Used Paint Removal for sale (7,728)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. Kjdpfozvmy Hex Ah Dedr 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Kdjdpfx Ahjy Rimzj Der Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Kodpfx Ahjy Unmue Djdr Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Kjdpfx Ahoy Swi Ho Dodr Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Year of construction: 2017, condition: used, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 % Kdsdpfszvpwnex Ah Djr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Kdedpjykt N Sefx Ah Dor Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances Kdedpfxszuzt Ej Ah Der - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. Kodpfx Aszr H Aash Dodr The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Kdodpozcdqqjfx Ah Djr Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Kedpjzhbqqsfx Ah Dsdr

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Kjdjzbkl Sopfx Ah Dodr Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REF: MM6450 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). All equipment to be removed from the factory by the Buyer. Kodpfx Ahjzcb E Sj Dsdr

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth Ksdszi D T Depfx Ah Djdr ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: used, Liquidation of an automotive paint shop with various painting and workshop accessories, all in working order: a. BYK paint measuring device “Automatchic Vision” 7060 (345 000 010) b. Scale c. Mixing station with scale and printer d. REGAL paint manufacturing unit including remaining paints/coatings as shown in the photo The paint booth/painting system is not included in the offer but can also be purchased. Condition: Used, in working order Further equipment available for inspection/removal on site. Also available in combination with the paint booth. Kodpfx Aey Tyykeh Djdr Location: Ravensburg

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Kjdoy Urtfopfx Ah Dedr Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, 1 x Comas DP Depositor Type-800 8-lane (Serial no. 2614, Date of manufacture – 1997). Kdjdpfjzcaz Eex Ah Djr Videos available on request. All equipment to be removed from the factory by the Buyer.

Year of construction: 2019, condition: good (used), Sturm Coating System Description Kdodpfx Ahezka Sfe Dor For sale is a complete industrial Sturm robotic painting system manufactured in 2019. The automated coating system was used for the serial coating of components and originates from an industrial production facility. The used paint line includes, among other components, a paint booth, drying and cooling zones, conveyor technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification unit. Thanks to its automated system design, the robotic painting line is particularly suitable for industrial applications in the automotive industry, metalworking, and serial production. An inspection at the Hamburg site is possible by prior appointment. Technical Data & Scope of Delivery Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture of main system: 2019 Previous operation: Three-shift operation, condition consistent with age System components: Units, drying and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots, models KR 210L 150-2 / KR 210 2, manufactured between 2006 and 2012 Associated robot control cabinets 2x Yaskawa EPX 2900 robots 1x thermal post-treatment / exhaust air purification system, VeniaKab / RNV Condition Information Control technology: According to the plant maintenance department, the control technology is up to current technical standards Electrical and mechanical components: Predominantly in condition consistent with age or in good condition Cybersecurity Data Deletion For security reasons, all hard drives from the robots and PC-based stations were removed. Dismantling Ex Works Hamburg There are two options for dismantling, loading, and transport: You carry out the dismantling and loading yourself on site. If you do not have the necessary personnel or equipment for dismantling, we can provide the complete dismantling, professional removal from the production hall, and loading as an additional service. The costs are calculated by prior agreement and according to the work involved. Please contact us in advance if you are interested. “Everything from a single source: We are pleased to offer suitable bank financing for your project.” komplett-konzept.leasingo.de You can find further new and used items in our shop. International shipping costs available upon request.

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) This machine allows you to use loose 3mm pellets as well! And of course, blocks. As good as new, 1-year warranty Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning, for both small and very large projects. The benefit of this machine is that it isn’t equipped with new-generation electronics. It’s one of the most aggressive cleaning machines on the market. The unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Complete blasting set including the following equipment: Kodpfx Ahsydpy To Dodr COLD JET i3 Microclean (47 hours of use) 1 x 20' blast hose 1 x Cold Jet applicator 1 x nozzle One of the best machines in the world. No electronics. That’s why it’s reliable. Very low maintenance costs. For questions or to schedule a viewing, please contact DrDryice. All machines are supplied with a 1-year warranty. Repairs and maintenance services available for Cold Jet equipment. We also supply new Cold Jet machines. Please contact us. Worldwide shipping possible. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blaster, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Ice Press, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, tool and die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage remediation, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blaster Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Kdsdpfx Aozdqrpsh Dsr Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm 20 µm rust removal (m²/h): 13.9 20 µm oil contamination removal (m²/h): 15.3 Kodpfezq H Uasx Ah Dodr 20 µm paint / coating removal (m²/h): 10.5 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Kdedpfx Ahozvdfaj Der Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Kodpfx Aeziww Aeh Dedr Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: used, The convenient Varioflex shelving trolley is designed for flexible and gentle unloading of painted workpieces. In addition, they enable its 4 swivel castors also facilitate the transport of the Workpieces. Its sturdy tubular frame construction can be Adjustable from 200 to 2000 mm. With 17 inner and 17 outer support tubes each per side, the trolley can carry loads of up to 400 kg at to support an evenly distributed load. The plug-in inner and outer support tubes allow can be removed if required and can be fitted at the rear be reused. Kedpfx Ahezk Npaj Dsdr When not in use, the shelving trolley can be stored to save space Put together. Optional accessories – Plastic-coated support tubes – Additional rakes Technical specifications: Length: 200–2,000 mm Depth: 870–1,180 mm Height: 1855 mm Support tube length: 650 mm – extended to: 1,150 mm Clearance between pipes: 70 mm Load capacity: 400 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 2015, operating hours: 355 h, Cold Jet Aero 75 DX Machine This machine is suitable for industrial cleaning, including small and large-scale projects. Its advantage is that it does not rely on new-generation electronics, making it one of the most robust machines on the market. This machine is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, complete with the following equipment: COLD JET AERO 75 DX DRY ICE (335 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles (NEW) This is one of the best machines in the world. It has no electronics, which is why it’s reliable and relatively inexpensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. Kdsdezkq N Ijpfx Ah Dsr All machines sold come with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal using dry ice, coating removal using dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, Venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: Ksdpfx Asziwwieh Djdr High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).