Used Perforation for sale (899)

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Bwsdpfx Aisdv Eu Hjwew Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, table length 1200 mm table width 800 mm 28 mm table height 450 - 800 mm 500 kg weight of the machine ca. 0,8 t Bwjdpfx Aish Dqb Sewew Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement.

Condition: new, table length 1200 mm table width 800 mm table height 840 - 890 mm weight of the machine ca. 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Bjdjih D Apepfx Aiwjww Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, maximum load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, total length: 5,374 mm, total width: 2,034 mm, total height: 830 mm, Year of construction: 2026, Humbaur Universal 3000 with wooden floor – immediately available Description: Bwjdezv Hgtepfx Aiwew A continuous floor panel rests on its hot-dip galvanized chassis and frame, providing almost universal transport options. You load the Universal trailer using two ramp boards, which are also protected against corrosion. Adjust the position of the boards to precisely match the track width of the vehicle. Then, simply slide the boards under the loading area. Secure the load using seven lashing rings to ensure it is stable. You can easily upgrade to an aluminum floor instead of a wooden floor, or aluminum side panels, or even a cover with a frame, at any time. Technical specifications: Trailer type – two-axle * Weight – 690 kg * Gross vehicle weight – 3,000 kg * Payload – 2,310 kg * Loading area length – 4,000 mm * Overall length – 5,374 mm * Loading area width – 2,030 mm * Overall width – 2,034 mm * Overall height – 830 mm * Loading height – 600 mm * Tires – 10 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin plug and reversing lights * Floor panel, 18 mm thick * 2 hot-dip galvanized ramp boards made of grating, stored under the loading area * 2 support legs as standard on the 3500 kg models * 7 lashing rings per side in the outer frame profile * Perforations in the outer frame profile * Rope winch with rope and 3-way adjustable bracket * Automatic support wheel

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 600-797, overall weight: 1,000 kg, filling opening length: 93 mm, filling opening width: 385 mm, roll width: 400 mm, rotational speed (max.): 1,770 rpm, TECHNICAL DETAILS Roller width: 400 mm Rotational speed: 1,770 rpm Infeed opening width: 385 mm Infeed opening length: 93 mm Number of axles: 2 Number of fixed blades: 18 Screen perforation: 20 mm MACHINE DETAILS Bsdpfxszuwu Eo Aiwjww Main motor power: 22.2 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,200 x 1,000 mm Unladen weight: 1,000 kg Number of transport packages: 1

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 2,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, be mindful of your CO2 footprint. The machine for processing continuous cardboard sheets listed here belongs to the series of statically operating machines, meaning that the processing steps across the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting unit for head-foot cuts and cross cuts on the cardboard. Linear cross-scoring unit for cross-scoring on the cardboard. (Delivered as a cross-scorer, cross-scorer with perforating function) Bjdpfsz Ey Awex Aiwjww 12 longitudinal scoring units from above for longitudinal scoring on the cardboard. 12 longitudinal cutting units for performing longitudinal cuts. 2) Cardboard feeder, 4-cassette system A motorized cardboard feeder with a lifting axis, implemented with 4 individual cassettes, feeds the cardboard into the cardboard infeed of the main machine body. Each cassette is capable of holding rolls of raw material with a width of up to 2,800 mm and, upon request from the machine control system, automatically feeds it to the main machine body. 3) Cardboard magazine, 5-fold 5 cardboard magazines provide and feed the raw cardboard to the processing machine. A stack height of up to 1,500 mm for continuous cardboard sheets is possible. 4) Control cabinet, control system, electronics: Contains all components required to operate and control the system. Control cabinet components are based on Siemens.

Condition: new, Year of construction: 2026, functionality: fully functional, Cardboard machine, Vision 2800, automatic type for processing continuous cardboard from a stack Machine description: Bwedpfxjz I T Ilj Aiwow The machine listed here belongs to the series of statically operating machines, meaning that the processing operations across the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting unit for head and foot cuts and cross cuts on the cardboard. Linear cross-scoring unit for cross-scoring on the cardboard. (Delivered as a cross-scorer, cross-scorer with perforation function) Longitudinal scoring units from above for longitudinal scoring on the cardboard. Longitudinal cutting units for performing longitudinal cuts. 2) Cardboard magazine, 7-position 7 cardboard magazines provide the storage and feeding of the raw cardboard to the processing machine. Stack height of continuous corrugated cardboard up to a maximum of 2,200 mm is possible. 3) Control cabinet, control system, electronics: Contains all components required to operate and control the system. The components in the control cabinet are based on Siemens.

Condition: excellent (used), functionality: fully functional, Equipment: foot remote control, Excellent condition Rotating device with adjustable height, featuring joints on both sides (the component does not need to be aligned due to the joints) Bwedpfx Aiez Hvurjwjw Motor-driven, with foot pedal, adjustable clamping range for your component Dimensions: Minimum height 550mm, maximum height 1300mm Mounting plate 440 x 300mm Base dimensions per side approximately 1600mm x 1200mm Optionally, a perforated table or a component of any size can be clamped 3000 kg load capacity, motor-braked One side driven, the other side rotates passively.

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Bwodsz Hxirjpfx Aiwsw With feed device (pendulum arm) Drive power: 90–200 kW

Condition: excellent (used), mileage: 285 km, power: 345 kW (469.07 HP), first registration: 05/2025, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 510 l, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, loading space length: 66,000 mm, loading space width: 24,700 mm, loading space height: 10,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Low noise - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 3-426 Volvo FH 460 6x2-4 construction tipper with Fassi or Palfinger loading crane, each with day registration. Immediately available, depending on crane type and size (subject to prior sale). Immediately available at a special price. Volvo FH 460 6x2-4 FH Globetrotter - Safety cab Long-haul version with a lower sleeping berth Engine 13 l, 469 hp / 345 kW, 2346 Nm, Euro 6 Stage E Automatic transmission I-Shift, 12-speed I-Shift driving mode: Standard, Performance and Economy VEB+ Volvo Engine Brake Suspension: leaf spring / air Tag axle, electro-hydraulically steered and liftable Tire size, front and tag axle: 385/65 R 22.5, drive axle: 315/80 R 22.5 Wheelbase 4,900 mm Trailer hitch ROCKINGER 400 G 150 Active Safety Package: ACC adaptive cruise control, driver alert system, lane change assist, lane keeping assist LED main headlights LED taillights Driver's seat, comfort, air-suspended, heated, seatbelt integrated in the seat Automatic climate control Auxiliary heater Cool box with freezer compartment 33 l High instrument cluster with digital, fully dynamic driver information display, 4 views selectable Traffic sign recognition (in conjunction with LSS-DW (lane keeping assist)) Size: 12 inches with chrome trim Second driver information display, 9" touch color display and more Body: Modern construction pallet body Body dimensions L x W x H: 6600 x 2480 x 1000 mm Side boards, 1x divided (2 flaps) per side with side board release, including sliding folding steps Substructure: 45° perforated outer frame is designed as a steel welded structure. KTL & powder coated and/or hot-dip galvanized Lashing rail recessed in the center in the direction of travel 4x work lights 1x toolbox Loading crane: Fassi or Palfinger Various crane sizes / crane types and designs in stock. This is a non-binding offer. Subject to prior sale, errors and changes. General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,777 cc GVWR: 26,000 kg Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Rear axle 2: Tire size: 385/65-22.5; Lift axle; Steered; Suspension: Air suspension Bwodpfx Aez Ilgysiwjw Functional Crane: Rear of the chassis Body brand: PAVIC construction premium tipper with rear loading crane Condition Technical condition: very good...

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar Bsdpfx Aozxnu Djiwoww - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm Infeed opening 1000 x 800 mm LW V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Bedpfx Aisznnf Uewsww Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. Bsdpfx Aiszmx Scewoww ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037065, empty load weight: 5,503 kg, maximum load weight: 33,497 kg, overall weight: 35,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,160 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 53 %, color: grey, - The images are archive photos! The vehicle may still be in use! - # Chassis - Fine-grain steel welded construction, Basic, fifth-wheel plate with replaceable 2" kingpin - Curved front end - 24 t two-speed landing gear, single-side operation, straight lower section, without compensation movement - 1 wheel chock with holder - Folding underrun protection - Half-shell mudguards - Integrated "mudguard bracket", stone-repellent surface - Aluminium hook-on ladder approx. 3 550 mm with "safety plus" and side holder - Rear towing hook (not on Revolution) - # Axles and suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-aligned" to reduce tyre wear and fuel consumption - Air suspension - 1st axle automatic lift axle, also electrically operable from the tractor unit, incl. forced lowering and traction assistance, no installation on tractor unit (traction assistance works up to 30% axle-load overload and max. 25 km/h) - "Hot-dip galvanised lift-axle mechanism" - # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at front, without connecting line - 24 V EBS, electronic braking system with front EBS socket, without connecting cable - With raise/lower valve - # Vehicle driving stability system - Automatic tipping-related lowering with shut-off valve - Axle-load detection via EBS CAN bus signal for cab display; tractor unit must be suitably prepared; no installation on tractor unit (not a calibrated weighing system) - # Wheels and tyres Bwjdj Adpwbspfx Aiwjw - 385/65 R22.5 - Steel rims, factory silver - # Electrical system - 24 V, LED multi-chamber lamps, yellow LED side lighting, LED number-plate light - Yellow LED side lights linked to indicators, "flashing side lights" - 2 white LED front position lamps - 2 white/red rear outline marker lights, LED - 1 x 15-pin socket at front, without connecting cable - Additional integrated recessed LED work lights at rear, switched via reversing light - # Hydraulics - Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm - (without hose connection) - Hydraulic operation via tractor-unit PTO - Hydraulic connection with hose and HDK screw plug, NW = 48 mm, with knurled nut - # Body - Round steel body in "Stone Master Design", made from highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mounting - Internal access step at front wall - Greenline - tapered, aerodynamic body shape - Shovel and broom holder on outside of front wall - Tailgate as pendulum flap with "double-joint hinge", externally mounted, with double hook locking - Continuous 4 mm side walls, 4/5 mm floor, wear- and weight-optimised construction - "Flip Top Schiebeverdeck", automatic rear closure with folding bows. Cover moves forward. Electrically driven cover, with front 7-pin socket (charging plug), without connecting cable (pin 1: + / pin 3: -), incl. loose tractor-unit socket, no installation on tractor unit; operated on trailer and by radio remote control - 7-pin coiled connecting cable to tractor unit for sliding cover; socket on tractor unit must be available (pin 1: + / pin 3: -) - # Paintwork - Frame: DB 7350 Novagrau - "10-year anti-perforation warranty" - Landing legs: black coated - Body: RAL 9010 pure white - Roll-over cover: RAL 7035 light grey

Condition: used, Stauchmaschine in einem guten Zustand - Cardboard Grooving Machine in good condition. Stauchmaschine für Kartonagen - Cardboard Grooving Machine Polygraph BN 135 Serial-No. 54306 Arbeitsbreite / Working width max. 1350mm Bwsdpoz H A H Uofx Aiwew Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 14,135 mm Number of bays per rack row: 5 Number of levels plus floor level: 5 Technical specifications for volume: Pallet spaces per bay: 18 Number of pallet spaces per row: 90 Total number of pallet spaces: 90 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 6x pallet rack uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Bedowbqh Uspfx Aiwjww Height: 9,000 mm Depth: 1,100 mm 50x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA116x40|SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 100x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 14,135 mm Number of bays per rack row: 5 Number of levels plus floor level: 2 Technical data for volume: Pallet spaces per bay: 9 Number of pallet spaces per row: 45 Total number of pallet spaces: 45 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 6x pallet rack uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Height: 3,000 mm Depth: 1,100 mm 20x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA 116x40 SEG5 Bwedswh Nqujpfx Aiwjw Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 40x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf uprights that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Storage platform 4,000 x 5,000 mm, load capacity 500 kg / m² Included in the scope of delivery: 4 uprights, single-sided 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 diagonal braces 9 chipboard panels P6, 3,000 x 850 x 38 mm, underside white, topside natural including fastening material including load capacity signs Bwsdpfx Aisd Hl D Dowsw Dimensions, technical data Steel structure: 4,000 x 5,000 mm Floor area: approx. 20 m² Height to top of flooring: freely selectable up to 3,500 mm (other heights available upon request) Clearance height underside: top surface minus 338 mm Load capacity: 500 kg / m² Uprights: 100 x 100 x 3 mm Main beams: C-profiles C+300 x 3 mm (perforated) Cross beams: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, single-sided white P6 Uprights in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire red RAL 5003, sapphire blue Other colors available upon request! Accessories, such as stairs, railings, etc., are not included in the scope of delivery. These can be supplied for an additional charge.

Condition: new, Storage platform 8,000 x 5,000 mm, load capacity 500 kg / m² Dimensions / technical data Dimensions of steel structure: 8,000 x 5,000 mm Dimensions of floor area: 8,000 x 5,000 mm Floor area: approx. 40 m² Height to top of floor covering: up to 3,500 mm (freely selectable) Clear height from underside: top minus 338 mm Net load capacity: 500 kg / m² evenly distributed load Included in the scope of delivery: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 mounting angles Bwedpsd Htr Hefx Aiwow 3 diagonal braces 18 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top natural including fastening material including load signs Supports available in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire red RAL 5003, sapphire blue (Other colors available upon request!) Main and cross beams galvanized We also manufacture the storage platforms to any other desired size. Prices on request! Accessories, such as stairs, railings, etc., are not included in the scope of delivery. These can be supplied for an additional charge. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Plan machined, very solid weight approx. 950 kg Bodpfovm Dk Iox Aiwoww With table base Price is without accessories

Condition: new, number 10 Stk. clamping range 15 - 50 mm 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m Bsdpfx Aijvki E Eewjww Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 1,000 kg, 1000 kg load capacity complete set including hand and double foot remote control Bwsdpfx Aijvllhrjwsw 3-axis welding rotary table, height adjustable with through hole 200mm Plate diameter 900mm with T-slots alternatively with screwed on solid perforated plate 2000 x 1000 x 200mm, thickness 20mm, hole pattern 100mm, diameter 28mm Height horizontal min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Inclination up to 135° Hand and double foot remote control with speed display very robust Price is without accessories, accessories with very reasonable surcharge Table top surcharge €1900 (only in conjunction with positioner)

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Ideal for welded constructions, fixture construction, welding templates Special price promotion €2000 discount Bedpfx Aevlplzjiweww 3-D perforated table 2400 x 1200 x 200 mm Thickness of the table top 20 mm, diameter of the holes 28 mm, grid 100 mm Pivoting range 360° Height adjustment hydraulic motor 800 to 1200 mm Lifting movement hydraulic, rotation movement 360° Control with hand remote control Speed 0.5 rpm Hydraulic motor AC 2.2 KW Current AC 380 V Motor power 0.75 KW Price includes offered perforated plate 2400 x 1200 x 200 mm Price includes accessories shown, surcharge €2000 We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 Kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 2000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 3000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 5000 Kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with height adjustment manually or automatically

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. Bjdpfx Aetyy Sfoiwoww As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: excellent (used), Year of construction: 2012, Professional automatic packaging machine from a renowned European manufacturer. Suitable, for example, for packaging food, technical articles, printing and paper products, household and toy goods, and textiles. -Electromotive sealing frame movement (no pneumatics required). -Stable foot switch for manual activation. Alternatively, automatic process start is possible by entering a time interval on the display. -Sealing frame dimensions: 500 mm x 400 mm. -Tunnel opening: Width 450 x Height 230 mm. -Maximum film roll width approx. 600 mm. Bwsdpfx Aiez Sy Saswew -Conveyor belt can be adjusted steplessly in height using a hand crank. -Perforation possible via 2 adjustable needle rings. -Roll holder is adjustable. -Product insertion is adjustable. -Machine can be moved and locked in place using rollers. -380 V / 50 Hz / 5.0 KW. -Installation dimensions approximately: Length 2.2 x Width 0.9 x Height 1.5 m. -Weight approximately: 270 kg. Numerous adjustment options on the control panel: -Automatic mode / Manual mode. -Tunnel temperature. -Sealing temperature. -Cooling time / Holding time during sealing. -Transport time of the conveyor belt. -Transport speed of the roller chain. -Cycle time for automatic operation. Multilingual documentation with operating instructions, parts lists, and circuit diagrams is included in the scope of delivery. The machine has been used little and then stored for several years. It can be demonstrated while powered on.