Used Pipe Bending Machine for sale (65,971)

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers Gkedpfx Aksxab Tcshsd - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. Gsdpjxabuyjfx Akhjkd dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz Gedpfx Akopu R Nvohekd - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg Gedpfxoz H Nzfo Akhokd

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Gsdozulzgspfx Akhjkd Type: 2H B Zonder gereedschap

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. Gkedpfxsz It Sko Akhjd A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Gksdpfx Aowwqvwokhod

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V Gkjdpfsxacdvex Akhsd total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, – Bending capacity 26 mm – Automatic and manual operation – 3 programmable bending cycles – Foot pedal operation – Hardened bending tools – Emergency stop switch – Documentation – 400 V Gsdpfj Akfxdex Akhskd

Condition: good (used), functionality: fully functional, Year of construction: 2005, SIMASV CHV - Type 3360 Gkjdpfx Ako Ahrdiehsd Notching Machine - *Brand:* SIMASV SRL - Thiene (VI) Italy - *Model:* CHV - *Type:* 3360 - *Serial Number:* HV3360 / 1575 - *Year:* 2005 - *Power:* 3 kW - *Power Supply:* 400V / 50Hz - *CE Marking:* Yes The 3360 version from SIMASV features: - *Shafts Ø 60 mm* (hence the 60) - *Rollers Ø 155-160 mm* - *3 motorized rollers* - *2 hydraulically controlled side guide rollers* (the 2 arms on the sides) - *Capacity:* Tube Ø 60x3 mm / Flat bar 100x15 / Angle iron 60x60x6 / I-beam 80 approximately – it is a small/medium-sized machine - *Weight:* ~ 600-700 kg - *Control:* Foot pedal, digital display of stroke length, hydraulic descent.

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device Gsdpsxabfljfx Akhjkd - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: Gjdjtr U Hlepfx Akhekd → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, – Bending capacity: 42 mm – Automatic and manual operation Gksdpfo Akfxlsx Akhjd – 3 programmable bending sequences – Foot pedal operation – Hardened bending tools – Emergency stop switch – Documentation – 400V

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Gedpoyr H A Ijfx Akhokd Inspection and demonstration possible by appointment.

Condition: new, sheet width 2600 mm plate thickness 10,0 mm pre-bending 8,0 mm diameter of upper rolls 230 mm side roll diameter 190 mm diameter of lower rolls 210 mm total power requirement 7,5 kW weight of the machine ca. 5.560 kg. range L-W-H 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Gsdoxaalqjpfx Akhokd - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Gksdpfx Aksz D Suvehjd Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: new, number of rollers: 3, shaft diameter: 50 mm, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control Gkjdpfx Aksr Ar Hvehsd - Emergency stop - Documentation - 400 V

Condition: good (used), Year of construction: 2005, Technical data: Min. bending capacity steel: ø 19.8 x 3.0 mm Max. bending capacity steel: ø 76.1 x 3.0 mm Max. bending capacity stainless steel: 76.1 x 1.65 mm Bending radius: max. 150 mm Bending angle: max. 190° Bending direction: clockwise (right) Max. tube length: 6000 mm Adjustable control panel CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1650 mm Gedo Ahr T Ropfx Akhekd Weight: approx. 3 tons Accessories: Tools D 20 R 40 D 30 R 75 D 25 R 50 D 16 R 40 Condition: Very good condition, little used The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2009, 30 mm 30 mm Gsdpov Skzdjfx Akhekd L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: good (used), Press brake with a working length of up to 6.2 m Suitable for sheet metal up to 1.25 mm thickness With rear manual back gauge Gksdpfxs Afw U Rj Akhod With roller cutter With Knauf profile head

Condition: new, Year of construction: 2026, working width: 4,200 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness copper (max.): 1 mm, back gauge: 1,320 mm, overall weight: 1,000 kg, total length: 4,500 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, foot remote control, Electric press brake RED-4200/0.8/150* with foot pedal and backstop. New electric precision sheet metal bending machine for 0.8 mm steel and 1 mm aluminum sheets. The main features of this sheet metal processing machine are its efficiency and precision. The bending machine enables bending operations with a maximum angle of 150 degrees. Electric control: A user-friendly control panel increases ease of use and the precision of repeatable bends. Roller shear: Enables cutting across the entire working width. Robust construction: The 18 mm thick bending beam ensures durability, while the 80 mm opening and the three-stage stroke adjustment of the upper beam facilitate material positioning. Machine equipment: electric control: upper and lower beam Foot pedal for control Electric backstop up to 1320 mm Gsdoc I T Rxepfx Akhokd Control panel Additional equipment: Roller shear up to 1 mm steel sheet / 1.5 mm aluminum - 500 euros Manual folding machine - 100 euros Magnetic alignment aid, 2 pcs, 36 cm - 100 euros Shipping throughout Germany: 500 euros Invoice will be issued without VAT as an intra-community supply.

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Godpfx Aowmdw Hekhokd Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Price excluding VAT

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm Gedpfxoz A S Sre Akhekd -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Gsdpfx Aju Ibvuekhekd Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: Gksdpfx Akoz Dxpmehsd •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...