Used Packer for sale (284)

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine OverviewThe ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.Operating mode: AutomaticInfeed layout: Straight infeed (inline)speed: 1500 Paks/hour (PPH) Packaging: Tray wrap with neutral film overwrapFormat range: 0.5 L – 10 LMachine configuration: Delivered without container infeed system (to be provided by the line)Year of manufacture: 2008; Overhauled: 2022Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.Key Technical DataModel: COMBIGIOTTO 90-MBrand: ATLANTAOperating condition: Ready for operationPackage configuration: Wrap + film on trayFilm type: NeutralTray: Available (tray packaging configuration)Machine feed type: Straight (inline)Format capability: 0.5 L to 10 L containersYear: 2008 (overhauled 2022)Automation & ControlIndustrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.Integrated diagnostics, alarm history and counters (shift/lot totals).Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.Electrical protection degree: IP54 for the electrical system and motors.Line IntegrationContainer infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).Inline design simplifies alignment with fillers, labellers and downstream conveying.Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).Condition & MaintenanceOverall status: Ready for operation.Overhaul completed in 2022 to restore full functionality.Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts.Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT... Fpodpfx Apjxdnbzeweg

Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Fsdpfx Apex H Thzewspg Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process. Site Requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth). Auxiliaries: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC. Electrical enclosure protection: IP54; motor protection: IP54. Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...

Condition: used, Year of construction: 2006, Overview  This complete filling line for non-returnable PET bottles was manufactured 2006 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line and dedicated to produce fresh milk. The line is designed for milk production, handling up to 9,000 b/h and is in a good condition. The equipment becomes available as the seller dediced to commit the milk production to an external company and continue only the cheese production in the factory. Technical Information Product: Fresh Milk Container Material: PET Bottle Format: 1,0 L Nominal Speed: 9.000 BPH Neck Finish: 38 mm Label Type: OPP Rollfed Packaging: 16 bottles per crate Pallet Type: Europallet 800 x 1200 Scope of Delivery  Blowing Machine | Krones | Contiform S8 | 2006 Preform Tipper | TM | KPT | 2012 Air Conveyors (~100 m, 9 fans) | Krones | AirCo | 2009 Filling Monoblock (Neck Handling, 32 valves) | Krones | Volumetic | 2006 Capper (8 heads) | Krones | 2006 Ink Bottles Marker | VideoJet | 2006 Labelling Machine | Krones | Contiroll | 2004 Case Packer | CMT | IFL3T | 2004 Palletizer (Fanuc M-410 Robot) | Elettric 80 | 2009 LGV Pallet Transport Shuttle (Optional) | Elettric 80 | 2009 Fpjdpfsym D Ukjx Apwog

Condition: new, Year of construction: 2025, For sale is a Felder K500 P panel saw with an 800 mm cutting width. This is a brand-new machine (originally packaged) with full warranty/guarantee. Technical data: - 2050 mm X-Roll sliding table - 1300 mm outrigger table with 2600 mm crosscut fence - Angle index system - 800 mm cutting width across the entire table width - Rip fence with fine adjustment Fpedjyk T H Dspfx Apweg - Extraction pipe holder for saw blade guard - Additional crosscut stop 1300 mm - 5.5 HP (4 kW) motor, 400 Volt - Machine No. 441.11.031.25 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: used, machine/vehicle number: LC555, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h Fpedpfxswkux Ns Apweg General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities. For instance, companies manufacturing milk, plant-based drinks, or fruit juices can benefit from the line’s ability to maintain sterility without cold chain logistics. In fact, the full integration of Tetra Pak modules allows manufacturers to achieve high energy efficiency, complete batch traceability, and reduced d...

Condition: used, Year of construction: 2006, machine/vehicle number: M302, Used filling monoblock isobaric Filltec 8000 bph – Overview Second hand isobaric filling monoblock Filltec Varifill32/8 (year 2006), complete with AROL crown capper. This pre-owned unit is engineered for beverage production of both carbonated and still products, delivering a nominal speed of 8,000 bottles per hour. With 32 original mechanical filling valves and an 8-head 26 mm aluminum crown capper, it is a robust solution for a used bottling line within modern industrial packaging environments. Rotation direction: clockwise. Ref. no.: M302. Technical Specifications & Performance Data Main data Manufacturer / Model: Filltec Varifill32/8 Technology: Isobaric rotary filler with mechanical valves Year of manufacture: 2006 Condition: In production (second hand / pre-owned) Nominal speed: 8,000 bph Products: Carbonated and still beverages Formats processed: 5 formats Bottle diameter range: 60–80 mm Rotation direction: Clockwise Aseptic execution: No (standard isobaric) PLC: SIEMENS S7 – 300 Filling and capping groups Filler: 32 original mechanical filling valves Cap type: 26 mm aluminum crown cap Included blocks: Filler + capper (no rinser) Electrical specifications Fpjdpfx Ajyhcgnepwsg Main supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth) Auxiliaries: 24 VDC Instrumentation voltages: 24 VAC – 230 VAC Protection rating: IP54 (machine and motors) Advanced Automation & Control Systems The monoblock adopts an industrial control architecture based on 24 VDC auxiliaries and segregated power/instrument circuits for stable operation. IP54-rated enclosures and motors support reliable performance in beverage production environments. Interlocked guards and standard safety circuits facilitate compliant operation within a used bottling line. Process control advantages Isobaric filling for consistent product quality on carbonated beverages Mechanical filling valves designed for repeatable volumetric accuracy AROL capping turret synchronization with filler for secure 26 mm crown cap application Production Line Integration Capabilities This monoblock is ready to be integrated into existing second hand or new industrial packaging systems. Connectivity and interfaces Upstream compatibility: infeed conveyors, independent rinsers or blowers (not included) Downstream compatibility: conveyors to labellers, inspectors, packers and palletizers Format handling: starwheels and guides sized for 60–80 mm bottle diameters across 5 formats Utilities: single 400 V 50 Hz power supply with 24 VDC auxiliaries as per specifications Machine Condition & Maintenance History Operational status: In production Original equipment: 32 mechanical filling valves retained Visual condition consistent with regular operation; detailed maintenance records to be verified during inspection Reference number: M302 Operational Performance & Versatility Throughput: 8,000 bph nominal on suitable formats Product range: carbonated soft drinks, beer, sparkling beve...

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm Fjdpfjy Akdrox Apwepg - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: used, Year of construction: 2006, PET bottling line, 25,000 bph, for sale with the following line components: - PET blow moulder, manufacturer: Krones, type: Contiform, year: 2006 - Rinser-filler-capper block, manufacturer: Krones 60/80/15, year: 2001 - Labelling machine, manufacturer: Krones, type: Contiroll, year: 2001 - Shrink tunnel/shrink packer, manufacturer: Krones - Traypacker, manufacturer: Dimac Fjdpfsyzft Sox Apwjpg - Palletizer, manufacturer: Kettner, type: Pressant The line has been dismantled and is in storage.

Condition: used, Year of construction: 2025, working width: 6 mm, Equipment: lighting, OPTIMER XL6000 / 47M notched disc / 1 set double-U roller OPT.L/XL6000 / 1 set without front tools / 1 set leveling harrow in front of packer OP XL6000 / 1 set front support wheels / 1 Fjdpjyahgqsfx Apwjpg

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER Fpjdpstraaasfx Apwsg • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging Fjdpfsw Ahfyjx Apwspg SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. T...

Condition: used, Year of construction: 2009, operating hours: 32,500 h, machine/vehicle number: LC603, Used Aseptic carton filling line 8000 bricks/h - year 2009Technical Specifications & Performance DataThis second hand carton filling and packaging line is engineered for Gable Top Diamond Curve cartons with screw caps, delivering reliable performance for industrial packaging and beverage production. Manufactured by Shikoku and Elopak engineering, the line centers on a Shikoku carton filler and integrates Elopak cap application systems, a cap feeding bunker, complete conveyors with buffering, and an Oystar A+F tray packer for end-of-line operations.Main filler: Shikoku S-PS90HA (Year 2009)Container type: Carton (Gable Top Diamond Curve with screw cap)Compatible formats: 0.5L, 0.75L, 1.0LCap application: 3 × Elopak E-PLA-S30 cap applicators (Year 2009)Cap feeding: Elopak CSFS cap feeding bunker (Year 2009, Serial No. 28119)End-of-line: Oystar A+F Traypacker TF (Year 2011), tray configurations 4×3, 4×2, 2×3Electrical (line standard): 400 V, 50 Hz, 3-phaseFiller electrical/air: 400 V, 50 Hz, 3-phase; Current 177 A; Air 582/533 kPa; Air consumption 1350 NL/minElopak E-PLA-S30 (per unit): 400 V, 50 Hz; Current full load 26 A; Max unit current 40 A; Air pressure 700 kPa; Air consumption 3 NL/min; Weight max 1000 kgElopak CSFS bunker: 400 V, 50 Hz, 3-phase; Current full load 3.6 A; Air pressure 415 kPa; Air consumption 50 NL/minConveyors: Complete conveyor system with integrated buffering sectionDocumentation: Instruction manuals and spare parts documentation includedAdvanced Automation & Control SystemsThe line includes centralized electrical control cabinets and interconnecting cabling to coordinate filler, cap applicators, bunker, conveyors, and tray packer. Clear wiring diagram references on Elopak equipment support maintenance and troubleshooting. Format changeovers between 0.5L, 0.75L, and 1.0L are supported, enabling rapid adjustments for production planning. Pneumatic subsystems are specified with measurable air pressure and consumption, allowing accurate utility sizing and stable automated performance.Centralized electrical control cabinets and cablingDefined wiring diagram references on Elopak modulesPneumatic controls with documented pressure/consumptionFormat adjustment capability for multiple carton sizesIntegrated safety sensors and interlocks on modulesProduction Line Integration CapabilitiesThis used bottling line for gable top cartons is designed as an integrated production cell, from filling and capping to tray packing. The complete conveyor system with buffering ensures balanced throughput between stations and minimizes stoppages. The Oystar A+F Traypacker TF accepts multiple tray patterns, enabling flexible downstream logistics. The modular architecture also allows standalone testing of individual units when required, supporting maintenance and phased commissioning.Inline integration from filling to tray packingConveyors with buff... Fpsdpfjyk E S Sox Apweg

Condition: like new (used), For sale is a used Record Power band saw BS 300 E with a cutting width of 305 mm. The saw is in nearly new condition and has been reconditioned and inspected by our professional staff. (Fully functional) Technical data: - Cutting height: 190 mm - Cutting width: 305 mm Fsdjyx Dalspfx Apwspg - Saw blade length: 2370 mm - Blade width: 8-15 mm - Table tiltable 90-45° - Includes base with wheels The band saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: band saw, saws, saw, band Reference: R-AT0EF

Condition: like new (used), Year of construction: 2021, DEMO MACHINE Fodpeyx Anuofx Apwopg For sale is an as-new Wesetslintner long belt sanding machine with a 6800 mm belt length. The demo machine is in original condition, so you receive the full warranty. Technical data: - Table size: 2500 x 900 mm - Belt length: 6800 mm - Belt width: 150 mm - Electrically adjustable table height - Lighting - Motor power: 2.9 kW / 4 HP - Year of manufacture: 2021 The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: long belt, sanding machine, surface finishing Reference: R-D1618

Condition: used, Year of construction: 2006, operating hours: 43,950 h, machine/vehicle number: LC614, Used KRONES PET complete line for ESL 12000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET ESL applications with UV cap treatment and is aseptic-ready. Engineered around Krones equipment, it delivers consistent performance for 0.5L and 1.0L formats. The line is suitable for industrial packaging and beverage production, especially for sensitive products requiring extended shelf life.Line type: PET ESL with UV cap treatment; aseptic-ready configurationMaximum line speed: 12000 bph (based on 1.0L)Formats: Compatible with 0.5L and 1.0L bottle formatsNeck formats: 38mmContainers: Designed for PET bottle handlingBlow molder: Krones Contiform S8, 8 cavitiesFiller: Krones VODM-PET counterpressure volumetric filler, 32 headsLabeling: Krones rotary labeler with 10 plates (10000 bph) and Krones rotary labeler with 8 plates (8000 bph)End-of-line: Case packer and Fanuc robot palletizer for EuropalletsOperating hours: Approximately 43950 hoursManufacturing year (main equipment): 2006Model references: Contiform S8, VODM-PETAdvanced Automation & Control SystemsThe line integrates modern automation with centralized HMI for recipe management, production counters, and real-time performance monitoring. Automatic valve and pump control supports consistent filling conditions and stable operation at target throughput.Automated production functions with HMI-based controlPerformance setpoint management and production counter visualizationUV cap treatment system integrated for ESL complianceDesigned for hygienic operation and stable fillingQuick recipe selection for 0.5L and 1.0L formatsProduction Line Integration CapabilitiesThis second hand complete bottling line is configured for inline operation from PET preform blowing through filling, labeling, case packing, and robotic palletizing. Conveyors and accumulation ensure smooth product flow with minimal stops.Inline configuration from blow molding to palletizingDual rotary labeling machines to optimize throughput across formatsFanuc robotic palletizer for Europallet patternsFormat changeover between 0.5L and 1.0L with dedicated change partsSuitable for beverage production workflows requiring ESL conditionsMachine Condition & Maintenance HistoryThe line remained in production until December 2025. It is still connected to the electrical network and can be demonstrated running. Overall hours are approximately 43950, reflecting a well-utilized but maintained system typical for industrial packaging environments. No refurbishments are declared, and the equipment has remained in service through recent operations.Operational until December 2025Connected and can be seen runningApprox. 43950 operating hoursCommercially maintained in a productio... Fodpfx Apoywk Srowopg

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Fpedpfjyb R Uaex Apwjg

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series Fpedpfeyb Tucex Apwsg

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Fpsdpfxjwq Sfgj Apweg

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Fodpfsr It Stjx Apwjpg

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Fodpfsr It Swox Apwspg

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Fjdpfx Ael Hx Rpjpwjpg

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Fpodpfx Apstuyq Ajwjg

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Fpsdotuyq Repfx Apwog

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical condition, dismantled blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1 Fedjyb Sa Dopfx Apwopg

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011 Fedpfx Apety Ddxswepg