Used Oil Mist Collector for sale (7,306)

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: Fodpfx Aj Adrtxsanjpp * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: Fpsdpfx Ajz Syxaeansp * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. Fpjdpfx Aaed Nwk Usnep MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Fpedpfx Aaez R Rlvensp Several units of this device are available (the price stated is for 1 unit). The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. The liquid collects at the bottom of the filter and can be reused for operation. These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Oil mist and fume extraction unit for CNC machines, Plymovent brand separator filter. Designed for purifying air from metalworking processes involving high-viscosity, contaminated, or burnt oil, including: CNC machines for cutting, drilling, and sharpening; metal forming machines; oil mist generated by heat and surface treatment. Simple to operate and reliable filter design. Filter housing made of galvanized steel sheet coated with powder paint. The filter is equipped with a pressure gauge indicating the filling level of the filter element. Fedpfx As Ad Dnbsanspp Fan in a sound-absorbing housing, 4 kW (three-phase) POWER: FA-6000 Capacity up to 6000 m3/h Inlet diameter - 250 mm Dimensions: Filtration unit: 0.85m x 0.70m x h-2.41m Fan: 1.20m x 1.10m x h-1.30m Stock number: 0027

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Fpedpfx Aaey R Aldjnop Filtration area: Main filter – 21 m² HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Fodpfx Aaexnlwzonspp Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Fedsxri T Uspfx Aanepp Shipping by freight forwarding possible, please inquire with postal code

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Fodpfxoxxh Tae Aanepp Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Fedpfx Aezva Tmsanopp Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Year of construction: 2018, condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A - protection class: IP54 Fpsdjg Ipn Tjpfx Aanjp - noise: 70 dB

Condition: used, Year of construction: 1992, Made in Germany Electrostatic filter Suction capacity: max 2200 m³/h Weight: 150 kg Operating voltage: 400 VAC, 50 Hz, Current consumption: 3.2 A Fpsdpfx Aaev D Drmjnop

Condition: used, machine/vehicle number: WW12699, Product information "Oil mist filter Filtermist FX5002" Oil mist filter Filtermist Type/Model: FX5002 Fsdezm Itvopfx Aanopp Condition: Used Technical data Air flow rate: 1675 m³/h (at 50 Hz) Motor: 1.5 kW / 400 V Dimensions (L x W x H): approx. 600 mm x 420 mm x 780 mm Weight: approx. 39 kg Inquiry item! Shipping costs will be provided in a separate quote.

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB Fpsdpfstp Thbox Aanjp A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: good (used), Second-hand machine used in a refrigerator Fpjdpfxevutrwj Aanjp

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Fpsdpfet Tyqmsx Aanep Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Fedpfxevrfv As Aanspp Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Condition: good (used), Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 Fedpfx Aasiz Udwonopp -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

Condition: used, Industrial Extraction Fan, SARA UC 2 SD Serie II Industrial Oil Mist and Emulsion Mist Extraction Unit, Used Machine Overall Dimensions Width: 740 mm Fpedpfx Aszgiakjanjp Depth: 550 mm Height: 720 mm Manufacturer / Distributor H. Sartorius Nachf. GmbH & Co. (Germany) Model SARA UC 2 SD Serie II Technical Specifications Year of Manufacture: 2002 Serial Number: 02-6-338 Power Supply: 3~ 400 V AC / 50 Hz (Three-phase) Rated Current: 1.9 A Power Output: 0.9 kW Motor Speed: 2750 RPM Airflow Capacity: 1000–2000 m³/h

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors Fjdpfx Aewwt Tljanopp - Simple, tool-free filter replacement - Numerous options

Condition: good (used), Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator Fsdpfxoi I Hc Hj Aanopp -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Fpodpfx Aajy H Exfonjp

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Fpjdpfx Asyn Rmioanjp Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW Fpsdpfx Aaeyn Rkuonjp * 4000 m³/h * 84 dBA * 2800 L/min

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements Fpedpfx Aspkwauoanep - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.