Used Piercing Press for sale (12,414)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) Nlodpfsg Iihwsx Ahzsb c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, Nlodpfx Ahshma Smszob b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t Nledpfxofxygwe Ahzsb cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg Nlsdpsgz H Dhjfx Ahzeb p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

Condition: new, Year of construction: 2026, pressing force: 100 t, Single-Column Press – 100 t – C-Frame – 700 × 750 mm – Hydraulic Press For sale is a hydraulic single-column press (C-frame) with a pressing force of 100 t. The machine features a table size of 700 × 750 mm, a maximum daylight opening of 550 mm, and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly, and forming tasks in industrial production environments. ==== Technical Data & Information: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Information - Design: Single-column press / C-frame - Pressing force: 100 t - Table size: 700 × 750 mm - Max. distance ram – table: 550 mm - Working height: 1,000 mm - Overall dimensions (W × D × H): 1,200 × 1,150 × 2,550 mm - Total weight: approx. 5,800 kg - Frame: Welded steel construction - T-slots / boreholes: DIN 650 / 22 mm ==== Hydraulic Cylinder - Stroke: 400 mm - Piston rod: Ø 80 mm - Cylinder: Ø 140 mm - Max. working pressure: 270 bar - Interchangeable press head: Ø 100 mm ==== Hydraulic Power Unit - Return speed: 14 mm/sec - Working speed: 9 mm/sec - Hydraulic pump: ASC - Flow rate: 19 l/min - Motor power: 7.5 kW - Oil tank capacity: approx. 70 l - Hydraulic manifold / valves: Duplomatic - Pressure display: Manometer - Pressure adjustment: adjustable - Sensors: limit sensor and pressure switch - Cooling: air cooling - Hydraulic power unit: mounted on top of the press ==== Electrical Equipment - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 7.5 kW - Total connected load: approx. 10 kW ==== Control Cabinet - Protection rating: IP54 - Reserve space: 30 % - Cooling: available - Interior lighting: available - Operating mode selector: lockable ==== Operation - Manual operation via hand-lever valve - Foot pedal control - Pressure adjustment via pressure relief valve - Manometer display - Emergency stop on control panel ===== Assembly work, forming processes, straightening operations, pressing operations, industrial manufacturing Njdpfxoytql Ae Ahzjlb Hydraulic press, single-column press, C-frame press, workshop press, assembly press, straightening press, industrial press, production press

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Nljdpfx Aofh Izmehzob Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Nlsdpfsfhmuvex Ahzob Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec Nodpfxsfxyire Ahzjlb

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec Nodpfjfxyi Iox Ahzslb quantity of oil:220 l

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t Nljdpfx Ajfxyh Hehzsb :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm Nodpfx Ahsfhcc Rozslb total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: used, Year of construction: 2019, pressing force: 250 t, pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm Nedpfjd Nq Idex Ahzolb return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Nledpfx Ahsyvz H Rszsb Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake Njdpsvwcduofx Ahzslb 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Nledpewrza Aofx Ahzeb Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed Nsdpjkvnggofx Ahzelb 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke Nodpfx Ahswp Nv Hezjlb 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Nlsdpfx Ahekvmi Sszsb Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Nlodjulwzmspfx Ahzeb Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Nsdpex Sw Sujfx Ahzslb Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Nedpfx Ahsygkuwjzjlb Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Nlodpfx Ahjx Sxukszsb Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width Nlodpfx Aewpkv Iehzeb 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Nlsdswyuqkopfx Ahzeb Table Length: 1600mm Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Nledpfxeyc R Nme Ahzeb Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!