Used Paper Press for sale (28,957)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Chodpfx Aex A U Ncsfljf Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, all stainless steel belt width 400 mm adjustable speed with outfeed belt mobile Cedpfsx Apdzjx Aflohf dimensions (l x w x h) : ± 2.200 x 800 x 1.500 mm

Condition: used, Year of construction: 2008, total length: 1,900 mm, total width: 1,700 mm, total height: 2,500 mm, Weight: 2.500 kg Price: On request - Year: 2008 - Documentation available: No - CE certificate present: No - Serial number: 13436 - Drive system: CNC - Control system brand: Delem - Control system type: DA-51 - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 35 - Max. working width [mm]: 1250 - Column gap [mm]: 1100 - Throat depth [mm]: 400 - Backgauge depth [mm]: 1100 - Max. stroke [mm]: 215 - Crowning system: None - Punch holder: European-style - Tools included: Yes - Options: Finger safety guard - Motor power: 4.0kW - Transport dimensions: 1900mm x 1700mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Chsdpfx Afjx Dazmsljf Lukas van Rossum

Condition: good (used), Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces Cjdpfxjgxnkko Aflohf -Length: 515 mm -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Condition: used, Specac Specac Atlas 15T Laboratory Press with Temperature Controller, Heating Plates, and Film-Making Set Description: For sale is a complete Specac system for laboratory sample preparation. This set is particularly suitable for the production of pellets, thin films, and other samples for FTIR or materials analysis. The system includes the following devices: - Specac Atlas™ Manual Hydraulic Press (15 tons) - Specac 4000 Series™ Temperature Controller - Specac Atlas™ Heating Plates - Specac Constant Thickness Film Maker accessory set in a transport case - All relevant manuals and the original quality certificate The equipment comes from a laboratory and is in perfect technical condition. The visual condition is very good with only minor signs of use. Technical Specifications Specac Temperature Controller - Model: 4000 Series - Operating voltage: 230 V - Frequency: 50 Hz - Maximum power consumption: 1800 W - Fuse: 7 A Specac Atlas Manual Press - Maximum pressing force: 15 tons - Robust metal construction - Integrated pressure gauge - Suitable for the preparation of laboratory pellets Csdpfxjx A T T He Aflehf Specac Heating Plates - Temperature-controlled sample heating - Direct connection to temperature controller Film-Making Set - Complete accessory case - For producing uniform sheets/films - Various inserts and tools included Scope of delivery - Atlas 15T laboratory press - 4000 Series temperature controller - Heating plates - Film-making set in case - Connection cables - Original manuals - Quality certificate (Specac, 2014) Important Note: “The table shown in the photos is not included in the sale.” Condition: Used (Specifications and details are subject to change and may contain errors!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 CAPACITY 50 TONS BENDING LENGTH 2050.0 mm Chedpfx Afsuad Nfjlef OPEN HEIGHT 370.0 mm STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Condition: good (used), Year of construction: 2011, functionality: fully functional, 1 x 16-page web offset printing press Manufacturer: KBA Model: C16 Year of manufacture: 2011 Cut-off length: 620 Max. web width: 1000 mm Web direction: right to left General description: 1 x KBA splicer 4 x KBA printing units with automatic plate changing system 1 x web exit unit 1 x Megtec DualDry III 10.8-1066 dryer (without afterburner) natural gas (exhaust air volume = 4,176 Nm³) 1 x chill roller stand (4 rollers) 1 x folder support with WEKO silicon applicator Codpfx Aox Dml Eoflehf 1 x KBA superstructure (6 longitudinal slitters, 1 former) 1 x KBA folding unit (with double parallel) 1 x inline densitometer control system GMI ColorQuick 1 x Planatol 9NET gluing system 1 x cooling center Axima / Cofely i.Cool Temp.Center 1 x postpress with stick former / palletizer and optional cutting line

Condition: good (used), functionality: fully functional, Year of construction: 2004, Used Darley CNC press brake Type EHP LS 130 31 25 CL Capacity 3100 x 130 tons Delem DA 65W CNC control Y1, Y2, X and R axes CNC controlled Cjdpfx Ajxzgixsflehf CNC crowning Hydraulic Wila NS upper and lower clamping

Condition: used, Year of construction: 2000, total length: 3,700 mm, total width: 2,000 mm, total height: 2,750 mm, Weight: 8.500 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 752200069 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-80 - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 120 - Max. working width [mm]: 3000 - Column gap [mm]: 2600 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 80 - Control type: Cybelec DNC-80 - Control: CNC - Transport dimensions: 3700mm x 2000mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Cjdpfx Ajw Igwqjflohf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, BYSTRONIC XACT SMART 225/4100 PRESSBRAKE Csdpfx Afjwxykaolshf CAPACITY 4100 MM X 225 TON YEAR 2017 TOOLING FULLY GUARDED CNC CONTROL THIS MACHINE HAS JUST BEEN PURCHASED AND DUE WITH US IN THE NEXT WEEK . WE HAVE 2 MACHINES AVAILABLE IDENTICAL .

Condition: used, functionality: fully functional, Year of construction: 2007, Specification Tonnage 100 Tons Bending Length 3000mm Year of Manufacture 2007 Complete with: Cybelec DNC 60 CNC Control Lasersafe guarding Top Tool 88 Degree Standard Gooseneck Bottom Tool 4 way Multi Vee Die Chsdpfxjxx T Nao Aflsf

Condition: used, Veneer Press BÜRKLE U 80 - used - Chsdpfxsxfg A Hj Aflof Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Chjdpfxexwk E Ao Aflof Stroke 380 mm Max Capacity 100ton

Condition: good (used), functionality: fully functional, Year of construction: 1999, Neat used press brake from Safan Type CNCL K 110 3100 Safan TS1 control Capacity 3100 x 110 ton Y1, Y2 and X axis CNC controlled CNC Bombering Csdpfx Aoxzff Sjflshf Set of tools included

Condition: used, Year of construction: 2019, total length: 1,070 mm, total width: 1,940 mm, total height: 2,020 mm, Weight: 2.000 kg Price: On request - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Power [kW]: 4.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 1500 - Column gap [mm]: 1550 Chjdpfx Aexcxqqeflof - Backgauge depth [mm]: 500 - Max. stroke [mm]: 150 - Transport dimensions: 1070mm x 1940mm x 2020mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. Cjdpfx Afsxuhw Djlohf ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit Codpfx Afox Dmq Islehf heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ Cjdpfxox Dayij Aflshf with vacuum buffer tank Movable on castors Tilting press table Vacuum pump motor: 0.75 kW Vacuum regulator with digital display

Condition: used, Year of construction: 1985, Empty weight: 1.800 kg Perfecta 1000 rotary tablet press with electrical cabinet   Chedpex Au A Aefx Aflef Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 – 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: 121446, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, bending force (max.): 110 t, working width: 3,600 mm, distance between stands: 3,100 mm, number of axes: 2, oil tank capacity: 120 l, power: 7.5 kW (10.20 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Darley Press Brake EHP 110 36/31 Press force: 110 tons Bending length: 3600 mm Bending length between uprights: 3100 mm Rapid approach speed: 100 mm/sec Working speed: 8 mm/sec Return speed: 65 mm/sec Stroke length: 150 mm Control: DELEM DA 22 Total power requirement: 7.5 kW Machine weight: approx. 10,100 kg Dimensions: approx. 3650 x 1290 x 2550 mm Equipment: - CNC-controlled axes Y1 - Y2, X Chedpfxox A Ealo Aflof - Electric backgauge (X-axis) - 2x manual backgauge stops - Wila hydraulic upper tool clamping - Side protection with electronic safety - Foot switch and hand switch Machine is still in use. Service has always been performed by SafanDarley Eijsden. Blades as shown in the photo included. v10-v24 lower dies If interested, you can inspect and test the machine on location.

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg - Documentation available: No - CE certificate present: No Chedpfx Afsxr Dnmelof - Serial number: 2439 - Drive system: Conventional - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Crowning system: None - Punch holder: Standard - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: unexamined, input voltage: 220 V, Eccentric press TT, 220V, with lighting and adjustable stroke Chedpex Dkzdjfx Aflef

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Chodsx Dmqhjpfx Afljf Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Chodpsx Dmp Refx Aflof Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm Csdpsx Dmn Tofx Aflshf max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.