Used Pile Turner for sale (522)

Year of construction: 1997, condition: used, Built in 1997 Bedpfxedm U Dhs Aaajda Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Size max 400 x 320 mm min 100 x 80 mm Pile length max 800 mm Speed max 3-13 m/min infeed height adjustable 400-950 mm Delivery height 950 mm Bedpfxodxxike Aaasda

Year of construction: 2000, condition: used, Size max 420 x 320 mm Bsdpfec Rtvuex Aaaeda min 170 x 100 mm Product thickness max 110 mm min 10 mm Pile height max 280 mm Speed max 7200 c/h

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size max 450 x 320 mm min 140 x 100 mm Bjdpfxsd Ewfij Aaajda Product thickness max 40 mm Speed max 16.000 c/h Pile height max 280 mm min 150 mm Infeed height max 940 mm Delivery height 850 mm

Year of construction: 1991, condition: ready for operation (used), Built in 1991 section height max 160 mm Size max 1.250 x 1.650 mm Pile height max. 1.250 - 1.400 mm lifting capacity 3.000 kg Equipment • air table Bedpod Idf Hofx Aaajda

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Fork length 1.000 mm lifting capacity max 1.200 kg Stroke height 1.000 mm Fork distance (outside edge) 560 mm Equipment suitable for Euro-pallets (80 x 120 cm) Bdjdsd Idalspfx Aaasa • with forks

Year of construction: 1992, condition: used, Size max 320 x 250 mm min 160 x 120 mm Bdedpjc Rmtzsfx Aaaea Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min

Year of construction: 2003, condition: good (used), Built in 2003 Size: max 460 x 310 mm min 125 x 100 mm Pile height magazine: max 240 mm Speed: max 8.000 c/h Equipment: gathering machine: Bedpfx Aajfu H Sueaoda • 24 stations

Year of construction: 2002, condition: good (used), Built in: 2002 Size: min 105 x 105 mm max. 310 x 510 mm Pile height magazine: max 250 mm Pile height transport channel: max 80 mm Feeding height: ca. 920 mm Bdsdpfx Aodyk Rfsaasa Mechanical speed: 12.000 c/h Equipment: gathering machine: • hand feeding station • 15 stations • rejection unit AS 840

Year of construction: 1986, condition: good (used), Built in: 1986 Size: 460 x 310 x 60 mm Bdedpfx Asdymnboaasa Speed: 6.000 c/h Equipment: • hand fed • 18 clamps • resting table • milling station • equalizing-leveling • hotmelt spine gluing unit • gauzing station • pile cover feeder • four line scoring • cover pressing station

Year of construction: 2004, condition: good (used), Platform with hydraulic lift for ergonomic manual pile-down onto Euro-pallets. Hydraulic lifting via hand or foot control . Bdedpfx Aajg Nkfusaja Lift height: 900mm max load: 1.000 kg Voltage: 400 / 50 Hz Pressure: 135 bar Dimensions (L x W x H): 1200 x 850 x 1200 mm

Year of construction: 1989, condition: used, Built in: 1989 Bdjdpfxsdg Uq Ae Aaaoa Size: max 1.700 x 1.300 mm lifting capacity: max 2.000 kg Stroke height: 1.000 mm

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Bdedpfx Aasyaiyrjasa Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Bodpfxeyk Ip Tj Aaajda Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahlfolder KD 66/ 4KTL - FD Year 2001 Description: - 16 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahlfolder KD 66.1/4 - Parallel fold unit with 4 buckle plates: 66cm - Perforating shaft Bodsykz Sbspfx Aaasda - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Heidelberg Stahlfolder - Stream delivery

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Bdsdpfx Aastyyvwsaea Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Bedpfsx Ndu Dex Aaajda Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-33 Bedpfsxybdhjx Aaaeda Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: good (used), Year of construction: 2002, Buckle Folding Machine - Fi-52 flat pile feeder with TREMAT - 1st folding station, 52 cm, with 4 folding pockets, partially motorized adjustment - Glue system with ACC-2.4 control unit - 2nd folding station, 52 cm, with 4 folding pockets, partially motorized adjustment - Downstream knife shafts in both folding units - Central control panel DCT-500 - SBP-46, No. 117702/98, year 1998, delivery stacker with press station and marking unit Bjdpfxjx R Tlho Aaaoda - Compressor

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Bodpfjypat Iex Aaaeda Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: good (used), Year of construction: 2001, Label size max.: 250 x 250 mm / min.: 10 x 45 mm Pile height: 0 – 40 mm Maximum sheet thickness: 2.5 mm Speed: 60 cuts/min Output: up to 400,000 pcs/h Positioning accuracy (head): 0.02 mm Die adjustment: 2 – 3 ° Bedeyt Nvaepfx Aaajda Press force: 78,000 N Power consumption: 5.7 kW Current consumption: 12 A (380V, 50Hz) Working area: 960 x 2,900 mm Weight: 1,250 kg Equipment - Semi-automatic label die-cutting machine - Hydraulic operation - Die-cutting of labels from pre-cut material strips - The label stack is fixed in place by a clamping device and fed horizontally into the die-cutting head - The stack is vertically die-cut using a form die installed in the cutting head - Die-cut labels are transported upwards by the tool and removed by the operator - Separate control panel with 2-button safety interlock - Technical documentation included

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold Bdsdpfx Aaeyi Udusaoa - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Bdedpfeyi Ub Tox Aaaea Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL - Glue unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Bdsdpswbp Nwjfx Aaasa Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Bdodpjfi Tg Hjfx Aaasa Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30