Used Perforation for sale (882)

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 4,474 kg, shelf height: 5,585 mm, total length: 12,600 mm, total width: 2,720 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, maximum load weight: 900 kg, load capacity per stand: 900 kg, Equipment: double-sided, Double-sided cantilever rack in painted steel, RAL 5015, for indoor use, OHRA H60K system. Used material, sold as seen and liked. Composed of: 5 columns and bases IPE240, height 5585 mm plus extensions (total height approx. 7000 mm), 3 columns and bases IPE220, height 4985 mm plus extensions (total height approx. 5500 mm), 2 columns and bases IPE220, height approx. 4285 mm. Rack length: 12,600 mm; width: 2,720 mm, with L-shaped rails at 2,750 mm. Includes 110 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg per arm. Complete with bracing, connecting hooks, and bolts (excluding floor anchoring). L-shaped perforated steel guide approx. 30 meters. Prjdpfx Asygmz Hjlcja Material is disassembled, strapped, and ready for transport (transport at buyer’s expense). Transport and VAT not included in the price.

Condition: used, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 223,613 km Body interior / exterior: * Sliding curtain on left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated outer frame (Multilock) * Pallet stops on left and right * Screen-printed floor for 7,100 kg forklift axle load * 23 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks Prsdpfx Aleym H I Hecsa * Access ladder * Storage box * Reversing lights * Rear fog lamp Chassis / other equipment: BPW Eco Plus axles * Air suspension * Raise and lower function * ABS, EBS * 385/65 R 22.5 tires * Remaining tread approx. 5 - 15 mm ---- Non-binding offer from Bocholt location. Subject to prior sale and errors. Sale only to traders or for export.

Condition: used, maximum load weight: 29,510 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2016, next inspection (TÜV): 10/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 349,026 km Body interior / exterior: * Sliding curtain left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated external frame (Multilock) * Pallet stop left and right * Anti-slip phenolic plywood floor suitable for forklift axle load up to 7,100 kg * 36 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Toolbox * Reversing lights Prjdpfeym H I Tjx Alcsa * Rear fog light Chassis / additional equipment: BPW Eco Plus axles * Air suspension * Height adjustment (raise and lower) * ABS, EBS * Tires 385/65 R 22.5 * Remaining tread approx. 7 - 14 mm ---- Non-binding offer from location Bocholt, subject to prior sale and errors. Sale only to commercial customers or for export.

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Prodpfx Alewv Hmvscea Partially overhauled New rotor bearings

Condition: new, SSI Schäfer PR 600 Longitudinal beam 2700 mm Pallet racking beam with a clear width of 2700 mm for three Euro pallets per pair of beams next to each other. The traverse can be loaded with up to 1500 kg per pair of traverses. Suitable for pallet racking system PR 600. For quick adaptation of your shelving or easy replacement The longitudinal beams guarantee a force-fit and form-fit connection with the shelf supports With welded-on 5-hook suspension brackets Height-adjustable in the 50:50 mm system perforation grid As a replacement for damaged shelf beams and for extending existing shelving systems. Predpfowv Rvnsx Alcoa Technical data: Manufacturer: SSI Schäfer Truss type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height-adjustable at 50 mm intervals 5-hook suspension lugs Material: sheet steel Surface: painted Color: gentian blue RAL 5010 Profile: 80 x 40 mm Type: CE 80 Manufacturer order no., 334380 Scope of delivery 1 x longitudinal beam 2700 x 80 x 40 mm blue Suitable for almost all pallet racking with 50:50 mm system perforations e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion Further racks in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2018, Year: 2018 Condition: very good Multifunctional finishing machine for digital printing Configuration: Psdpfoww Etqox Alcsra - CCD camera - 6 rotary knives - cross cutting unit - creasing unit - RTM - automatic perforating and scoring unit - PC ALL in one - SW jobcreator

Condition: used, functionality: fully functional, machine/vehicle number: 2132, empty load weight: 6,178 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 11/2025, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, wheelbase: 1,310 mm, color: white, Year of construction: 2014, Equipment: ABS, Schmitz mega trailer with lifting roof, Code XL, Edscha, 1 lift axle, portal doors, side perforated lashing rail, German vehicle from first owner. Sale only to commercial traders and under exclusion of any warranty. We deliver to any German seaport. Prodpfow Tik Rjx Alcsa

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels Psdpfxjxduclo Alcera - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Podpjx R Amnefx Alcsra Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Podpjx S Etmjfx Alcsra Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, total length: 1,100 mm, total width: 1,320 mm, total height: 1,050 mm, input frequency: 50 Hz, Sheet metal cleaning machine KD-Putz Tubur Premium Sheet metal cleaning machine for baking trays / perforated sheets short side raised stainless steel version with oiling system & sheet metal trolley Pjdpfeyv U Nfjx Alcjra connection 400V, 16A CEE plug dimensions: 1320 x 1100 x 1050 mm, WxDxH used machine, available from a bakery.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: Prsdpfow Ryt Dex Alcea -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: Pjdpfxsyim S Io Alcora - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Square, straight perforation (QG) 20mm Sheet thickness = 6mm !!! Over 500 screening drums manufactured per year speaks for itself !!! - Premium quality! - Always inspected! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Small bridges for optimal screening area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requirements are not a problem for us – they are our specialty! - All drums are painted! Prsdpfjxnyhhox Alcea - Large stock selection! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM718 Square offset perforation (RV) 80mm Prjdpsxnyzuofx Alcsa Sheet thickness = 10mm !!! More than 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Thoroughly tested! True running in operation! - Best price-performance ratio - Short delivery times! - Precision-punched perforations for perfect screening results! - Various perforation types (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Different sheet thicknesses! - Various materials available (min. S355)! - Special customer requirements are not a problem for us, but our speciality! - All drums are painted! - Large stock selection! - For all common screening machines!

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Includes wireless remote control Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: - Load capacity 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic Pedsx Thyropfx Alcera - Load capacity 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic

Condition: new, Year of construction: 2025, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Psdpfx Alsx Th Sbjcjra Tabletop thickness: 20 mm, hole diameter: 28 mm Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Fodpz Aer Uft Deq A Tepb Load capacity 500 kg, dimensions 1000 mm x 1500 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500 mm x 3000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demo unit. Can be viewed and tested in our showroom. Self-collection or delivery available (plus transport costs). Equipped with integrated heating. Key Features: - Professional cleaning in a closed cycle using water, blasting media, and cleaning agent - Suitable for very wide wheels (up to 360 mm width) - Narrow wheels are stabilized by a pneumatic wheel support to prevent tipping - 50°C water temperature thanks to built-in heater for improved cleaning performance - After the wash cycle, wheels are blown off with compressed air - Automatic, environmentally friendly wheel washing machine - Minimal water consumption - Time savings due to automatic washing process - Robust stainless steel casing - Programmable water heating - Double noise insulation - Washing chamber and pump sump - Compartment for drive and controls Technical Specifications: Dimensions (W x D x H): 960 x 1,220 x 1,450 mm Weight (empty): 290 kg Water volume: 300 l Blasting media capacity: 25 kg Rated output (motor and drive): 6 kW Heating capacity: up to 50°C with 4 kW Wheel diameter: 560 – 800 mm Wheel width: 135 – 360 mm Max. wheel weight: 60 kg Washing program durations: 40 / 60 / 120 seconds Heating time: 60 – 120 min Water temperature: 50°C Working media quantity: 20 kg Pump capacity: 600 L / min Electrical connection: 230/400 V, 50 Hz, 6 kW Recommended fuse: 25 A (32 A CEE plug) Min. operating pressure: 4 bar Max. operating pressure: 10 bar Noise level: 89.5 dB (A) Scope of delivery: 1x 360 HP wheel washing machine 1x Blasting media 25 kg 1x Blasting media basket 1x Rubber mat 1x Sound insulation foam Prodpsx Hgb Uofx Alcea 1x 30 liters washing fluid 1x Perforated PVD noise reduction filter

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% Prjdpsgbkkrofx Alcea - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, empty load weight: 650 kg, maximum load weight: 2,050 kg, overall weight: 2,700 kg, loading space length: 4,100 mm, loading space width: 2,040 mm, tire size: 195/55r10c, Tilting car trailer from trailer manufacturer TEMARED, model CAR KEEPER 4020S. This car transport trailer is suitable for most passenger cars, and even vehicles with low ground clearance can be easily loaded. Predpfxogwftho Alcsa The standard equipment of the car transporter includes a tilting function with lifting assistance through weight distribution, a lateral perforated profile, lashing eyes, a support wheel, a rope winch with holder, retractable loading ramps, a welded and hot-dip galvanized frame, and a V-shaped drawbar. All equipment and technical data can be found below. This passenger car trailer for car transport is also available with a closed floor. We also offer cost-effective accessories for trailers, such as tarpaulins and frames, wooden floors, sideboards, toolboxes, car lashing straps, lashing straps, supports, and anti-theft devices.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,18 t dimensions 1,2 x 0,8 x 0,85 m Psdpfsgazm Iox Alcjra Special offer !!! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice)

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Pjdpfx Aoy D S Sgslcera

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Psdpfxjy Ep Rys Alcera

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 750 kW (1,019.72 HP), Drying Technology Title: Multi-material Dryer + Boiler Condition: Used – Very good condition Description: For sale: multi-material dryer Brand: Gerdes System with perforated moving floor Moving floor driven by electro-hydraulic power unit 3 levels 2 fans per level (6 fans in total) Control cabinet with high-performance PLC Temperature sensors for each level Blockage detector LASCO wood chip boiler 750 kW Fully automatic Remote monitoring Ash screw conveyor and automatic ash removal Fire protection flap Complete package sold with various accessories (screws, conveyors, etc.) Prjdsyyddgspfx Alcoa - Hydraulic power unit - Material receiving bin - Belt conveyor - Rotary screen - Auger elevator for feeding the dryer - Reclaim auger under the dryer - Trough screw conveyor - Filling chamber and wood chip storage tank for the boiler - Chip receiving bin and screw conveyor - 2 control cabinets - Various spare parts (pipes, clamps, electric motors, filters, cyclone, etc.) To be seen on site. Excellent working condition. Also for sale: KAHL pellet press, complete installation with bagging system. More information on request.

Condition: used, Year of construction: 1981, Format: 680 mm Equipment: with 1x perforating tools with 1x creasing tools Pjdoy Dufcopfx Alcsra perforating machine with electric motor