Used Planer Head for sale (10,143)

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT. Ijdpex D Dihjfx Apnsib

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) Iiedpjh U Nvksfx Apnsb MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Direct from UK factory where it was filling water based solutions into bottles. Single head version also available. Iiedpfx Apeyzcv Donob

Condition: used, Year of construction: 1987, machine/vehicle number: 8748, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: manual, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, overall weight: 745 kg, SAC surface planer FS 430, max. planing width 430 mm, table length 2,900 mm, infeed table 1,550 mm, outfeed table 1,310 mm, segmented cutterhead 430 x 35 x 3 mm, planer fence 1,300 x 160 mm, tiltable 0 - 45°, motor 3 kW (4 HP), weight approx. 745 kg, as inspected, ex location Seevetal, without transport, subject to prior sale. Iijdpfoy Slzqsx Apneb

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,360 mm Ijdey Sxkropfx Apnjib Travel Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 20 m/min Rapid traverse Z-axis: 20 m/min Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Year of initial commissioning: 1999 Control: Heidenhain TNC430 PA Clamping table L x W x H: 4,500 x 2,000 x 400 mm Longitudinal T-slots: 18H12 T-slot spacing: 250 mm Spindle power: 18 kW Power supply type: Three-phase current Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Pre-fuse: 63 A Machine footprint without control cabinet: 6,000 x 3,500 mm Required height: 4,050 mm Total weight: 15,000 kg EQUIPMENT Stepless spindle speed adjustment Tool changer TT140 measuring probe

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 3.8009, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 3,500 mm, feed length Z-axis: 12,500 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, distance between stands: 2,500 mm, type of input current: AC, spindle motor power: 63,000 W, The machine was originally manufactured in collaboration between Waldrich Coburg and Waldrich Siegen as a heavy-duty CNC portal milling machine for industrial large-part and heavy-duty machining applications. 63 kW milling and drilling unit NC universal milling head B-axis and C-axis Automatic tool changer 60-position tool magazine ISO50 / SK50 Internal coolant system Enclosed work area Heavy-duty industrial design Electronic handwheel Siemens Sinumerik 840D Heavy-duty CNC portal milling machine from Waldrich Siegen for the machining of large and heavy workpieces. The machine comes from an ongoing industrial project / factory closure and is already disassembled or prepared for transport. Particularly interesting for: Heavy-duty machining Large-part machining Machine and plant engineering Steel construction Tool and mold making Important note: Due to an urgent factory clearance, the machine must be picked up from Rüsselsheim no later than the end / mid-June. This makes a very attractive special price possible. Sale from location. Subject to prior sale and errors. Ijdpfoy Sywgsx Apnsib

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Iisdpfxjxm R Uvs Apnjb Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Ijdoy Dpmujpfx Apnsib Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, Year of construction: 1998, x-travel 9000 mm y-travel 4350 mm z-travel 1250 mm Control Siemens 840D table-size 3500x2000 mm workpiece weight - double table 40 to workpiece weight - single table 20 to feeds x-axis 1-10000 mm/min rapid motion - x-axis 30000 mm/min feeds y-axis 1-10000 mm/min rapid traverse y-axis 30000 mm/min feeds z-axis 1-10000 mm/min rapid travel z-direction 20000 mm/min milling and drilling device M3-63KW / FW1250 max. torque on the milling spindle 3300 Nm power capacity - milling spindle 63 kW turning speed - milling spindle 5000 U/min c-axis 360 Grad positive location each C-Achse 0,001 von 0-360 G Grad tool taper Iso 50 numbers of tools in magazin 60 weight of tools max. 50 kg diameter of tools max. 360 mm tool length - max. 600 mm angular milling head HSD 70 C 650 M3 angular milling head - universal GSC 120 C 450 M3 vertical spindle unit VS 36 C 650 M3 vertical spindle unit VS 330 C distance between columns 2500 mm Ijdpfjy E Tvpjx Apnsib weight of the machine ca. 140 t dimensions of the machine ca. 22x11x6 m

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1x Pfauter PE150 milling head, serial number 27364 Iedey N Df Ajpfx Apnsib 1x Pfauter P210L milling head, serial number 29013 Both milling heads are brand new and unused. Available for immediate delivery.

Condition: good (used), Optical dividing head, precision dividing head Iodjb A Iqbjpfx Apnoib -Max. tip height: 76 mm -Max. center distance: 200 mm -with collets: 3, 4, 5, 6, 7, 8, 9, 10, 16 mm -wooden box -Total weight per box: 42 kg Quantity: 1 piece available

Condition: new, Year of construction: 2026, functionality: fully functional, KRAFT FB-15/20/25/30 Facing Lathe – Factory New · 1,500–3,000 mm Face Plate · CNC or Conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES UP TO 2 TONS (OVERHUNG) The KRAFT FB Series is designed for cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four models cover swing diameters from 1,500 to 3,000 mm and permit overhung workpiece weights up to 2 tons, ideal for single-part and medium batch production. Available as conventional or CNC models (Siemens, Fanuc, or Fagor), with or without tailstock, and with longitudinal or cross beds. KEY FEATURES Heavy-Duty Construction - Machine bed cast in one piece from MEHANITE, bed width 450 mm, heavily ribbed - Hardened and stress-relieved bed slideways - Ensures durable, highly precise machining without deformation High-Precision Main Spindle — G1 Accuracy Class - Induction hardened, spindle bore up to 230 mm (option) - Compact spindle housing, widely ribbed for stability Powerful Drive - Spindle motor 22 kW (29 kW option), up to 600 rpm, high torque - Infinitely variable spindle speed as standard CNC-Ready Ex Works - X/Z servomotors by Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Overhung Workpiece Machining — The Facing Lathe Advantage - Workpieces are clamped directly on the spindle head, no tailstock required - Optimized for flat, disc-shaped components with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · Constant cutting speed · PARAT toolholder · C-axis & driven tools/milling unit · Tailstock · Spindle bore Ø 230 mm · 29 kW spindle motor MACHINE DATA — FOUR MODELS KRAFT FB-15 - Swing diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, Dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, Dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, Dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm Iiedsc Txdhopfx Apneb - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, Dimensions: 3000 × 3200 × 3350 mm COMMON SPECS FOR ALL SIZES Turning length: 330 mm · Max. workpiece length: 450 mm · Bed width: 450 mm · Overhung workpiece weight: max. 3,000 kg · Cross slide width: 250 mm · X travel: 330 mm · Spindle bore: 155 mm (230 mm opt.) · Spindle nose: A2-11 (A2-15 opt.) · Spindle taper: MT7 · 4 spindle speed ranges · Spindle motor: 22 kW (29 kW opt.) · Rapid traverse (X/Z): 6/8 m/min · 4-position tool turret, tool shank 32 × 32 mm CUSTOMIZED TO YOUR REQUIREMENTS Tell us your specific application — workpiece range, required accuracy, preferred CNC system — and we will configure the FB Series to your needs. Attractive leasing and hire-purchase conditions through our partners. Delivery including installation, commissioning, and operator training available on request.

Year of construction: 1990, condition: ready for operation (used), Haul length: 1155-3500mm, blank width: 530-2400mm, creasing height: 300-2400mm, creasing length: 410-1600mm, creasing width: 150-1340mm, flap width: 35-50mm, max. format: 7000x2400mm, folded: 3500x2400mm, connected load: 20kVA, length: 15,000mm, width: 8000mm, height: 5000mm, with documentation. An inspection on site is possible. Iiodpfxjy Sv S Tj Apneb

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Features:Included cap sorting as-is Iedpjg Dvfwofx Apnsib or adjusted to customer needs

Condition: like new (used), Can seamer Make: IMC Type: Automatic 1-head can seamer Model: 578 Capacity: 3000 up to 3500 cph depending on can-size, product and circumstances. Range: 54-99mm tin cans height 56 up to 140 mm. (Optionally up to 175 mm.) Direction: Left-right Frame: Mild steel, paint-coated RAL9006 (Stainless Steel-grey) Dimensions: l x w x h = 1400 x 1200 x 2100mm Weight: 800Kg Power-supply: 3x380V+N+E, 2Kw Tooling: Machine equipped with Tooling for 1 size tin-can with classic or EOE steel lids up to your specifications Features: In-feed positioning disc Lid dispenser Lid sensor Mechanical lid separation system Mechanical clutch as-is Iiedjiba Uhjpfx Apneb or set to customer needs

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Iiodpfx Apoy Si Afjnsb Features and technical data: - Planing width: 520 mm - Heavy cast iron tables - Sound insulated - TERSA cutterhead with 4 knives - Pneumatic quick-change system - Motorized thicknessing table lift with LED digital display - Swivelling aluminium auxiliary fence - Pneumatically controlled cutterhead guard - Foldable safety cover - Combined extraction hood for both planing types D=100 mm - Pneumatic service unit - CE mark Availability: short-term Stock location: 63934 Röllbach

Condition: used, Year of construction: 1968, Used machine Year of manufacture: 1968 Features and technical data: Isdoy Ih Swjpfx Apnjib Planing width: 630 mm Planing height: 220 mm Speed of 4-knife cutterhead: 5,500 rpm Motor power: 6 HP Feed rate: 7/14 and 9/18 m/min Weight: 1,150 kg Due to the missing motor brake, the machine can only be sold as a parts donor! Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered – bottom: adjustable rollers in lower table: 2 pcs motor: 7kW Iijdpfxoy S Af To Apneb variable feed speed control Dimensions (LxWxH): 1800x1250x1150mm weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control – Used thickness planer in very good condition Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: excellent (used), Catalogue number 7303 TECHNICAL DATA - Cutterhead width: 640 mm - Number of knives: 3 pcs - Max. thickness of workpiece: 250 mm From above: - Pawls - Toothed, feed-in roller Iijdpfx Aoy S Ad Aspnjb - Hold-downs - Planing shaft - Hold-downs - Smooth, feed-out roller From below: - Adjustable rollers on lower table: 2 pcs - Motor: 7.5 kW - Electric table lift - Lift motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Extraction port diameter: 140 mm - Dimensions (L/W/H): 1120x1250x1680 mm - Weight: 1033 kg – Made in Poland – Used thickness planer, very good condition Original photos Net price: 21,900 PLN Net price: 5,200 EUR (conversion rate 4.2 EUR) (Prices may change due to exchange rate fluctuations)

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Spindle mount: MT 3 Swiveling range: +110 / -20° Iiedpfx Aeyv Dy Tjpneb Weight: 33 kg

Condition: used, Used machine Equipment and technical specifications: - 4-knife planer shaft - Feed speed: 7.5/15 m/min - Surface planer: - Working width: 500 mm - Total table length: 2,200 mm Iisdpjy R E U Ijfx Apnob - Motor: 4 kW - Thickness planer: - Minimum working height: 3 mm - Maximum working height: 235 mm - Max. depth of cut: 8 mm - Digital height adjustment display with decimal precision Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - Planing width: 410 mm - 4-knife shaft - Motor power: 3 kW - Shaft speed: 5,000 rpm - Shaft diameter: 120 mm - Feed speed: 8 + 14 m/min - Maximum planing height: 230 mm - Extraction port: Ø 150 mm - Surface table: two-piece, foldable, synchronized on both sides Isdpoy R E Uzefx Apnoib - Fence: tiltable, angle with magnifying display - Table height adjustment: via double universal joints, handwheel with scale display - Thickness planer: with outfeed roller, spring-mounted, feed rollers driven synchronously Dimensions: 2,040 × 1,180 mm Weight: 560 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Iiedpfxsyazywj Apnsb Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. Iisdpfox Hyt Rsx Apneb The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Model: IV2-G500CA Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Connection via Keyence IV2 connection cable (not included) Scope of delivery: 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.

Condition: excellent (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, faceplate Iisdpfx Ajrzvwwspnob -Manufacturer: Schmid, Plan and boring head -Type: UBS Gr.1 -Recording: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos -Case dimensions: 240/125/H100 mm Total weight: 4.0 kg