Used Peddinghaus Peddy for sale (139)

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Prodpfx Asw Trkgsh Asc Exact details can be found in the PDF.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 4227051519055, Offer 25361 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 – 32 mm - Strokes per minute: 22 – 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, e.g., up to 27 mm diameter in steel: 14 mm - With special punching saddle, e.g., up to 39 mm diameter in steel: 9.5 mm - Up to 90 mm diameter in steel: 4 mm - Space requirements (approx.): W 700 x H 1700 x D 1200 mm Prodpfxoxqdv Ie Ah Ajc - Weight (approx.): 1150 kg - Included: Hydraulic low-pressure center punch device - Back gauge table - Foot pedal - Emergency stop button - Various punch dies and matrices

Year of construction: 2008, condition: ready for operation (used), A Peddinghaus saw and drilling combination system is available. 1) Saw unit Peddinghaus 1100 DG, max. product diameter: 510mm, max. product dimensions X/Y: 1100mm/500mm, cutting speed: 150m/min, saw blade dimensions X/Y/Z: 9300mm/54mm/1.6mm, max. product weight: 500kg, working height: 630mm, system dimensions X/Y/Z: approx. 2000mm/4500mm/2300mm, weight: approx. 5500kg. 2) Drilling unit Peddinghaus PCD 1100, drilling spindles: 3, tool holder: MK4, spindle power: 10kW, spindle speed: 900rpm, spindle stroke: 330mm, travel path Y/Z: 470mm/1100mm, rapid traverse: 5m/min, feed rate: 300mm/min, max. hole diameter: 40mm, product thickness range: 6.3mm–460mm, product width range: 76mm–1100mm, min. product length: 1575mm, max. product weight: 8165kg, clamping pressure vertical/horizontal: 800kg/2200kg, machine dimensions X/Y/Z: approx. 2400mm/1900mm/4500mm, weight: approx. 6000kg, control system: Siemens 840D i. Without roller conveyor for saw. Including cross conveyor. The saw shows a hydraulic leak, the chip brush motor is defective, and the spindle may require repair. Documentation available. On-site inspection possible. Prjdpfx Ahexp Rbzo Aoc

Condition: good (used), punching force: 36 t, – Capacity: 36 tons – Hydraulic – 3 stations – Foot operation – Lighting – Emergency stop – 400V Podpjwdg Ipjfx Ah Ajrc

Condition: used, Max. punching capacity: 800 kN Max. shear force: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Psdpsxf E U Uefx Ah Aerc Further technical data on request With a range of punches and dies as desired

Condition: used, Maximum punching force: 1100 kN Prsdpexgquvefx Ah Asc Maximum shearing force: 1700 kN Punch throat depth: 510 mm Holes: 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel blade and profile cutting section Square notching Weight: approx. 5500 kg Including various accessories.

Condition: good (used), Vice, bench vice, metalworker's vice, parallel vice, heavy-duty vice -Parallel vice: jaw width 150 x 30 mm -Wingspan: 180 mm -Dimensions: 490/210/H200 mm -Weight: 26.2 kg Pjdpfx Aexc E D Djh Aerc

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm Pjdowth N Hjpfx Ah Aorc hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Pjdjh Uhb Sepfx Ah Asrc Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, blade length oben 211/unten 180 mm plate thickness max. 6 mm round bar steel max. 13 mm Predpfx Aoxbtrmeh Aoc weight ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm Prjdpfxovg R Rzo Ah Aoc flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: ready for operation (used), PEDDINGHAUS FLAT, PROFILE AND BAR STEEL SHEAR WITH NOTCHER AND PUNCH TYPE: 210 AD/13 MACHINE NO.: GJ 3730 YEAR OF MANUFACTURE: 1970 Equipment: various punch tools and dies (see photo) standard accessories operating tools 2 foot switches for single/continuous stroke documentation Condition: workshop-tested, functional Pjdpfx Ahsxc Ep To Aorc

Condition: good (used), – Capacity 60 tons Predpfx Ahexc Nuae Asc – Hydraulic – Double-acting – Foot control – Emergency stop – 400 V

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, Predpsc Nlyyofx Ah Ajc -Punching tool punch die with stripper -Punching dimensions: 15 x 60 mm square -Dimensions: 170/145/H235 mm -Weight: 14 kg

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Prsdpfx Aov Ta Ucjh Ajc Performance: Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still powered.

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm Prsdpfxodp U Apo Ah Asc space requirement: 1000 x 770 x 690 mm hand-guided

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm Podpsgvkmnefx Ah Aorc punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch Psdpfsv I Sxvex Ah Asrc - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: like new (used), Year of construction: 1995, Roller conveyor length: 6000 mm Rolls divided, total width: 280 mm Min.height: 630/760 mm Max.height: 1150/1300 mm Difference between the height information given by rollers and the transverse movement Prodpfx Ahsgyk A Dj Aec Weight: 625 kg

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min Prjdpfsw U U S Njx Ah Aec oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: good (used), Offer 22188 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism Psdpfx Ahjwcphce Aerc - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Outer roller width approx. 260 mm - Roller diameter approx. up to max. 100 mm - Max. possible number of rollers: 13 - 10 rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: Podpfxjxabrfe Ah Ajrc - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm Pjdpfx Ahjit T Hye Asrc - weight approx. 1800 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm Predpsmb U Slofx Ah Aoc - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Condition: used, Offer 22187 Technical specifications: Podpfx Ahowclhxe Aerc - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Outer roller width approx. 280 mm - Roller length 2 x 125 mm each - Roller diameter approx. up to max. 100 mm - Maximum possible number of rollers: 10 - 7 pairs of rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg