z TIPPER WITH FRENCH DOORS DIMENSIONS: 600 CM X 246 CM X 100 CM HOOK EYES HMF 5020-K6 CRANE + JIB FJ1000-K5 TOTAL 11X HYDRAULIC EXTENSIONS REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS MAXIMUM LIFTING CAPACITY 9,270 KG MAX LIFTING CAPACITY AT 2,850 CM 575 KG MAX WORKING HEIGHT 3,180 CM CRANE CAN WORK OVER THE CAB. SEE LOAD CHART IN PHOTOS 4X OUTRIGGERS VEHICLE IS FULLY CONSTRUCTED FROM STAINLESS STEEL!!! FIRST REGISTRATION 22-04-2022 WITH ONLY 15,210 KM!!!!! FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY WE HAVE FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, mileage: 222,675 km, power: 390 kW (530.25 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, - Brake system For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. number). Mercedes-Benz Actros 1853 (2153) LS 4x2 semi-trailer tractor Fsdpfxszlbame Aayopl !!! 2-circuit tilting hydraulic system !!!, A0A Two-way sensors, on the rear axle, A0B Axle, wheel mounting track, narrow, A1D Front axle 8.0 t, A1Y Front axle, straight design, A2E Rear axle, crown wheel 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unthrottled, A5C Axle ratio i = 2.733, B1B Electronic brake system with ABS and ASR, B1F Heater, electronic compressed air supply unit, B1H Elect. compressed air supply and control, medium, B2A Disc brake, on front and rear axle, B2X Parking brake, electronic, B3K Secondary oil retarder, B4L Compressed air tank, aluminum, complete, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C8Z Side trim, aerodynamic, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in the cab, D1C Driver's air suspension seat, comfort, D1N Co-driver's functional seat, D3B Comfort bed, lower, D3M Mattress, PremiumComfort, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4T Curtain, transverse in front of the bed(s), D4Z Sun visor, side, driver and co-driver side, D6C Electric auxiliary air conditioning system, D6G Automatic climate control, D6I Waste heat recovery system, D6M Hot water auxiliary heater, cab, D7A Additional thermal insulation, D7J Drawers, under bed, D7R Storage flaps, above windshield, D8N Lifting roof, electric, D9A Pre-installation comfort bed, upper, wide, E6Z Reverse warning system, E7F Cable remote control for air suspension, E9G Pre-installation for electrical equipment, E9I Pre-installation switch, lift axle, semi-trailer/trailer, F0F Side module, N3 vehicle, F0J L-cab BigSpace, 2.50 m, tunnel 120 mm, F3C Cab mounting, comfort, air-sprung, F5L Exterior sun visor, transparent, F5P Air deflector, lockable, EKK/adjustable range extended, F6C Windshield tinted, F6I Front mirror, heated, F6L Main mirror, with maneuvering position, co-driver side, F6Q Air horn, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0K Driving program economy/power, G0T Predictive Powertrain Control, G2E Transmission G 281-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle height +600 mm, I2H Tires tubeless, 315/80 R 22.5 rear axle, I2P Tires tubeless, 385/65 R 22.5 front axle/front lift axle/non-lift axle, I4A Wheel formula 4x2, I6I Vehicle production plant Wörth, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2G Digital radio, J2J Sound system, J2U Navigation system, J2Y CB radio, 24 V, J3U Requirement Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6B Multimedia cockpit, J6Y Remote Online, J6Z Pre-installation Mercedes-Benz Truck App Portal, J8Y Pre-installation for Truck Data Center 7, J9D Pre-installation for toll collection, K0T Main tank, left, K1R Tank 720l+75l AdBlue, left, 650x700x2170 Alu, access, K5M Tanks, lockable, K5S Protective cap for AdBlue dosing system, K8D Exhaust system, tailpipe to the right outside, horizontal, L0A Lighting regulation, according to UN-R 48.06, L1B Daytime running light, L1D Automatic high/low beam and turning light, L1H Fog lights, halogen, L2H Side marker lights, flashing, L3F 1 LED work light below, center, L9A Pre-installation for rotating beacons, L9G Pre-installation, wor

Condition: used, This listing is for Maplelab Scientific Block Heater The unit is in full working condition and ready for immediate use The Maplelab Scientific block heater is a laboratory dry-block heating unit designed for controlled heating of samples in laboratory tubes and vessels. The BH-603 model is suitable for applications requiring consistent sample heating at controlled temperatures Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Fedpfjztpyqjx Aayspl Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 Fpsdpfx Aajyx I Rzeyel 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations heating systems 📦 Included: Exactly what is shown in the photos

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: Fpjdpfxszzn Hlo Aayjl CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: used, 🔥 For Sale: Fröling S3 15–31 kW Wood Gasification Boiler – Efficient and Affordable Wood Heating 🔥 Fjdpfjv Uw Ehsx Aayspl The Fröling S3 is a well-balanced, high-efficiency wood gasification boiler with an output range of 15–31 kW – ideal for residential homes, smaller facilities, and agricultural buildings. It offers clean combustion, long burn times, and easy operation – all at an attractive price point. —— Main features: 🌳 Fuel: Split logs / Hardwood ⚡ Output: 15–31 kW 🧠 Wood gasification with optimized air management 🔧 Manual loading, spacious filling chamber 🇦🇹 Fröling – Austrian design focused on sustainability 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) —— 💼 Top Heating Systems – ProfiKazán Intelligent wood gasification systems for residential and commercial use. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Auger conveyors • Discharge units • Burners • Pumps • Comprehensive range of heating accessories ⚙️ Accessories and components: We also stock a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – suitable for residential to industrial applications. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional units that are not yet listed. 📅 Viewing: A visit to our warehouse is possible by appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Fpedpfx Aajzxcmusyel Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work areas: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair. The plate on the lower bed is missing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Fpedpszrf Sasfx Aaysl Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation Fpsdpfx Aovytfujaysl The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: good (used), mileage: 389,011 km, power: 310 kW (421.48 HP), first registration: 05/2018, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, trailer coupling, - Aluminum fuel tank - Brake booster - EPS - Low noise - Particle filter - Radio/CD player - Sunroof - Side door - Toolbox Suspension: Leaf suspension Front axle: Steered Unladen weight: 12,271 kg APK (Technical Inspection): valid until 05/2027 Technical condition: good Optical condition: good Reference number: 47 Fodpfszz A H Tsx Aayjpl Vehicle number: 47 Mercedes-Benz Arocs 2642 / 6x4 / 3-sided tipper Meiller / Euro6 .: WDB96421410263778 German vehicle TÜV: 05/2027 - Inspection date: 11/2026 Transmission: Automatic Suspension: Leaf / Leaf Air conditioning Engine brake Cruise control Emission standard EURO 6 Trailer coupling Tipper Body: Meiller Year of construction: 2018 Special equipment: Front axle load 9.0 t, Trailer brake 2 - line, Audio system: CD radio Comfort (Bluetooth), Step with handrail on the roof, Exterior mirror right with maneuvering position, Batteries arranged one above the other, CB radio, Air horns (2) on cab roof, Suspension: Front springs 10.5 t, 3 leaves, Rear axle bevel gear 390, Hydraulic pump (Meiller pump - 7 pistons - 275), Interior filter construction vehicles, Fuel tank: 390 L steel, left, Air intake behind cab, Parameterizable special module, Rear cross member reinforced, Seats in cab: Driver's seat suspension seat Comfort, Sun visor outside, Sun protection roller side window, Driver's door, Steel rims 9.00x22.5, Storage flap outside left, 12V socket in the passenger footwell, 24V socket in the passenger footwell in addition, Door extension for cab, Underrun protection rear foldable, Auxiliary heater (water), Twin-plate clutch Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors elect. adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, Standard, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Leaf, Suspension: Rear springs 2x10 t, hard, Window lift electric, Windshield tinted, Generator 100 A, Gearbox 12-speed - Type: G 281-12, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Info display 10.4 cm, Interior filter: Pollen filter, Body/Superstructure: Tipper, Steering assist pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 12.8 L - 310 kW R6 Diesel (OM 471), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in cab: Passenger swivel seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Preparation toll collection, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler gearbox No liability for printing & typographical errors, changes, prior sale and errors reserved! No liability for printing & typographical errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: ...

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Fpodpfx Aaszkanyeyol Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Fodpozkaflsfx Aayspl Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t