Used Oil Heater for sale (10,630)

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, Njdpfx Aajdtm Ndeceku compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: new, Year of construction: 2026, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Mass of the filling opening (L x W) 300 x 340 mm Weight: 375 kg Efficiency 88,2 Energy efficiency class: A+ Nsdpfxshvibzj Aacsku EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance)

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 17.8 kW For rooms up to approx. 300 - 400 m³ (according to DIN 4108) Nodpfx Asdlmnnoacsku Filling volume: 78 ltr Mass of the filling opening: Ø 215 mm Flue outlet: rear side (standard) Flue pipe Ø 180 mm Required chimney draught min. 13 Pa Weight: 250 kg Efficiency: 79,02 Energy efficiency class: A The room heaters GRA-N are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 16.5 kW For rooms up to approx. 300 to 400 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 ltr Required chimney draught min. 12 Pa Dimensions of the filling opening (L x W) 300 x 340 mm Nsdpfx Aedlmn Hsacsku Weight: 370 kg Efficiency 85,88 Energy efficiency class: A+ The EWI-A 15 space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: used, Year of construction: 2001, operating hours: 962 h, machine/vehicle number: LC535, Technical Specifications & Performance DataThis used olive oil processing plant is based on the Oliomio D 350 model, designed for a processing capacity of approx. 350 kg/h. It represents a robust, second-hand solution for producers seeking reliable cold-extraction performance for premium edible oils.Model: Oliomio D 350Manufacturer: Toscana Enologica Mori Rated capacity: Approx. 350 kg/h (olive processing)Hours of operation: 962 hoursYear of manufacture: 2001Product handled: High-quality olive oil extractionConstruction: Hygienic stainless-steel contact parts for food-grade operationProduction Line ComponentsThe system is a complete extraction line composed of the following integrated modules:Washing & Defoliating Unit: Includes an integrated screw conveyor (coclea) for olive transport.Crushing & Malaxing: Hammer crusher (frangitore a martelli) equipped with a malaxer (gramola).Centrifugal Extraction: Decanter equipped with a screw conveyor for pomace (sansa) elevation and expulsion.Oil Collection: Dedicated container for collecting oil at the decanter outlet.Filtration: Cellulose filter, model Jolly 10 (Manufactured in 2008, Serial No. 000004).Automation & Control SystemsThe plant features original controls designed to manage the extraction process and monitor operation metrics.Control Panel: Integrated operator interface with emergency stop (E-stop) and safety interlocks.Monitoring: Analog hour meter tracking total processing time (currently showing 962.79 hours).Electrical: Standard industrial connection (Typical 24V-50Hz control circuits).Safety: Fully CE compliant with visible safety guards and emergency disconnects.Machine Condition & Maintenance HistoryCurrent status: READY FOR OPERATION.Condition: The system presents in good condition. Installation RequirementsThe modular footprint of the Oliomio D 350 allows for flexible installation in professional oil mills.Power: Industrial 3-phase supply required for main motors.Water: Process connection required for the washing and defoliating modules.Environmental: Level, cleanable floor with drainage for sanitary operations.Safety Standards & Compliance CertificationBuilt with operator safety and food hygiene as priorities, the line incorporates mechanical guarding, interlocked doors, and emergency stops at strategic positions. Sanitary design principles facilitate effective cleaning and help support HACCP programs.Guards and interlocks: Fixed and hinged guards with safety switches on moving partsElectrical safety: E-stops, ... Nsdpfx Ajyhch Eoacoku

Condition: used, Year of construction: 2000, machine/vehicle number: LC590, Technical Specifications & Performance Data This second hand complete oil production line is engineered for continuous olive oil extraction with industrial reliability and efficiency. Designed and manufactured by Pieralisi, the JUMBO 3 configuration delivers consistent throughput for food-grade processing and can be integrated downstream with bottling equipment for industrial packaging operations. Manufacturer: Pieralisi Model: JUMBO 3 Production capacity: 3 tons per hour Application: Edible oil extraction and clarification Line composition: Leaf remover, washer, crusher, malaxers (7 units total), decanter, separator, conveyors Year of manufacture: 2000 Configuration: Complete process line, suitable for integration with a used bottling line for final packaging Advanced Automation & Control Systems The Pieralisi JUMBO 3 platform is known for robust process control across extraction stages. The line supports synchronized operation from fruit preparation through separation, ensuring stable throughput and repeatable quality. Quick adjustments on the malaxers and decanter support optimization for different olive batches and temperatures. Process-stage synchronization for steady 3 t/h throughput Adjustable malaxing parameters for yield and quality optimization Consistent separation and clarification via decanter and final separator Operator-friendly controls supporting safe and reliable operation Production Line Integration Capabilities Engineered as a complete process solution, this second hand line interfaces easily with upstream fruit intake and downstream industrial packaging or bottling equipment. Conveyors enable smooth material handling between stages, while modular elements facilitate format and process adjustments. Nkodpsyhb Auofx Aacou Inline integration with depitting, storage, and bottling/packaging lines Conveyor-based transfers between preparation, malaxing, and separation Flexible setup for edible oil production workflows Machine Condition & Maintenance History The complete line has been dismantled and stored. Components are complete as listed, ready for inspection and recommissioning at the new site. Operational status: dismantled and in storage Complete core components included as listed Operational Performance & Versatility With a 3 tons per hour capacity, the line delivers stable performance across critical stages of oil extraction. The seven malaxers provide thermal and residence-time flexibility to balance yield and flavor profile. The decanter and final separator ensure efficient solids-liquid separation and product clarity suitable for edible oil standards. High-throughput crusher feeding multiple malaxers Seven malaxers: 2 double and 3 single units (7 malaxing sections total) Decanter centrifuge for primary separation Final separator for polishing and clarity Installation Requirements & Site Preparation Recommissioning requires appropriate floor space for the process modules and conveyors, utility hookups, and material flow planning from fruit reception to clarified oil storage an...

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW Njdpfx Aaeyhbzdocsku The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: used, Year of construction: 2008, machine/vehicle number: M301, Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview This second-hand CFT–COMACO RVAR 6/10 + TA/3 is a volumetric piston filling and press-on capping monoblock engineered for edible oil. Built in 2008 and currently in production, it is a proven asset for industrial packaging environments looking to expand or upgrade a used bottling line. We can sell it as-is (see and like) or with revamping and preventive maintenance operations to prepare the monoblock for production. Revamping & Preventive Maintenance Activities If required, the following revamping activities can be carried out to ensure reliability and readiness for production: Assembly of machine parts at KBB workshop General machine cleaning General lubrication (greasing, oil level check and possible replacement) Inspection of rubber parts (belts and gaskets) with replacement if necessary Machine start-up: check of circuit integrity and correct functioning in manual/automatic modes Verification of format change equipment availability and integrity Technical Specifications & Performance Data Filler – CFT/COMACO RVAR 6/10 (volumetric) Product: Edible oil (filling temperature 10–30 °C) Filling system: 6 volumetric dosing groups (cylinders & pistons, plug valves), out-of-neck filling; max dose 10,500 cc Nozzles: 6 + 6 + 6 patented nozzles dedicated to edible oils Accuracy: 1σ = 0.6 g Mechanical data: filler pitch 377 mm; pitch circle diameter 720 mm; max container diagonal 220 mm; max height 460 mm Construction: painted steel base fully clad in AISI 304 stainless steel; AISI 304 product hopper with convex bottom and float level control Capper – TA/3 (press-on) Nodpfx Aoyhbtgjacjku 3 capping heads with PP320 press-on heads and positive pick (vacuum-assisted) Rated capacity: up to 6000 cph for PET press-on caps Pitch circle diameter 360 mm; machine pitch 377 mm Pick & place cap transfer; hardened steel cam for head pistons Automatic electric turret height adjustment; centralized lubrication shared with filler Two cap elevators, each with 300 L covered hopper, cleated belts, and low-level control; mobile stainless steel frames on wheels Formats, closures and indicative speeds PET: 1 L (Ø20), 2 L (Ø28), 3 L (Ø40), 5 L (Ø40), 10 L (Ø40) Tinplate: 1 L (Ø32), 3 L (Ø32), 3 L/Gallon/5 L (Ø32) Press-on caps: 31/17 (1 L PET), 38/24 (2 L PET), 51/24 (3–5–10 L PET); flex-spout common to all tinplate formats Approx. filler outputs: up to 3500 bph (1 L PET Ø20), 3000 bph (2 L PET Ø28), 2500 bph (3 L tinplate Ø32), 2500 bph (5 L PET Ø40), 2200 bph (5 L tinplate Ø32), 1100 bph (10 L PET Ø40) Advanced Automation & Control Systems Siemens PLC: SIEMENS S7 E300 with operator controls for automatic and manual modes; inverter-driven main motion with increased power to drive the capper via gears Automatic turret height adjustment (filler and capper) Micrometric volume adjustment via cam reducer; adjustable even during machine motion Volume compensation versus product temperature (automatic correction for ±2 °C delta) Per-doser volume fine correction NO CAN–NO FILL device prevents valve opening without a container

Condition: used, mileage: 24,152 km, power: 118 kW (160.44 HP), color: red, gearing type: mechanical, Year of construction: 1990, Iveco-Magirus 75-16 AW 4x4 LF8 Firefighting Vehicle Auxiliary heater, differential lock, gearbox reduction, manual transmission, 9 seats, trailer coupling: 40mm Rockinger, additional rear spotlights, engine brake, air horns, revolving beacons, fog lights, headlights: halogen, front-mounted pump, front flashers, permissible gross weight: 7,490 kg, unladen weight: 5,580 kg, payload: 1,910 kg, tire tread depth: 1st axle 15-16mm, 2nd axle 16-17mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. For more information, please visit our homepage. Errors, changes, and prior sale excepted! Auxiliary heater Cab: Double cab = More information = Nsdjyfvd Iopfx Aaceku Cab: double Intended use: Goods transport Engine capacity: 6,086 cc Gross vehicle weight: 7,490 kg Last inspection: 07/2024 Please contact Tobias Ebert for further information.

Condition: used, mileage: 24,152 km, power: 118 kW (160.44 HP), axle configuration: 4x4, color: red, gearing type: mechanical, Year of construction: 1990, Iveco Magirus 90-16 AW LF8 Firefighting Vehicle - 9 seats - Pump: FP 8/8 - Auxiliary heater - Manual gearbox - Differential lock - Transmission reduction - Trailer coupling: 40mm Rockinger - Additional rear work lights - Engine brake - Air horns - Rotating beacons - Headlights: halogen - Fog lights - Front-mounted pump - Front warning strobes - Gross vehicle weight: 8,800 kg - Curb weight: 5,580 kg Nkedpfeyfu Skjx Aacou - Payload: 3,220 kg - Tyre tread depth: 1st axle 15-16 mm, 2nd axle 16-17 mm Leasing or financing offers available upon request. Mr. Seidel (phone) will be happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale! Cab: Double cab = More information = Cab type: double Engine displacement: 6,086 cc GVW: 8,800 kg External dimensions: 0x2500x3000 Last inspection: 07/2024 Please contact Tobias Ebert for more details.

Condition: ready for operation (used), Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2014 Nkjdpfx Aoyku E Uoacou Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: good (used), immersion heater -Power: max. 2000 W -Step switch: 12 positions Nodpfeb A Iavjx Aacoku -Body: made of aluminum -Connection: 230 V -Weight: 5 kg

Condition: like new (used), Year of construction: 2024, Oil hermetical distribution transformer - producer Elpro Energo, 1600kVA; 22/0,4kV, Dyn1, year of production 2024, functional, rutine test report, technical documentation. Nkjdpfx Aaeyl Ngiocsu

Condition: good (used), Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: Propane Nksdpfx Ajb A Shxoacsu -Quantity: 1 available Price: per piece -Weight: 16 kg

Condition: good (used), Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available Nkodpeiz Udwjfx Aacou -Dimensions: 710/390/H445 mm -Weight: 38 kg

Condition: used, Year of construction: 2002, Air compressor (oil-free) CompAir R 180 Model R 180 TS-Z11 Nkedpeu Rphqjfx Aacju Year of construction: 2002 Weight: 3860 kg Volume flow: 17.0 m³ / min Intake pressure: 1 bar Stage pressures: 2.4 / 12 bar Installed motor power: 110 kW The compressor was regularly serviced and inspected until it was decommissioned.

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Mains frequency: 50 Hz Nkodpfsu Rnzisx Aacou The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: not inspected (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this reconditioned Schwank supraSchwank 15 / 2 gas heating system, year of manufacture 2015. Nedpfjygbbzex Aacoku

Condition: good (used), Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece Nedpjctla Hjfx Aacsku -Dimensions: 460/500/H950 mm -Weight: 32 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator Njdpfxjq Ei Dbo Aacjku -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Year of construction: 2013, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: Model #2WN137F1-H23Z-BJMVA-21/50T, Crosshead piston compressor for small-molecule gases such as hydrogen or argon. Oil-free! Installed as a backup unit but never put into production, so it is in like-new condition. Current new price: €190,000. Nedpfx Aajv Uyqmeceku Inlet pressure: 5 psi = 34.5 kPa (0.345 bar gauge) Outlet pressure: 60 psi = 413 kPa (4.13 bar gauge) Flow rate: 148 scfm = 240 m³N/h Power requirement: 30 kW

Year of construction: 2008, condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Nodpfx Aaelcd Szscjku Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Nodpfxob A Ib Hj Aacoku Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Condition: good (used), Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle -Compressed air connection Nkedpfx Aasb A Igvocju

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg Nksdpfxob A Iy Hs Aacsu