Used Perforation for sale (921)

Condition: used, maximum load weight: 13,180 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,710 mm, loading space width: 2,480 mm, loading space height: 3,005 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2016, Vehicle No. G0123166_1 – Manufacturer: Krone. * Sliding roof tarpaulin * Simple corner fittings * Insertion strip (wood) * Outline marking, rear * Load securing certificate, Code-XL * Load securing certificate, beverages * Side sliding tarpaulin * Telescopic support legs * Device for rail loading * Lashing points * Perforated pallet restraint bar Used roof tarpaulin. Load securing certificate VDI 2700 / load securing for beverages. Delivery time: IMMEDIATELY AVAILABLE. Used tarpaulin. Technically ready for use without further repairs. Substructure with signs of wear. Valid UVV (accident prevention regulations). LASI CODE XL!!! Ljdpfx Ajzgb Nwjl Noac Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex warehouse D-59302 Oelde. Further details upon request, please contact us by telephone or email.

Condition: used, maximum load weight: 13,900 kg, overall weight: 16,000 kg, first registration: 01/2001, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2001, Vehicle no. G0123449_1 - Manufacturer: Krone. * Simple corner castings * Forklift accessible * Lashing options * Perforated pallet stop bar Delivery time: IMMEDIATE. Technically operational condition, no further repairs required. Undercarriage shows signs of use and some surface rust. Occasional paint peeling on swap body components. Localized rust spots on swap body components. Deformations/bumps on parts – see pictures. Several units available! Dimensions are approximate. Offer is subject to prior sale and non-binding. Prices are net, ex location D-59302 Oelde. For further details, please contact us by phone or email: Lajdpfx Aljzgb H No Noc

Condition: used, maximum load weight: 13,160 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,710 mm, loading space width: 2,480 mm, loading space height: 3,005 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2016, Vehicle No. G0123167_1 – Manufacturer: Krone. * Simple corner brackets * Contour marking, rear * Load certificate Code-XL * Load certificate for beverages * Portal door with double swivel rod locks (inside) * Side sliding tarpaulin * Forklift accessible Lsdpfjzgcadox Al Neac * Telescopic support legs * Device for rail loading * Lashing points * Perforated pallet stop rail Roof tarpaulin, used. Load securing certificate VDI 2700 / load securing for beverages. Delivery time: IMMEDIATELY AVAILABLE. Tarpaulin, used. Technically operational condition without further repairs. Substructure with signs of use. UVV (occupational safety) certificate valid. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill Ledpezf Ng Uofx Al Njac -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products Lsdpfx Alszb Elyo Njac • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 350 h, load capacity: 200 kg, empty load weight: 6,700 kg, construction height: 1,970 mm, fuel type: electric, total length: 6,050 mm, drive type: Elektro, arm reach: 7,600 mm, construction width: 1,500 mm, working height: 15,000 mm, Articulating boom lift Technical condition: normal Front tires type: solid rubber Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Laodpfxoxuw Nvs Al Noc Description: The Manitou 150 AETJ-C electric articulating boom lift is the lightest in its class, which means it exerts relatively low ground pressure with its wheels. With a lifting capacity of 200 kg and a working height of up to 15 m, this self-propelled work platform is the ideal solution for your transport and maintenance tasks. The drive battery can be recharged frequently and stands out for its long service life. In transport mode, the 150 AETJ-C remains under 2 m in height. Thanks to its compact design, it is easy to find storage space for this lift. Efficient work at height is made possible by the performance of the AETJ 150-C’s articulated platform. This electric model for two operators offers a maximum working height of 15 meters and features a basket with a perforated floor, perfectly suited for industrial requirements. With its articulated boom and robust construction, this machine can also operate in confined spaces. Avoid obstacles and improve responsiveness with the 150 AETJ-C. Thanks to the pod’s high autonomy, you can work all day without needing to recharge the machine.

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment Lodpfox D E Huex Al Neac • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information The equipment is in like-new condition because the project for this purchase never materialized.

Condition: excellent (used), Offset printing machine HEIDELBERG GTO V 52 4 col. max paper size 36x52 cms. Straight machine 4/0 Lajdpozdq U Dofx Al Nsc Serial n. 704799. 34 mil. real impressions Alcolor dampening system Baldwin refrigeration and recirculation system CPC 1.02 table control for automatic ink and plate registers Numbering and perforating unit with cams, wheels and perforators Quick clamps, plate punch Complete with all parts, tools, and accessories. Country of origin: Germany HS code: 8443 131 00 Weight : 5.500 Kgs.

Condition: new, SSI Schäfer PR 600 Longitudinal beam 2700 mm Pallet racking beam with a clear width of 2700 mm for three Euro pallets per pair of beams next to each other. Lsdpjwv Rvnefx Al Njac The traverse can be loaded with up to 1500 kg per pair of traverses. Suitable for pallet racking system PR 600. For quick adaptation of your shelving or easy replacement The longitudinal beams guarantee a force-fit and form-fit connection with the shelf supports With welded-on 5-hook suspension brackets Height-adjustable in the 50:50 mm system perforation grid As a replacement for damaged shelf beams and for extending existing shelving systems. Technical data: Manufacturer: SSI Schäfer Truss type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height-adjustable at 50 mm intervals 5-hook suspension lugs Material: sheet steel Surface: painted Color: gentian blue RAL 5010 Profile: 80 x 40 mm Type: CE 80 Manufacturer order no., 334380 Scope of delivery 1 x longitudinal beam 2700 x 80 x 40 mm blue Suitable for almost all pallet racking with 50:50 mm system perforations e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion Further racks in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, SSI Schäfer PR 600 Longitudinal beam 2700 mm Pallet racking beam with a clear width of 2700 mm for three Euro pallets per pair of beams next to each other. The traverse can be loaded with up to 2600 kg per pair of traverses. Suitable for pallet racking system PR 600. For quick adaptation of your shelving or easy replacement The longitudinal beams guarantee a force-fit and form-fit connection with the shelf supports With welded-on 5-hook suspension brackets Height-adjustable in the 50:50 mm system perforation grid As a replacement for damaged shelf beams and for extending existing shelving systems. Technical data: Ljdpewv Rrcefx Al Noac Manufacturer: SSI Schäfer Truss type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height-adjustable at 50 mm intervals 5-hook suspension lugs Material: sheet steel Surface: painted Color: gentian blue RAL 5010 Profile: 100 x 40 mm Type: CE 100 Manufacturer order no., 334750 Scope of delivery 1 x longitudinal beam 2700 x 100 x 40 mm blue Suitable for almost all pallet racking with 50:50 mm system perforations e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion Further racks in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, empty load weight: 3,080 kg, maximum load weight: 11,320 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lodpezgar Defx Al Neac

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ledpfjzf H Ucex Al Neac

Condition: new, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Lsdswv Tqbspfx Al Neac Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: used, empty load weight: 5,580 kg, maximum load weight: 13,220 kg, overall weight: 18,800 kg, axle configuration: 1 axle, first registration: 01/2022, next inspection (TÜV): 04/2027, loading space length: 11,070 mm, loading space width: 2,480 mm, loading space height: 2,485 mm, loading space volume: 68 m³, total length: 11,070 mm, suspension: air, tire size: 315/70 22,5, tire condition: 90 %, color: green, Year of construction: 2021, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Vehicle number for inquiries: 41144 Spier, Box body * Year of construction: 2021 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Air suspension * Fixed roof * Air coupling (red + yellow) * 15-pin connector * Lifting and lowering device * Inspections: MOT / Emissions test 04.2027 * Suspension: Air * Gross vehicle weight: 18,800 kg * Unladen weight: 5,580 kg * Payload: 13,220 kg * Permissible gross vehicle weight: 18,800 kg * Axle manufacturer: SAF * Tire condition 1st axle: 90% / 90% - Tire size: 315/70 R22.5 * Tire size: 315/70 R22.5 * Internal dimensions: L = 11070 mm, W = 2480 mm, H = 2485 mm * Internal volume: 68 m³ * Pallet spaces: 27 * Large Palfinger tail lift: MBB 3000 S - 3 tons * 5-row load securing rail * Perforated rail in the floor and ceiling * Telescopic rods * Reversing camera * Roof hatch * Side door * In top condition * Highlight: MOT valid until 04/2027 / Top condition / 3-ton tail lift Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates Ledpfsy S Rcgsx Al Neac * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm Ledpfx Aloy I Srze Nsac - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: excellent (used), mileage: 285 km, power: 345 kW (469.07 HP), first registration: 05/2025, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 510 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 66,000 mm, loading space width: 24,700 mm, loading space height: 10,000 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, seat heater, soot filter, trailer coupling, - Aluminium fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Low noise - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/multimedia system - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Warming automatic - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 3-426 Volvo FH 460 6x2-4 Construction Platform Truck with Fassi or Palfinger Loader Crane, each with day registration. Available from €189,999 net, depending on crane type and size (subject to prior sale) Immediately available at a special price. Volvo FH 460 6x2-4 FH Globetrotter - Safety driver's cab Long distance specification with lower sleeper bunk Engine 13 l, 469 HP/345 kW, 2346 Nm, Euro 6 Step E I-Shift automatic transmission, 12-speed I-Shift drive modes: Standard, Performance, and Economy VEB+ Volvo Engine Brake Leaf/air suspension Trailing axle electrohydraulically steered and liftable Tyres FA + TA 385/65 R 22.5, Drive RA 315/80 R 22.5 Wheelbase 4,900 mm AHK ROCKINGER 400 G 150 Active safety package: ACC adaptive cruise control, driver alert system, lane change support, lane keeping assist LED main headlights LED rear lights Comfort driver's seat, air-suspended, heated, integrated seat belt Automatic climate control Lajdpfxsy E Hu Sj Al Noc Auxiliary heater Coolbox with freezer compartment 33 l High instruments with digital, fully dynamic driver information display (4 views selectable) Traffic sign recognition (in conjunction with LSS-DW (lane keeping assist)) Size: 12-inch with chrome trim Second driver information display, 9" touch colour display And much more. Body: Modern construction material platform with pallet capability Platform dimensions L x W x H: 6600 x 2480 x 1000 mm Sideboards 1x split (2 flaps) per side with sideboard release, including sliding foldable steps Substructure: 45° perforated external frame as steel welded construction. KTL & powder coated and/or hot-dip galvanized Central lashing rail recessed in the direction of travel 4x work lights 1x toolbox Loader crane: Fassi or Palfinger Various crane sizes/types and configurations in stock. This is a non-binding offer. Subject to prior sale, errors, and changes. General Information Cab: Long-distance Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc GVW: 26,000 kg Axle configuration Brakes: disc brakes Front axle: tyre size: 385/65-22.5; steered; suspension: leaf suspension Rear axle 1: tyre size: 315/80-22.5; differential lock; suspension: air suspension Rear axle 2: tyre size: 385/65-22.5; lift axle; steered; suspension: air suspension Functional Crane: rear-mounted on chassis Body make: PAVIC Premium Construction Material Platform with Rear Loader Crane Condition Technical...

Condition: used, functionality: fully functional, Dans cette offre, vous achetez un système de perforation d'occasion "GBC SteamPunch Ultra". État : Il s'agit dans cette offre d'un appareil d'occasion qui peut présenter des traces d'utilisation. (petites éraflures ou jaunissement). Lsdpfxsrvhyzs Al Njac Le fonctionnement de l'appareil a été testé. Emballage et expédition : Vous pouvez volontiers venir voir l'appareil pendant nos heures de bureau. Veuillez prendre rendez-vous à cet effet ! Un emballage résistant à la mer et une expédition dans le monde entier sont possibles sur demande ! Pour plus d'informations, vous pouvez bien sûr nous contacter personnellement.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Ljdsd Hkqhspfx Al Noac Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, empty load weight: 3,026 kg, maximum load weight: 11,374 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle inside width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lasdpfx Aezfpvisl Nec

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Storage platform, 12,000 x 5,000 mm, load-bearing capacity 500 kg/m² Dimensions/Technical Data: Dimensions of steel structure: 12,000 x 5,000 mm Dimensions of floor area: 12,000 x 5,000 mm Floor area: approx. 60 m² Height to top of floor covering: up to 3,500 mm (freely selectable) Clearance height underside: top surface minus 338 mm Net load-bearing capacity: 500 kg/m² evenly distributed load Included in the scope of delivery: 8 uprights, single-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross beams S+300 x 2 mm, L = 4,800 mm (closed) 26 mounting brackets 3 diagonal bracing 24 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top surface natural including fastening material including load signs Uprights available in the following standard colors: RAL 7035 light gray RAL 7016 anthracite gray RAL 3000 fire red RAL 5003 sapphire blue (other colors on request) Lsdsd Htr Repfx Al Nsac Main and cross beams galvanized We also manufacture storage platforms to any other desired dimension. Prices on request. Accessories such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied for an additional charge. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Shelf testing Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: like new (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x Stacking box, 2nd choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.840 kg Additional data/information: Hole pattern: 117 Bottom and all 4 side walls offset Round hole diameter: approx. 12 mm Distance: approx. 14 mm center-to-center - with through handles on both end faces - with folded edge Please note: These are stacking boxes, 2nd choice. Scratches, dirt, or color imperfections may be present. General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet Lasdpohm Sllsfx Al Njc (without unloading)

Condition: like new (used), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the shelf traverse: Manufacturer: SSI Schaefer Racking system: R 3000 Truss type: KTRZ 31036 Included in delivery are: 02x shelf trusses, II. choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm perforated grid: approx. 53 mm agraffe: 3 HK (hooks) Lsdpen D Ebzsfx Al Neac weight | pcs.: 1,700 kg max. load per truss pair 200 kg with evenly distributed load 01x wooden shelf, II. choice chipboard width: approx. 985 mm chipboard depth: approx. 755 mm material thickness: 22 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: Jung Heinrich Type: Esmena Included in delivery: Lasdpfx Alewbf Ams Njc Pallet rack upright, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Incl. cross and diagonal braces, Foot plates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 14,135 mm Number of bays per rack row: 5 Number of levels plus floor level: 2 Technical data for volume: Pallet spaces per bay: 9 Number of pallet spaces per row: 45 Total number of pallet spaces: 45 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 6x pallet rack uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Height: 3,000 mm Laedpfjwh Nqusx Al Noc Depth: 1,100 mm 20x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA 116x40 SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 40x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf uprights that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm

Condition: good (used), The scope of delivery includes: 01x End upright extension, used Shelving system: Bito Type: PRO Material color: sendz. galvanized Frame profile: P5 Profile dimensions: 120 x 76 x 2.25 mm Grid perforation: 50|50 mm Height: 500 mm + extension bracket Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Lodpfx Asyfq Hwjl Njac General information about the item: This item is offered for collection only. If transport or shipping of this item is desired, additional costs will apply; these can be requested from us depending on the place of delivery and scope of supply.