Used Pet for sale (574)

Condition: used, Year of construction: 2009, Folding & Creasing machine Petratto Cordoba 3 Year: 2009 Knife Creasing and Folding Machine Description: - Feeder: Horizon - RFU-54 Hnodpfxjx Ndy Ts Aadoh - Creasing station - Excl. glue unit - Buckle folding section with 3 buckle plates - Delivery with pressing: PGN 66 - SC10 type 500

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. Hnodpelypy Eofx Aadsh The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3776, conveyor belt length: 9,000 mm, conveyor belt width: 650 mm, total length: 9,000 mm, total width: 1,350 mm, We offer this used Peter Martin B650 conveyor belt, year of manufacture 2016. Manufacturer: Peter Martin GmbH & Co. KG Machine no.: 6776 Length: 9 m Transport width: 65 cm Overall width: 135 cm If you have any questions or require further information, please feel free to send us a message or give us a call. Hnsdpoyarkmjfx Aadjh

Condition: good (used), Year of construction: 2002, UV flexo printing technology UV drying system GEW drying type GEW Hedpouy Nt Sjfx Aadenh air-cooled UV lamps inspection camera BST Corona device varnishing the material can be used from 157 - 333 mm max. print width 320 mm die cutting unit with insertion option three position die cutter 1x magnetic cylinder 85 teeth, 7x printing cylinder 85 teeth + bearings 1x magnetic cylinder 92 teeth, 7x printing cylinder 92 teeth + bearings 1x varnishing roller the machine does not include a hot embossing, lamination, cross-over, embossing, screen printing printed 41 045 hours Magnetic cylinder: 85 + 92 teeth 7 pcs printing cylinder 85 teeth 7 pcs printing cylinder 92 teeth 2 pcs back pressure cylinder 1 pcs UV lamp 2 pcs varnish cylinder 7 x ink fountain 1 x varnish pump anilox cylinder 2 x GTT XS 1 x GTT XP 1 x GTT S 320/2,5 220/6 160/9

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 3520.17.137, Tripet TST201CNC No. 3520.17.137, Year of Manufacture: 1987 Hjdpfx Aewffmmjadjnh Power: 76 kW

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm Hjdpfx Asw Ucxqsadonh All technical data are provided without guarantee and are subject to possible errors or omissions.

Year of construction: 2011, condition: used, Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades. Accessories: Sawblade holder, Stepless variable speed control of the sawblade drive, Hodpfou Dk Edex Aadsnh Pre-selectable timer. Circular saw blade diameter: 1600 mm Power of geared motor: 0,1 kW Brush motor performance: 0,75 kW Connected load approx.: 400 V / 50 Hz Weight approx: 310 kg Dimensions W x D x H approx.: 2400 x 850 x 1550 mm colour: blue/grey

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Hedpfx Aaju Utaisdsnh Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Hnedpfx Aeu Tg Sisadoh

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding depth: 100 mm, grinding length: 300 mm, overall weight: 3,500 kg, grinding diameter: 50 mm, workpiece spindle speed (max.): 28 rpm, outer diameter: 100 mm, Manufacturer: TRIPET Model: TST 100 (CNC) Machine type: Internal cylindrical grinding machine / Internal Grinder 🔧 Performance & Movement Hnjdpfxoykbbce Aadoh 📏 Max. grinding length: 100 mm 🌀 Internal grinding diameter: 0.5 – 50 mm 📐 Z-axis (axial movement): 350 mm Drive: Indramat AC motor Speed: 0–9 m/min Resolution: 0.0005 mm 🛞 U-axis (radial workpiece movement): 100 mm ➡️ X-axis (radial grinding head movement): 50 mm 🔄 B-axis (swivel): manual −30° / +60° ⚙️ Grinding Spindle & Workpiece Spindle 🛠️ Grinding spindle (standard): Fischer HJN 1028 ⌀ 100 mm Max. speed: 28,000 rpm Motor: 3 kW Operating range approx. 2,000 – 6,000 rpm 🧲 Workpiece spindle (B-axis): Max. load: 25 kg Speed: 45 – 1,600 rpm 📐 Accuracy & Control 📏 Machine accuracy: roundness error < 0.0005 mm 🖥️ CNC Control: TRIPET NUM 750 or Brüsch TPS 3000 (depending on version)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. Hjdpfxjyf E Tfs Aadenh This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: used, DOEBELI PETEWE FSM TFc is a CNC tool and cutter grinder delivering high precision, excellent accuracy and reliable performance. Working capacities: 4 axes; table 500×290 mm; X 120 mm, Y 50 mm; resolution 0.0001 mm; max. grinding diameter 200 mm; max. grinding wheel Ø250 mm, bore 46 mm; grinding head ±30°; spindle nose HSK 40. Technical specs: grinding spindle stepless from 1500 to 6000 t/min; spindle motor 2.5 kW; voltage 50 Hz 3x 400 V; weight ≈2500 kg; overall dims 1800×1700×1900 mm. Accessories: coolant system 80 l, redressing device, profile projector, cold light, central lubrication. Engineered for tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Hjdpfjxx U D Eox Aadsnh

Condition: used, Year of construction: 1997, weight of the machine ca. 3 t Dimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’ Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’ Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Automatic band saw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Type: PEHAKAMAT 360 ZP Hjdpfxev I Erce Aadjnh Year of manufacture: 2000 Saw blade: 5.600 x 41 x 1,3 mm Working range: 90° round 360 mm 90° square 360 x 360 mm Special features: roller conveyor 1,300 x 380 mm hydr. belt tensioning Dimensions Weight: 3 tonnes

Condition: used, -Dimensions LxWxH: 785x1430x1265mm -Serial number: 178829 -Dough capacity: 120 kg -Flour capacity: 75 kg -Water capacity: 45 L -Bowl capacity: 186 L -2 speeds -2 timers -Power: 5.33 kW -Voltage: 400V -Weight: 488 kg MAG Eco 120 Fixed Bowl Spiral Mixer The VMI fixed bowl spiral mixer is renowned for its ability to knead small quantities of dough relative to the total bowl volume. It is perfectly suited to the production of traditional breads, specialty breads, and pastries. This model provides bakers with a high level of versatility and operational flexibility, making it an ideal complement to oblique axis mixers. A powerful, quiet motor and optimized transmission ensure consistent and repeatable kneading performance. Hodpfxoxwl Hns Aadonh The hinged lid design facilitates easy access to the dough. An ergonomic and precise control panel offers quick operation and consistent results. Its compact footprint allows installation even in the most confined bakehouse areas. Stainless steel construction enhances hygiene and ease of cleaning. - Dough quantity: from 3.2 kg up to 120 kg - Flour quantity: from 1.9 kg up to 75 kg - Water quantity: from 1.3 kg up to 45 kg - Bowl volume: 186 liters

Condition: like new (used), Year of construction: 2015, 420 mm 2015 Tools 6-color etc. Hnedpfxex Hhz As Aadjh

Condition: new, Year of construction: 2013, Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313, 3pcs. Hedpfx Aevvh H Eeadsnh

Condition: new, Year of construction: 2014, machine/vehicle number: 44704, Petrol Valves A182-F51, type BALL, 12", class ASME 600, body A182-F51 NACE. New. Hnjdpfjvvh Szex Aadsh

Condition: new, Petrol Valves batterfly valve 24inch, 150# New equipment purchased from Statoil. Hsdpfx Aaovvhvyjdjnh

Condition: not inspected (used), Year of construction: 2002, functionality: not functional, disc diameter: 1,000 mm, Double-disc lapping machine hydraulically operated Disc diameter, outer Ø 1010mm, inner Ø 310mm Planetary gear unit, type 28/5, optionally 6 Carrier plate, type T28, quantity 5, optionally 6 bar Hydraulics 6 bar Electrics, 400V, 50 Hz, 230V Measuring control, +/- 2µm accuracy Upper drive, 2–160 rpm Hnjdpfx Aajg E I Npodeh Lower drive, 2–160 rpm Inner pin ring 2–50 rpm Weight approx. 4000 kg Dimensions (LxWxH) approx. 4560x3830x2900 mm Machine can be inspected Delivery: EXW as inspected Payment: strictly net after receipt of invoice

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Hnedpfsxhc Spsx Aadjh Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: used, mileage: 788,500 km, power: 335 kW (455.47 HP), first registration: 01/2018, gearing type: automatic, emission class: euro6, Equipment: air conditioning, -Peterbilt 579 -First registered: January 9th, 2018 -Paccar engine -455 HP -Euro 6 -10-speed Eaton Fuller automatic transmission -Mileage approx. 788,500 kilometers -Disc brakes -Rear axle, air-suspended -Adjustable fifth wheel -Axle lock -Aluminum rims -Aluminum tanks -Full fairing -Adaptive cruise control with brake assist -2x sleeping berths -2x seats, air-suspended -Refrigerator -Cruise control -Air conditioning -Adjustable multifunction steering wheel -On-board computer -Digital tachograph -Radio -Brake system converted to EC standard -24 volt light & ABS system for trailer operation -German registration The vehicle has just arrived and is currently being converted. But it can be viewed at any time. Price: 87,800.00 ¤ net You can find more pictures on our homepage: Subject to errors and prior sale Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to the EC guidelines, e.g. the braking system. We also refine the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, paneling (leather, fabric), etc. PTO and ADR approvals are also possible in-house. If your dream vehicle is not included, contact us. We will then import your dream truck Hedpfx Aaep Nny Uedsnh (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV approval, AUv

Condition: used, mileage: 646,750 km, first registration: 07/2018, fuel type: diesel, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, parking heater, Vehicle Incoming Soon - Peterbilt 389 - First registration: 2018 - Paccar engine - Euro 6 - Mileage approx. 646,750 km - 18-speed Fuller manual transmission - Front/rear axle air suspension - Disc brakes - ABS - Adjustable fifth wheel - Differential lock - Aluminum rims - Aluminum tanks - Stainless steel sun visor - Rear lamp bar with LED lighting - Brake system converted to EU standards - 24V system for trailer lighting and ABS - 2x air-sprung seats - 1x sleeper bunk - Auxiliary heater - Air conditioning - Cruise control - Engine brake - On-board computer - Adjustable steering wheel - Electric windows - Electric mirror adjustment - Heated mirrors - Central locking with remote control - Sound system - Radio & CB radio - Refrigerator - TÜV/Emission test new – temporary registration Price on request Hedpfxspbw Etj Aadjnh Further pictures available on our website. Subject to errors and prior sale ISO 9001:2015 certified Every imported truck is converted in our workshop in accordance with EU regulations, e.g. the braking system. In addition, we refine vehicles according to customer requirements. Examples: Custom-made stainless steel parts, interior conversions, paneling (leather, fabric), etc. PTO and ADR certifications are also available in-house. If your dream vehicle is not listed, please contact us. We will import your dream truck (any make, used or new). Prices include: Shipping, customs clearance, conversion to EU regulations, German TÜV approval, emissions testing.

Condition: new, Year of construction: 2025, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! Hjdpfeg H Tn Isx Aadonh - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: not inspected (used), Peter frequency converter FUS 037/CV from automation system. Hnjdpfst Nhr Rox Aadeh worked until recently, but has not been checked €120 per unit. all 4 units €400

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min Hodpfx Aotxitvoadjnh OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.