Used Paper Bale Press for sale (13,976)

Condition: excellent (used), Year of construction: 2022, operating hours: 8,856 h, functionality: fully functional, working length: 12,000 mm, Press Refurbished 12m length Everything in perfect condition Operational Gedpsxfg Sbjfx Adwjiu Located at company headquarters.

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Gedpfsymmtcjx Adwjiu Your Mertens & Frowein GmbH service team

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Gijdpfxjvvk T Is Adwju We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, This offer is for a used ‘Konica Minolta AccurioPress 6136P’ colour production system Items for sale: 1 x Konica Minolta AccurioPress 6136 with the following features: incl. PF-710 paper deck incl. OT-512 output tray incl. RU-510 incl. LS-507 stacker Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Gsdpfxeza Ac Te Adwoiu Total: Approx. 13,234,766 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Canon imagePRESS V1000’ colour production system Items for sale: 1 x Canon imagePRESS V1000 with the following specifications: Includes Fiery Server D3000 Includes Booklet Finisher AF1 Includes paper deck Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,358,828 pages Colour: Approx. 1,141,255 pages Black: Approx. 217,573 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Gsdoy R Ncpepfx Adwoiu For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Canon imagePRESS C10000VP’ colour production system Item for sale: Gsdpfey Aly Ijx Adwoiu 1 x Canon imagePRESS C10000VP with the following specifications: Includes Fiery Server Pro Includes 1 x Paper Deck D1 Includes Stacker H1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 9,039,201 pages Colour: Approx. 7,444,138 pages Black: Approx. 1,595,063 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Gjdpfoh T Dctjx Adwsiu Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Gisdpeyg Hcdjfx Adwju

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Year of construction: 1994 Godpfx Ajzc Hhxedwsiu Pressing force: 157 kN Voltage: 400 Max. bale weight: 250 kg Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Godpfxjzbyf Io Adweiu Machine number: 140409 Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. The press has a second discharge chute. Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request. Gisdpfezaqymjx Adwsu Transportation is also possible.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. Giodpfxoy S Rqwe Adwsu The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2008 Giodpfxey Uil Ee Adwju Press force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm Please contact us for a video or more information.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h Gedpfxsy R Nnfs Adwsiu bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Gedpfx Aevq Rtkjdwjiu Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Gijdpfxsv Amw No Adwju Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Gsdjm Amk Nspfx Adwsiu Model: HT30036 Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 Gisdpsxm Skrefx Adweu • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 Godpfx Aendcxgsdwoiu - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Year of construction: 2006, functionality: fully functional, Baler press for bundles approx. 400 kg. Manufacturer: HSM Model: HL 3521 Year of production: 2006 Condition: good Machine has undergone major service. Oil pump replaced. Oil cylinders refurbished. After agreement, can be sold and shipped immediately. Gijdsy A Hu Hopfx Adweu

Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Year 2011-2013, price: 6000 EUR Godpfxsra Nyuo Adweiu YEAR 2018 COSTS 6000 EUR We also have HSM V-press 1160 max balers from 2014-2015 available.

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Gijdpfxsra Ak Es Adwsu Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Gedpfxsyibv Ij Adwsiu Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Gsdpfx Adsyhbxcswjiu Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Giodpfxelhqd Rj Adwju Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025