Used Pipe Machining Center for sale (71,857)

Condition: used, Year of construction: 2011, operating hours: 26,476 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Ndedpsz Dku Usfx Aazjb Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, Year of manufacture: 2010, Ndodpfx Ajz Dgr Neazsb Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1300/600/700 mm, Spindle speed up to 12,000 rpm, Tool holder: HSK 63 - A, Electric handwheel, Coolant pressure: 20 bar, Paper band filter, Coolant capacity: 80 liters, Full enclosure for the working area, Direct measuring systems, Chip conveyor, Bellows with steel lamellae, 3D measuring probe, Laser measuring device.

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. Nsdsz Dbyhopfx Aazodb The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: used, Year of construction: 2015, control SIEMENS - 840 D - - - - - - - - - - - - - - - - - - 5-axis simultaneous machining center | SPINNER - U 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. Ndsdpfx Asz Dxrzsazeb The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U620| U-620

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur - Windows 10 operating system - Werklengte 7,6m Ndjdpfxoz Eqpne Aazjb - Lengtemeetsysteem profielen - Barcodescanner - Toolset Machine is werkend te zien, demontage door koper. Per direct beschikbaar.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,982 h, functionality: fully functional, Haas VF-8/40, year of manufacture 2008 The machine was purchased in 2008, is fully functional, and can still be used as normal. All tools and accessories are included. Further technical details can be found in the attached images. Viewings can be arranged by appointment if interested. Ndodpfxsxcvz He Aazeb

Condition: used, Year of construction: 1995, travel distance X-axis: 585 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 554 mm, overall weight: 3,500 kg, Heidenhain TNC 355 BT40 spindle 18-tool changer travels 585X406X554MM Nodsylh Nvjpfx Aazsdb weight 3500KG

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 Ndsdpfezvf Susx Aazeb - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm - The pallets are clamped onto the rotary table Nsdpey Tvcujfx Aazedb - Tool holder: HSK-E 40 - For further technical data, see the images - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Nodpfx Aozu Nyaoazjdb Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Ndsdpfxezzbcyo Aazob Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Ndedsz Dttgepfx Aazsb Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Ndodpfxsz A A E No Aazsb Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 9,000 rpm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, Deckel Maho DMU 50 T – CNC Universal Milling Machine (Year of manufacture: 1996) For sale is a well-maintained and fully functional CNC universal milling machine, the Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, and for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel ranges: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling rotary table for flexible 5-axis machining Ndedpfx Aaez D Ab Tozeb Spindle: SK40, up to 9,000 rpm Equipment: Full enclosure with sliding doors and ergonomic control panel Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: Dismantling, removal from the building, loading, and transport must be completely organized and carried out by the buyer (at their own expense and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on-site by appointment.

Condition: used, Year of construction: 2010, Haas VF3 CNC Vertical Machining Centre with Haas Control. S/No. 1081025 (11/2010), Table size 1220mm x 470mm, 20 Tool ATC, BT40 Spindle Taper, Swarf Argur. Nodpfx Aszwn Inoazsdb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Ndedpfxez Dp Dbs Aazjb Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC machining center Hedelius Forte 65 Single 1320 Control system: Heidenhain TNC 640 Year of manufacture: 2019 Availability: in transit Internal machine number: 74 Travel distances: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area: 1,500 x 650 mm Table load: approx. 1,200 kg Tool holder: HSK 63 Nsdpfszzmirsx Aazedb Tool magazine: 65 positions Spindle speed: 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system, 900 l - Internal cooling lubricant system, 25 bar - Chip conveyor - 1x flushing gun - Electronic handwheel

Condition: good (used), Year of construction: 2019, Universal machining center Machine type: Hedelius Acura 65 Control: Heidenhain TNC 640 Year: 2019 Available after: Dezember 2026 SPECIFICATIONS 5-axis-simultaneous X-Axis: 700 mm Y-Axis: 650 / 465 mm Z-Axis: 600 mm Rapid motion: (X/Y/Z): 40/40/40 m/min. B-Axes: +30° / -115° Spindle speeds: 12.000 rpm Spindle power: 22 kW Torque: 117 Nm Tool: SK 40 Tool capacity: 65 Table size: D: 650 x 540 mm mm Max. Table Load: 500 kg Equipment Chip conveyor 3D-Touch probe: M&H Internal cooling: 25 bar Njdpfx Aaez D Aq Uezjdb Cooling tank: 500 l Electronical handwheel: HR 510 Oil mist separator Chip rinsing pistol Kinematikset 3D-Formenbauabstimmung Documentation - German

Condition: used, Year of construction: 2013, power: 9.5 kW (12.92 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,250 mm, number of axes: 3, actuation type: electric, total height: 2,244 mm, total length: 5,240 mm, total width: 2,500 mm, overall weight: 2,700 kg, Equipment: CE marking, We offer this used SCM TECH Z1 machining centre, year of manufacture 2013. Type designation: FORA-FRESATRICE CN Manufacturer: SCM Serial number: AA1/017424 Type: TECH Z1 Model: TECH Z1 Year of manufacture: 2013 Weight: 2,700 kg Rated voltage: 400 V Rated current: 31 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require further information, please feel free to send us a message or call us. Ndodpfeyvpp Hox Aazsb

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Ndjdpfx Aszz Hn Ieazjb Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Nodpfxjz Dgzdo Aazodb Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Travel distances: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Swinging operation: 2 x 1,000 mm Total clamping area: 2 x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Ndjdpfxszzl Ugj Aazob Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system 900 l - Chip conveyor - 2 x flushing guns - Electronic handwheel - Partition wall prepared - High-pressure pump 60 bar - 0-point clamping plates - Vises and tools as required - Prepared for work area partition

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Nodpsywicvjfx Aazodb

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems Nodpfxjz A Ap Ie Aazsdb - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of Ndjdpfezz S R Uex Aazsb delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!