Used Okuma Multus B 400 for sale (217)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) Bjdpfx Ajy Nmi Dofkswn • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 560 mm Bwsdoy Nb T Djpfx Afkon

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. Bodpfx Afjy Nb Nxokown • Table size: 1000 × 460 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. Bjdpfey I Uu Esx Afkown • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Bsdpfxsh D Anae Afkjwn +++++

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 Bwodpfx Afsy R A N Aoken No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Bsdpfx Afeyglhfekswn Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: ready for operation (used), Year of construction: 2011, operating hours: 18,533 h, functionality: fully functional, machine/vehicle number: PA158, turning length: 450 mm, turning diameter: 300 mm, workpiece weight (max.): 9 kg, workpiece length (max.): 150 mm, workpiece diameter (max.): 225 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 450 mm Turning diameter: 300 mm Workpiece diameter max.: 225 mm Workpiece length max.: 150 mm Workpiece weight max.: 9 kg MACHINE DETAILS Operating hours: 18,533 h Bsdpsy R Uy Hofx Afkewn Rated voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Maximum power consumption: 22.9 kVA Total current consumption: 34.8 A Motor current consumption max.: 72 A Short-circuit power data / current interruption at: 15 kA Dimensions & Weight Space requirement (L x W x H): approx. 2,550 x 2,150 x 2,100 mm Machine weight: approx. 4,900 kg Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1938, turning length: 850 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, workpiece length (max.): 850 mm, workpiece diameter (max.): 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 850 mm Turning diameter: 340 mm Spindle speed max.: 4,500 rpm Workpiece diameter max.: 300 mm Workpiece length max.: 850 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 MACHINE DETAILS Control system: Okuma OSP 7000L Power max.: 22 kW Bsdpfjy R Uxiox Afkewn Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption max.: 30.1 kVA Total current consumption: 43.4 A Motor current consumption max.: 106 A Current interruption at: 10 kA Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Bwsdszat Tvopfx Afken Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 01224, turning diameter over cross slide: 520 mm, turning length: 750 mm, turning diameter: 380 mm, spindle bore: 60 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 20 rpm, overall weight: 5,000 kg, bar diameter (max.): 60 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC control Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm Bwedpfx Aoy Irfzofkjn Turret: 12 stations Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Including various toolholders Monitor new: flat screen Year of manufacture: 1987 Machine under power. Data sheet, documentation and manuals available Data transfer possible with laptop.

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations. Bsdpfjx D S Ekjx Afkswn

Condition: excellent (used), OKUMA control system Turning diameter: 650 mm Turning length: 1450 mm Bedpfjyxrggsx Afkown For technical specifications, see the photo. The price of the machine includes the accessories shown in the photo.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Bwodpfx Ajy Ed Aysfken Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash Bwedpfsy Dc Niex Afkon • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. Bwedpfxey A I Sts Afksn • Max swing over covers: 450 mm • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations • Spindle Bore: 90 mm • Supply Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA • Full Load Current: 76.7 A • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Bwedpfx Ajy A Ibhsfksn Driven Tools Yes Taper Size VDI 50

Condition: excellent (used), Year of construction: 2016, operating hours: 8,800 h, functionality: fully functional, Control unit: OSP-P300M-R Table dimensions: 1300 x 560 mm Table load: max. 900 kg X-axis travel: 1050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 12000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 7500 kgs Bsdpfx Afjy T Nfcekown Dimensions (L x W x H): 3200 x 2500 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - TAS-C - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor Bwsdpjy T I U Aefx Afkon - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle - Tool probe - Parts catcher Bwedow Np Uhjpfx Afkon Spindle speed: 3800 rpm Spindle operating hours: 20,503 h A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures).

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle - Tool probe - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. Bwsdpfx Afew Np S Hskon The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Bwjdpfx Ajyxmyusfken Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Bwedpfxsx Tzyxe Afkjn

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition Bjdpfx Afsy Rx Tdjkswn 521 operating hours 347 spindle hours

Condition: used, Year of construction: 2005, For sale: CNC Machining Center OKUMA ACE CENTER MD-56VA (2005) Condition: Good, fully functional. Manufacturer: OKUMA Corporation (Japan) Model: ACE CENTER MD-56VA Year of manufacture: 2005 Bjdpfx Afsxp Utbjkjwn Reliable vertical CNC machining center designed for precise milling, drilling, and tapping of metal components. OKUMA is one of the most renowned Japanese manufacturers, known for the precision and durability of its machine tools. Main technical specifications (according to MD-56VA model): Control: OKUMA OSP-E100M Travel: X = 1050 mm / Y = 560 mm / Z = 460 mm Table size: 1300 × 560 mm Max. table load: 800 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15/11 kW (continuous/rated power) Power supply: 400 V / 50 Hz Cooling system: integrated Approx. weight: 7,000 kg Application: The OKUMA MD-56VA CNC machining center is designed for high-precision metal parts production: - Mechanical components - Molds and tools - Machining of aluminum, steel, and non-ferrous metals Ideally suited for precision manufacturing and small to medium series where accuracy and repeatability are crucial. If you have any further questions, please feel free to contact us.