Used Okuma Lu 15 M for sale (230)

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 Bwedex D S Ekepfx Al Ijl • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Bjdpfjyfht Uex Al Iowl Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Control system OKUMA OSP P200L • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 stations • Number of revolvers 2 • Tool holder BMT 60 • Number of tools 24 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Y-axis travel mm • X-axis travel 200 mm • Z-axis travel 1000 mm • Hydraulic clamping Y-axis • Sub-spindle with W-axis • Spindle configuration twin spindle • Main spindle bore 110 mm • Spindle bore approx. 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 4200 rpm • Main spindle drive VAC 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 360 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mmMachine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight approx. 6100 kg • Maintenance contract yes • Utilization 60% Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Bsdpfjy Ddtvsx Al Iswl Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions Bodpey Ddiwjfx Al Iowl • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) Bwodpfjy Dc Nijx Al Iol • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: excellent (used), OSP P200M Control Working travels 1000 x 1000 x 900 mm Bodpfxsy Hqv Nj Al Ijwl Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 2010, operating hours: 32,760 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, total height: 3,300 mm, total width: 5,800 mm, table load: 1,500 kg, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, tool weight: 8,000 g, product length (max.): 3,000 mm, number of axes: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details. • Maintenance contract: yes • Condition: About 1.5 years ago, electrical maintenance was carried out; electrical components were partially replaced or cleaned (Guides, linear axes, geometry) • Utilization: 70% • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) • Spindle speeds: 8000 / 12000 / 15000 rpm • Magazine capacity: 20 standard (optional 32 or 48) • Number of revolvers/magazines: 1 • Max tool length: 300 mm • Max tool diameter: 125 mm • Rated voltage: 400 V • Number of phases: 3 • Frequency: 50 Hz • Max. power consumption: 42.6 kVA • Total current consumption: 61.5 A • Max. motor current: 112 A • Short-circuit withstand capacity: 15 kA • Voltage: 200 VAC, 50 Hz, 3~ Bwodsy Ama Nspfx Al Iol • Control voltage: 24 VDC • Power: 9 kW • Weight: 50 kg Additional equipment • Optional: Zero-point clamping plate for table 1530 x 660 mm for an additional charge • Optional: Approx. 530 tools available for an additional charge Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Bsdpfsylkgqox Al Iowl Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Bodpjyk Tbhofx Al Ijwl Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: OKUMA, controller model: OSP E-100M, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control Bedpfsx D Nlzox Al Iowl • Mop tool control Extra Information Machine still under power

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Bsdeyt Nvtepfx Al Iowl Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Bwedpfx Aeyxmyuol Ijl Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. - OSP P200M Bwodpfx Asyg Rb Rel Isl - Year of manufacture: 2008 - Cutting time: 17,500 h - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Bwjdpfjyq Sl Eex Al Ijl Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Bedpfxoymfmnj Al Iowl

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year 2008 Bodpoyg Rf Nsfx Al Iewl - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, workpiece length (max.): 300 mm, total height: 2,850 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 560 mm, table height: 800 mm, table length: 1,300 mm, overall weight: 8,000 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 15,000 rpm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MB56 VA Bwodpfsyq R I Sox Al Iel OSP P200M, ATC for 32 tools SK40, chip conveyor, bag filter for internal cooling, 15,000 rpm. Feel free to request our all-inclusive package: loading, transport, installation, commissioning, and service.

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 5,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS 2x Pallets 500 x 500 mm Travel distances X: 700 mm, Y: 800 mm, Z: 700 mm Table size: 500 mm x 500 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Table load capacity: 800 kg Bsdsyrgzkspfx Al Iewl Spindle speed: 5,000 rpm Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Maximum tool length: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Machine weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Spindle hours: 18,500 EQUIPMENT Chip conveyor, coolant system, and pocket filter system for internal cooling

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Bwsdevta Rkepfx Al Iel Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. A very compact and efficient machine for bar stock workpieces. * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician. Bsdpfx Aleyq S E Se Ijwl

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Bsdpfx Alovta Sbe Iowl Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center Bwjdpfxjyiu Dbo Al Iel - Okuma OSP P200L - Year of manufacture: 2008 - Cutting time: 13,900 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm - Sub spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: good (used), Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB56VA 3-axis vertical machining center U100M ATC 32 SK40 Main spindle 12,000 rpm Oil mist extraction Cutting time 9,675 h Chip conveyor Bwsdpsyiu D Iofx Al Isl Coolant system Preparation for A-axis (4th axis) *Optional: large selection of SK40 tools to suit the machine

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm Bwsdpfx Asxrwpdel Ijl total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Bwsdpfxey Atu To Al Isl