Used Petrol for sale (240)

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm Hnsdeyhzhnjpfx Apnjl - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: refurbished (used), Year of construction: 2018, operating hours: 73 h, functionality: fully functional, machine/vehicle number: 3810181000030, overall weight: 200 kg, fuel: super 95, Nilfisk SR 1000 (petrol version) is from 2018 and has only 72 operating hours. It has been fully inspected and cleaned by us. It features an electric filter cleaning system and is very well suited for small to medium-sized areas such as parking lots. The hopper has a capacity of 50 liters and can be easily emptied. Technical specifications: Working width: 100 cm Area performance: 3,850 m²/h Container volume: 50 liters Hsdpfx Asxny Tqepnenl Weight: 200 kg

Year of construction: 2016, condition: ready for operation (used), Vibratory plate Wacker Neuson WPP 1540AW, year of construction 2016, 86 kg, petrol, water tank, ser.no.30119556 Hnedpef A Nwlefx Apnsl

Condition: used, mileage: 173,000 km, power: 63 kW (85.66 HP), first registration: 10/2014, fuel type: gas, CO₂ emissions: 168 g/km, fuel consumption (urban): 9.3 l/100km, fuel consumption (extra-urban): 5.8 l/100km, fuel consumption (combined): 7.1 l/100km, color: blue, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Optional extras: Audio controls on the steering wheel, Driving assistance system: Hill Start Assist (HSA), Rubber floor mats, Parking pilot system, Pre-installation for mobile phone/cell phone with Bluetooth interface Hnodpfx Asmid Hpopnjl Further equipment: Airbag passenger side can be switched off, Airbag driver/passenger side, Electrically adjustable exterior mirrors, Exterior mirrors in body color, Brake assist, Rev counter, ecoFLEX package, Electric brake force distribution (EBD), Electron. Traction control, Driving assistance system: Speedmonitoring, Luggage net / pocket on front seat backrest, Tailgate handle in body color, Cabin filter: Pollen filter, Isofix mounts for child seat on rear seat, Body: 3-door, Adjustable steering column (steering wheel), Model upgrade, Engine 1.2 ltr. - 63 / 61 kW 16V bivalent, Petrol / LPG, Gas engine (LPG), Rear fog light, Tyre repair kit, Tyre pressure monitoring system, Folding rear seat backrest, Low-emission according to Euro 5 emissions standard, Front side airbag, Height-adjustable front left seat, Seat cover/upholstery: fabric, 6x15 steel rims, Body-coloured bumpers, Tinted windows

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. Hnjdsi Riytspfx Apnsl pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Hodpek Unitjfx Apnenl Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: used, mileage: 1 km, first registration: 11/2006, overall weight: 3,000 kg, BIOTEC No 1 Scrub-Suction Machine with Transport Trailer Zikun ZKDA 300B BIOTEC No1 Oil Spill Wet Cleaning Machine * Ford petrol engine, hydrostatic drive * Commissioned in 2006 (EC Declaration of Conformity available) * Heat exchanger (overhauled), hot water up to 80°C * High-pressure system for cleaning as well as hand lance with 20 m hose * Detergent tank with pre-spray system * 1x mesh box with spare parts such as 2 new sets of brushes, brush roller, squeegee lips, and much more. _____ ZIKUN "Blitzer" Warning Panel Trailer Type: ZKDA 300B First registration: 03/1989 * 2 x BPW axles (NEW) with drum brakes * Tires 205/65 R 17.5, approx. 70-80% tread remaining * Loading ramp with hand crank * Flashing panel stored on trailer frame incl. control unit Both the trailer and the suction machine were regularly maintained. Spare parts catalog available. German vehicle Technical inspection (HU) for trailer valid until _____ Hjdpfx Apox Iaibenjnl New main inspections / safety inspections or weight reductions/increases are possible upon request. We are happy to assist you with obtaining export/transit license plates. We can also arrange delivery of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for typographical or printing errors. Subject to prior sale and changes. Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for our customers. The key strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 sqm you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an outstanding all-round service package and provide a competent contact person to assist you with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading: We are happy to help you load your purchased vehicles. Arranging special transports: We are happy to organize special transports for you. Temporary/export license plates: We are happy to assist you in obtaining export/short-term license plates. Customs clearance: We are happy to handle customs formalities for you.

Condition: new, Brugger HX14 shredder - compact, powerful and ready for use anywhere! The Brugger HX14 shredder combines maximum performance with impressive mobility. With its powerful 25 HP petrol engine and the ability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding gardening and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily anywhere - whether in the garden, on construction sites or to remote locations. Efficiency and flexibility in one device! Your advantages at a glance: • Powerful: 25 HP petrol engine for powerful shredding • Large capacity: Processes branches and trunks up to 14 cm in diameter Hedevpfutspfx Apnsnl • Compact design: For easy handling and space-saving transport • Mobile and flexible: Ready for use anywhere with a trailer and road approval • Ideal for professionals and demanding projects: Reliable and durable for daily use The Brugger HX14 - your powerful partner for maximum mobility and efficiency! Dqqhzd Technical data: • Dimensions - 274 x 125 x 175 cm (l x w x h) • Weight - 383 kg • Blade - 2.36 cm wide • Max. diameter - 14 cm • Processing/h - 10-14 m³/h • Feed hopper on the drum - 36 x 14 cm Contact us for a tailor-made offer!

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. Hedpolu Dc Nsfx Apnenl The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Hnsdpfxspz I Nce Apnol Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Hnjdpfx Apsx Uy Rlonol Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: new, Year of construction: 2026, Available in stock Advantages: Universal assembly system. Pump system with the built-in filter for filling in/out the tank with bitumen emulsion. Built-in heating system (gas propane burner). BS-500 can be mounted on a trailer or transport vehicle like a pick-up. Asphalt Sprayer BS-500: Hnjdpjd Swg Hjfx Apnjl Power block (Petrol Engine HONDA GX-160, air-cooled - 3.6 kW). Engine power – 3.6 kW. Fuel gasoline. Hand spraying rod length – 4 m. Spraying bar length – 7 nozzles. Emulsion tank – 500 l. Warranty – 1 year.

Condition: new, Year of construction: 2026, BITUMEN EMULSION SPRAYER BS-2000 - Spray bar for 11 nozzles with a width of 2.4 m - Spray width with tyre - 2.4-2.8 m - System cleaning - 3-level, diesel fuel - Tanker self-pumping function - Mounting on a frame or on a trailer on request - Emulsion tank heating system - Own 2000 l tank - Possibility of connecting a third-party compressor for cleaning the sprinkler bar - Mechanical thermal sensor - Lance for manual sprinkling Completing: - Tank truck 2000 l - Power block - Hose - 4m with rod and nozzle for manual spraying - Hoses for supplying bitumen emulsion - Spray bar for emulsion with 11 nozzles - Gas burner with regulator Hnodpfevpg Eaex Apnsl Specifications: Power block (Petrol Engine HONDA GX-200) Engine power – 4.1 kw - Spray rate of bitumen emulsion with hand lance4 l/min - Spraying rate of bitumen emulsion through tyre 55 l/min - Engine 4-stroke petrol engine with air cooling - Bitumen emulsion consumption 0.8 l/m2 - Tank capacity 2000 l - Recommended gas cylinder 27 l (not included) - Overall dimensions (portable) without trailer 257*190*160 cm - Shoulder weight (without emulsion) 715 kg Price: 9600 Euro (Netto) Price on the trailer: 15000 Euro

Condition: new, functionality: fully functional, Year of construction: 2026, BS-500 PRO Even the best road coating wears during exploitation. Heavy traffic, unfavorable weather conditions, and other factors negatively affect the asphalt. Bitumen pressure distributor BS-500 PRO – is the number-one equipment to protect the load-bearing structure of the road with surface treatment. The model has a safe and inexpensive heating system, responsible for maintaining the required temperature of the emulsion. The 500-liter emulsion tank is insulated with solid mineral wool. Technical Specifications Engine power (petrol, air cooled)-4.3 kW (5.8 hp) Emulsion tank capacity-500 l Productivity-28 l/min Nozzles on the spraying bar- 7 pcs Spraying width-1.7 m Diesel cleaning system Spraying bar is modularised, consisting of 3 sections, with rubber protection plates that protect against contamination and emulsion in unplanned areas Remote control of the spraying bar Electric starter Tank self priming function Hnjdpovuaccsfx Apnjl Emulsion tank heating system Ability to connect a third party compressor for cleaning the spraying bar

Condition: used, Year of construction: 2022, ----Construction: Stihl KombiMotor Grungerät KM 131/R with quick coupling, petrol engine 36.3 cm³, 1.4 KW/1.9 HP, vibration value left/right 6.1/6.5 m/s, weight 4.4 kg. Accessories: Stihl sweeping brush KB-KM (sweeping width approx. 600mm) + Stihl scythe attachment FS-KM with grass cutting blade. Sale only to commercial customers. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT+ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice). Hsdpfsvycvpox Apnenl

Condition: used, Year of construction: 2007, ----Construction: Bomag tamper BT 60/4, year of manufacture 2007, weight 62 kg, base dimensions: 340x280mm, Honda petrol engine GX 100 / 2.5 KW Hnsdpfx Asvxpc Hepnjl Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door Hsdpfx Apowhy T Tsnjnl - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, fuel type: gasoline, overall weight: 1,500 kg, operation weight: 1,600 kg, maximum load weight: 1,600 kg, lifting height: 1,110 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1600 WITH HYDRAULIC JIB - NEW TECHNICAL SPECIFICATIONS: • Lifting capacity: 1250 kg - PICK & CARRY • Hydraulic jib lifting capacity: 650 kg • Lifting capacity: 1600 kg with blade • Standard support blade Additional blade options: • Forks • Tow hook • 3 hydraulic extensions • Boom opening angle: 65 degrees • Vertical reach: 10 m - with optional equipment • Non-marking tracks • Extendable undercarriage: 780-1250 mm • Radio control • Column rotation: 50 degrees • Toggle gear • Optional 500 kg or 990 kg winch • Fixed and magnetic LED lighting AVAILABLE POWER SUPPLY VERSIONS: 3-in-1 - petrol engine, electric motor (230 V, 400 V, 110 V available) and lithium-ion batteries Diesel - powered only by the petrol engine Diesel-electric - powered by a petrol engine and a 230 V, 400 V, or 110 V electric engine OPTIONAL EQUIPMENT AVAILABLE: • 500 kg or 990 kg winch (optional) • Manual jib arm - extends reach by 1 m - Can be used with two manual jib cranes • Searcher hook - works in 6 positions, extending reach by 0.5 m • Radio control with display Hsdpfx Asyrf D Depnonl • Platform for standing on the machine - Platform for standing on the machine to increase counterweight (not necessary in standard use) • Load platform extension - Removable load platform extension 500 m • XP Mount - Mount for the XP Glass Grabber - Mount for the XP Glass Grabber • RAL Color - Choose your machine color from the RAL palette • Tow Hook - Option to attach a tow hook to the crane's transport platform • Ramps - 2.5 m long aluminum ramps The Befard XM1600 is a modern pick-and-carry mini crane designed for maximum functionality and mobility in challenging working conditions. Its compact dimensions easily fit through standard doorways, and the extendable crawlers, up to 1250 mm wide, ensure stability and safety during lifting operations. This versatile model offers an impressive reach of up to 11.2 meters – enabling work at second-story height. The XM1600 mini crane can move loads up to 1250 kg, and with the dozer blade, its maximum lifting capacity increases to 1600 kg. The optional winch further enhances application flexibility, making the XM1600 mini crawler crane ideal for assembly, service, industrial, and construction work. Test equipment before purchase. * The listed price is for the basic gasoline-powered version. * Product available upon request. * Net price.

Condition: new, functionality: fully functional, fuel type: gasoline, fuel tank capacity: 10 l, color: yellow, operation weight: 500 kg, lifting power: 350 kg/m, lifting height: 1,600 mm, Year of construction: 2025, Equipment: all wheel drive, The KINGWAY HERACLES H130 is a surprisingly compact machine with great capabilities, equipped with a hydrostatic 3WD drive. Thanks to its compact dimensions and a turning radius of just 993 mm, it boasts exceptional maneuverability, allowing work in narrow passages. The machine features a mounting plate compatible with "Avant" and "Multione" attachments, further increasing its versatility. With a maximum lifting capacity of 350 kg and a tipping load of 400 kg, it is ideal for agriculture, construction, as well as larger private estates. Its low operating weight of 500 kg and easy transportability make it the perfect solution for users seeking a mobile and versatile machine. The KINGWAY HERACLES H130 is perfectly suited for agricultural enterprises, construction companies, electrical and plumbing businesses, as well as renovation firms and other service providers. We also guarantee custom after-sales service. The machines are manufactured under European technicians’ supervision, based on a robust design that enables operation under all conditions. TECHNICAL DATA: Model: H130 Operating weight: 500 kg Lifting height: 1600 mm Engine: PETROL Fuel type: Petrol Cylinders: 2 Displacement: 740 cm³ Emission standard: EU Stage V & EPA Tier 4 Final Max. torque: 47 Nm at 2500 rpm Cooling system: Air-cooled Operating voltage: 12 V Battery: 20 Ah Max. tipping load: 400 kg Max. lifting capacity: 350 kg Operator’s cab: None Travel speed: 0~15 km/h Steering angle: 0~360° Turning radius (inside/outside): 0/993 mm Hodpfowifvcsx Apnjnl Standard tires: 18×9.50-8 Fuel tank: 10 l Hydraulic oil tank: 10 l Hydraulic flow: 29 l/min Hydraulic pressure: 160 bar Transmission type: Hydrostatic Length: 1854 mm Width: 993 mm Bucket width: 1000 mm Height: 1304 mm THE MACHINE IS FITTED WITH DIFFERENT TIRES THAN SHOWN IN THE PICTURES. THE CURRENT TIRES ARE DISPLAYED IN THE LAST TWO PHOTOS. PRICE: Net: €6,600 Gross: €7,854 WARRANTY: Every machine comes with a 12-month warranty which can be extended for a further year. After the warranty period, we guarantee our customers access to all spare parts. SERVICE: We have our own mobile service, which caters to all our customers inside and outside Germany. KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. We have been active in the European market for 25 years and import and sell approximately 3,000 to 4,000 machines annually, earning the trust of many customers.

Year of construction: 2017, operating hours: 31 h, condition: excellent (used), Used and barely operated hot water steam system from market leader HEATWEED - Environmentally friendly and chemical-free solution for eliminating weeds, moss, and unwanted vegetation - Forklift-compatible with pallet fork pickup - Suitable for private, commercial, and municipal use Hjdpjw Nx E Nofx Apnenl - Perfect addition for landscaping, gardening, or street cleaning service providers - Model: HEATWEED 22/8 - Efficient petrol engine - Year of manufacture: 2017 - Only 31 operating hours - Constant water temperature between 98° and 99° Celsius - 500-liter water tank - Weed lance - Hose reel with 15m length - Usable and extendable up to 45m - Daily cleaning capacity of 1,700 – 2,500 m² - Water consumption up to 8 liters per minute - Pressure continuously adjustable up to 50 bar - Noise level: 76 dB - Tank capacity: 31 liters - Net weight: 310 kg - Combined frame for unit and water tank - Dimensions (L x W x H): 1,050 x 800 x 1,035 mm - Technical documentation available - Original price: €19,800 net Shipping on pallet possible

Condition: new, Title: STOCK CLEARANCE: New Generators & Power Units (1-500 kVA) – Pramac / CGM – Immediately Available Description: Looking for emergency power systems available for instant delivery—no long waiting times? We offer one of the largest stocks of new generators available on-site. Technical Details & Scope: Power Range: 1 kVA to 500 kVA Hnodpoyifn Iefx Apnjl Fuel: Diesel and petrol Categories: Emergency power, continuous duty, site generators, light tower units. Condition: NEW & in original packaging. Thanks to our extensive stock, we can respond promptly to enquiries – ideal for large-scale buyers, resellers, or export to crisis regions (e.g., Ukraine). Your Benefits: No lengthy lead times. On-site inspection of goods possible. Large quantities available for projects. Interested? Send us your requirements now. We will promptly provide you with an offer for a suitable solution.

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 300 mm - Ascending section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Hnsdpev Su Stsfx Apnsl Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 23 T40 cleats welded centrally, pitch approx. 400 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!

Year of construction: 2023, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 2,500mm Rising area: 800mm Lead angle in bend: 40° Total conveyor length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Hnsdpsk Scxisfx Apnol Drive: motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 2-layer particularly laterally stable Usable width 370mm

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Hodpfxoi Igiko Apnenl Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Height of horizontal: - Conveyor belt width 600mm (extendable) Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced Hnsdpfoi Igzfjx Apnjl PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm