Used Wood Pellet Mills for sale (23,948)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Hjdpfxjxc Nt No Aacew

Condition: used, Year of construction: 2010, 212 USED WSB Wood-fired, Pellet-fired Bakery Oven. Year of manufacture: 2010. TECHNICAL DATA: - Number of chambers: 2, Hsdpfx Aoxqg Ndoacjw - Ceramic-lined baking chamber, - Pellet hopper: Capacity: approx. 300 L. EXTERNAL DIMENSIONS (in cm): - Width 300, - Depth 400 (including burners), - Height 270. CHAMBER DIMENSIONS (in cm): - Width 180, - Depth 200. EQUIPMENT: - 4 pellet burners, 2 per baking chamber. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: Hedpfx Aajwp Rqfocow • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, Kahl - Wood Pellet cooler Hjdpfxjv R Tdfj Aacow 3-5 tons per hour

Condition: used, Year of construction: 2009, operating hours: 1 h, machine/vehicle number: -----, Business Relocation – High-Quality Pellet Production Plants for Sale! For years, we have been recognized as one of the leading manufacturers of premium pellets. Due to the relocation of our production site to our main plant premises, attractive opportunities now arise for companies in the wood and pellet industry: Hjdpfxsw Tdk Sj Aacew We are offering you the chance to acquire our currently operational production plants for manufacturing A1plus grade pellets. Your Benefits • High-quality machines and equipment currently in operation • Ideal for producing premium-grade A1plus pellets • Facility visits possible during ongoing production until mid-October 2025 • Attractive conditions for prompt purchase • On-site inspection & consultation Interested parties have the opportunity to see the equipment in operation on site and gain a comprehensive impression of the condition and performance of the machinery. For initial orientation, we provide you with informative photos of the machines. Upon request, we are happy to send you detailed technical specifications and provide individual consultation. For further information or to arrange a viewing appointment, please do not hesitate to contact us:

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Hsdew Ulq Aepfx Aacjw

Condition: excellent (used), Year of construction: 2010, 153 USED PWSB Bakery Oven, Wood-Fired, Pellet-Fired. Year of manufacture: 2010. TECHNICAL DATA: - Number of chambers: 3, - Ceramic-lined baking chamber, - 6 pellet burners (2 per baking chamber). EXTERNAL DIMENSIONS (in cm) - Width: 300, - Depth: 400 (including burners) - Height: 290, Pellet hopper: - Capacity: approx. 8-10 tons, - Height: 700, - Diameter: 270 cm. CHAMBER DIMENSIONS (in cm) - Width: 180, - Depth: 200. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Hedpfoxfkx Eox Aacjw The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), 3 tonnes per hour. Factory stopped production in 2013. Kahl pelletizer was renovated in Germany. Price does not include dismantling. Hedsxlgddjpfx Aacew

Condition: used, Belt conveyor for wood pellets Hjdpfjwv Sn Esx Aacsw Manufacturer: Sew-Eurodrive Length: 23cm Width: 1 m Power: 9.2kW

Condition: used, functionality: fully functional, Blowing container for wood pellets, divided into 3 separate compartments, new tarpaulin, works fine. Has been used to blow wood pellets into silo Hodpettv Ulofx Aacjw

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. Hsdpfxetw Szaj Aacew What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING DOCUMENTATION IN GERMAN Hodjxac Hwjpfx Aacjw INFRARED LAMP for panel pre-heating SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), TECHNICAL DATA - track width 300mm - shaft width 330mm - max saw blade diameter 300mm - blade bore diameter 70mm - max cutting height 90mm - table width with extension 720mm - table length 1800mm * from above: - 2 rows of pawls - smooth metal sliding roller - planing shaft 320mm, 4-knife shaft 7.5kW - head with pneumatic brake - hold-down system - shaft with saw blades - smooth metal sliding roller * from below: - pawls - track - pneumatically adjustable pressure and sliding rollers - central lubrication - feed motor 0.75kW - main motor 30kW - overall dimensions (LxW xH) 1870x1370x1600mm - weight approx. 2500kg ADVANTAGES – planing shaft 320mm with 4-knife head – central track lubrication Hsdpowxd Ipefx Aacow – solid construction – used multi-blade saw in very good condition Net price: 29,900 PLN Net price: 7,120 EUR depending on exchange rate 4.2 EUR (Prices may change with larger fluctuations)

Condition: good (used), Year of construction: 2008, cutting length (max.): 6,100 mm, height adjustment type: electric, +Mobile Bandsaw Wood-Mizer LT70+ *Cutting length 6.1 m *Turbo diesel engine 42 HP *Cutting thickness computer Accuset Hedpsw Dt A Hofx Aacew *Band lubrication system Lube-Mizer *Electric height adjustment *Electric feed *Chassis (2,500 kg) with road approval *Debarker +Hydraulic Package 7+ *Log loader *Log turner *Side supports *Outfeed rollers *Central clamp *3 hold-down clamps *Radio remote control Max. log diameter 95 cm Max. diameter between rollers 73 cm Max. cutting width (cant) 64 cm Max. cutting height above blade 39 cm Max. cutting length 6100 mm (reinforced bed) Incl. approx. 50 saw bands.

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust Hsdpfxsun N Aue Aacjw from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: as good as new (ex-display), Year of construction: 2023, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,360 mm, cutting height (max.): 90 mm, saw blade diameter: 300 mm, Equipment: saw blade guard, Sliding table saw / Panel saw Brand: Wood-Mizer Model: MS750 Year of manufacture: 2023 Technical data Sliding table length: 3200 mm Blade diameter: 300 mm Maximum cutting height (300 mm blade): 90 mm Maximum blade diameter: 400 mm Scoring unit Maximum splitting width against fence: 1360 mm Automatic YD start Main motor: 6 kW Scoring unit motor: 0.75 kW Hjdpexlg Dkjfx Aacow

Condition: like new (used), Year of construction: 2024, operating hours: 1,000 h, functionality: fully functional, Complete Pellet Production Plant. The plant has an average production capacity of 4.5 t/h of pellets. The line, installed in Valtellina in the province of Sondrio, is complete with all necessary components for the pelletizing process: A section dedicated to loading raw material (sawdust or wood chips, smaller than G40) and its storage inside a 100 m³ silo. A second section dedicated to drying the raw material using a rotary dryer powered by a pellet burner, the entire system equipped with a cyclone bag filter for dust abatement. The line also includes a storage station for the dry material ready to be pelletized. The pelletizing station features 2 pellet mills with a capacity of 2.5 t/h each, installed in parallel. Subsequently, there is a cooling and bagging line that ends with a palletizer, enabling the finished pallet to be handled by forklift. The plant is entirely controlled via software from a control room, except for raw material and finished product loading/unloading operations, as well as the start-up and shutdown of the pellet mills. The plant comes complete with certified electrical system. The installation also includes a reception cabin and a transformation cabin, both equipped with panels and transformer. Total installed power: 500 kW. Average power consumption of the plant: 220 kW. We are interested in selling either the plant, the entire company, or a majority share. Hsdpfxewx N Tqe Aacsw There are renewable contracts in place with local sawmills for the supply of top-quality fir sawdust. A resale contract is in place for the entire pellet production with a leading Italian distributor. Maintenance, spare parts, service, and expansion contracts are also in place. Sale is due to personal reasons.

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 Hodpfx Aaeq Ul Rvjcew STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Year of construction: 2022, operating hours: 4,000 h, condition: like new (used), functionality: fully functional, Complete Wood Shavings Line Hodexq Rvuspfx Aacjw Includes: Loghaver, Vecoplan screen, 3 conveyors, dryer, and furnace Fully operational wood shavings production line in excellent condition. The equipment can be sold as a complete set or individually by parts. For more information, technical details, or photos, please contact us.

Condition: excellent (used), Year of construction: 2015, Year of manufacture: 2015 Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (timber): 64 cm Max cutting height above saw blade: 39 cm Max cutting length: 10 m Head equipment Automatic cutting thickness setting device Head feed up/down: Electric Head feed forward/backward: Electric Saw blade guide arm: Electric Saw blade tensioning system: Hydraulic with air cushion Debarker Saw dust outlet diameter: 150 mm Saw blade Hedpfsxllu Uex Aacsw Length: 4670 mm Width: 38 mm 50 mm Saw blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Hjdpfsxmaa Iox Aacow

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Hodpfx Aasxmhx Eocsw Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: – Maximum log diameter: 900 mm – Maximum log length: 5000 mm – Wheel diameter: 470 mm – Main motor: 10 kW – Electric head feed: up, down, forward, backward – Electric bandsaw blade guide – Stationary operator control panel – Manual clutch Hjdpfx Asw R Ua Seacjw MACHINE DIMENSIONS: – Length: 585 cm – Width: 180 cm – Height: 240 cm

Condition: good (used), Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Hodjxhb Uvopfx Aacow Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: good (used), Maximum log diameter: 910 mm Hjdpfxexd Tgvs Aacsw Maximum cutting width: 730 mm Minimum thickness of last board: 25 mm Maximum cutting length: 6300 mm Minimum cutting length: 1200 mm Log weight: 2000 kg Feed speed (steplessly adjustable): up to 47 m/min Output (finished product): 1.8–3.0 m3/h Main motor power: 22 kW Pulley diameter: 600 mm Wood-Mizer saw blade length: 4668 mm Wood-Mizer saw blade width: 38 mm