8
- Machine frame
1 Monobloc base frame made of heavy steel.
- The machine frame is made of high-grade steel and is very heavily constructed by, among other things, the application of various sketch plates and reinforcement ribs.
2 The infeed table made of special ground steel length 2500 mm.
- Input table of steel ground length 2500 mm.
- Worktable Herdox HB 400
- Grooved V-belts on all spindles
- Separate motors for each spindle
Bmblmsyhyo
- Electromotive high/low adjustment incl. feed rollers a...
12
Four-sided planer
Weinig u 17 A.
Year of construction 1980
Machine number 1192-994
Below: 5.5kW
Right: 4kw
Left: 5.5 kw
Right 4kw
Above 7.5 kw
Bp3gj8fwkn
Below 5.5 kw
5
- Working height (table height) 885 mmᐳ constant <
U7p2e9yoq
- front table for adjustable undervoltage setting
- Machine frame in heavy welded construction with removable tops
- Electronic width adjustment
You as a customer can choose in which state the machine should be delivered
10
Working width 600 mm
Working height 250 mm
Working height 4-side 250 mm
Number of cutterheads 4 (option: 5th bottom spindle 11 kW)
Spindle configuration b-t-r+l
Spindle diameters X-X-40-40 mm
Jbfp0jvhs
Motor power 11-15-11-11 kW
Working width adjustments manual
Working height adjustments motorized
Feed speed 30 m/min
Feed motor 4 kW
Driven bed rollers 3
Infeed rollers 4
Outfeed rollers 2
Constant table height 800 mm
Champfering spindles 2 x 1,85 kW
Voltage 400V 50Hz 3Ph.
Weight ca. 4500 kg
3
planing width 50cm, planing height 16cm
G0tefnf
5
very nice 4-sided planer weinig quatromat 18 in very good condition and in compliance with standards
Oew9p
6
Setting of heads:
Down/Right/Left/Right/Right/Left/Up/Up/Down/Universal
-Hydro drive
-Smooth feeding system from 0 to 65 meters per minute
-Drive system rollers in bottom table: 9 pieces
-Diameter of heads - 50mm
- 2 Vertical heads equiped in additional head adjustment system (allows to set the head in any angle)
-Machine equiped in Hydro heads.
-Machine in great condition, still working in our factory. It's a rare machine as ussualy weinig planner has maximum 8 heads. Thanks to 10 heads you ca...
6
Upper and Lower Hydraulic Advancement Group.
Electric command board.
Working range 330 mm
Feed speed 0/100 m / min approx.
Maximum height 130 mm
Bdudwmfh89
Maximum width 330 mm
6
- Planing width max 310 mm
- planing height 2-sided 300 mm (4-sided 140 mm)
- floating vertical level
- suitable for the jointing line, below 22 kW,
- above 30 kW, right 11 kW, left 11 kW
- warranty 12 months
You as a customer can choose in which state the machine should be delivered
U7p8elqw0
3
Working width 860 mm
Working height 310 mm
Working height 4-side 210 mm
Number of spindles 4
Spindle configuration b-t-r+l
Spindle diameters 50 mm
Spindle rotation speed 4500 U/min
Outboard bearings for spindle 1-2
Motor power 22-22-7,5-11 kW
Working width adjustments motorized
Working height adjustments motorized
Feed speed 6 - 30 m/min
Feed motor 5,5 kW
Feed-system Cardan
Constant table height 940 - 950
Chip removal bottom 10 mm
Chip removal top 16 mm
Chip removal right 20
Chip removal left 20...
8
очень хорошо подходит для производства сруба
JUST A FEW WEEKS WORKED !!!
Wide planer / Wide moulder
Working width 1100 mm
Working height 310 mm
Working height 4-side 210 mm /option 300 mm
Number of spindles 4 / option +2
Spindle configuration b-t-r+l / option + r+l
Spindle diameters 50 mm
Spindle rotation speed 4500 U/min
Outboard bearings for spindle 1-2
Motor power 18.5-22-7,5-11 kW
Working width adjustments motorized
Working height adjustments motorized
Feed speed 7 - 40 m/min
Feed ...
6
-max 510 x 310 mm
-power 115 kW, 30 kW below / above 37 kW / 18 kW right / left 18 kW / chamfer 2 +2 /
feed 7.5 kW
-4-sided 510 x 300 mm
-constant table
Bcavuzs
-PST control for wide and height
-!machine equipped with plenty of accessor
You as a customer can choose in which state the machine should be delivered
11
Four-sided planer Leadermac Compact 423 Spindle power 4 working width min/max - 20-230 mm working height min/max - 8-125 mm spindle diameter 40 m spindle rotation speed 6000 rpm/ top clamps and side pneumatic cablighting table introducing a length of 2000 mm year manufactured 1999 two electrically controlled axes with digital feed display adjustable feed motor with power 2.2 kw spindle system/power1. Lower, power 5.5 kw2/3 left/right, power 7.5 kw4 upper, power 5.5 suction quickeys 4 x 125 mm ma...
9
Thickness planer STETON type S 530I
is optically and technically in a very good, as good as new condition, the machine comes from a small carpenter's workshop with 2 people and has only been standing the last years, because the former owner has not found a successor for his company, it has only been used very little, everything is in original condition, the machine has only been cleaned, nothing has been done on the varnish
everything works perfectly
with backstroke safety device
the planing kni...
11
Gubisch 4-side planer
Machine number: 6730
Year of manufacture: 1989
Voltage: 380 V, 50 Hz
weight: 4200 kg
power input: 34 kW
length of infeed table: 2 m
Feed rollers diameter: 140 mm
Ylsgeapz
Suction nozzle diameter: 140 mm
Very good condition!
1
Technical characteristics
Crxaai3g
Number of tools: 4 Power and Motors
Overall dimensions
9
Lama machine
G0syft7
2
4 head
full spindle adjustment
U9ifwixl
heads included
11
WEINIG UNIMAT SUPER 4 planer
- machine in stock
- after the technical review
- German production
- year of production 2006
- specialized machine for planing wood for gluing
TECHNICAL SPECIFICATIONS:
- planing width 150 mm
- planing height 50 mm
- diameter of the spindles 40 mm
- equipped with tools
- the first lower head 11 kW 6000 U / min
- second upper head 22 kW 7000 U / min
- the third lower head 5.5 kW 6000 U / min
- 2.2 kW feed motor
2siati
- adjustable feed on the inverter
- feed on car...
9
thickness planer KÖLLE type DH 63 630mm
very good condition
everything works fine
with backstroke safety device
with 4 strip planing knives, which can be changed quickly, easily and accurately, you get a setting gauge with it (is not shown on the pictures)
the chips can be removed very well by the closed system
the thicknessing table is tilt- and torsion-proof mounted on 2 trapezoidal spindles
with protective hood, which can be folded upwards
max. planing width 630mm, max. planing height 230mm
t...
9
MAIN FEATURES :
Fixed table machine. Upper part mounted and adjustable on 4 large cylindrical columns.
Capabilities:
- Finished wood width: 38 to 450 mm
- Finished wood height: 12 to 200 mm
Composition:
1 - Lower shaft, power 7.5 KW (10CV)
2 - Upper shaft, power 11 KW (15CV)
3 - Right spindle moulder, power 7.5 KW (10CV)
4 - Left spindle moulder, power 7.5 KW (10CV)
Feeding :
- Metal rollers driven by chains
- Speed variator from 4 to 24 m/min with potentiometer on the console
Settings:
...
7
Technical characteristics
Ofezb
Inferior planerLeft routerRight routerInferior planerSuperior planerPneumatical pressure
capacité 320 mm x 160 mm
table d’entrée 2000 mm
raboteur inférieur et supérieur à contre palier
porte-outil Ø 120
entrainement dans la table
dégau 9.2 kW
toupie 8.6 kW
toupie 8.6 kW
rabot 9.2 kW
affichage compteur SIKO
Number of tools: 5 Shaft diameter: 50 mm Power and Motors
Power: 11 Kw Overall dimensi...
2
surface planer make SAC type FS 430 HP 4
Masch.# 102g.05.84 Year of construction 1984
Technical data:
dressing width 430 mm
Knife of the four-blade shaft 430 x 35 x 3.0 mm
max. fold depth 20 mm
Table length 2900 mm
table length 1550 mm
delivery table length 1310 mm
Table width 430 mm
Diameter of the knife shaft 120 mm
Blade shaft speed 4500 rpm.
Table height 800 mm
Dressing fence 1300 x 160 mm
Stop inclination 0 - 45
Drive power 4,0 PS
Weight approx. 745 kg
Outer dimensions approx. 2900 x 700 x ...
6
Technical data:
- Planing width - 500 mm
- planing height - 180 mm
- Back distance - 440 mm
- blade shank diameter - 125 mm
- electrically lifted table
Hvyexystw
- feed speed - 3-20 m / min
- lower shaft power - 5.5 HP
- power of the upper shaft - 7,5 HP
- the power of the right head - 5.5 HP
- Power of the left head - 5.5 HP
14
Weinig Unimat Super 4 planer
Simultaneous horizontal and vertical milling with combined tools
Specially for processing lamellas for massive wooden panels,
Provides parallelism and an accurate 90 degree angle
entry table with a length of 1950 mm
Feed rate adjustable 6-24m/min
working width min/max: 25/150 mm
Working height min/max: 15/50 mm
Bjvtbr0krw
total power 40 KW
spindle 1: engine power 11 kw (6000RPM)
spindle 2: upper engine power 18.5 kw (7000 RPM)
spindle 3. lower engine power 5.5 kw (60...
7
VEMA AHM 52 surface planer
is optically and technically in a very good condition, the machine comes from a small carpenter's workshop with 2 people, everything is in original condition, the machine was only cleaned, nothing was repaired on the varnish
all guides and bearings are OK, the machine works perfectly
with exhaust 140mm
max. planing width 520mm
the chips can be removed very well
with 4 cutterblock for normal strip planing knives
the planing knives can be adjusted easily and very exactly...
10
Four side planer 4PM 180/4
- after the technical review
- very good condition
Bkr099xzo2
- DTR documentation
- year of production 2006
TECHNICAL PARAMETERS:
working width 180 mm
working height 120 mm
spindle diameter 40 mm
5.5 kW lower horizontal spindle
right and left 7.5 kW vertical spindle
upper spindle 5.5 kW
1.1 kW feed motor
spindle speed 6000 RPM
the top four steel pull rollers
one top rubber pull roller
two kinds of feed speed 6 and 12
length of the feeding table 170 cm
diameter of...
1
SECOND-HAND PIT HYDRAULIC CLAMP COMEC MOD. FS R 4+2
- Hydraulic pump power HP 5.5 (kW 4.0)
- Cylinders ø 60x150 mm
- Inclination of the locking planes in:
* vertical ±10°
* horizontal ±20°
- Working dimensions mm 520x600
- Dimensions FS R 4+2 mm 1700x1700x1300 H
- Weight kg 1200
- volt. 400/50
- s/n 060109
Bg0vzlhnt2
- CE rules year 2006
- Kw 11.1
- matr. 543
- CE rules (year 1997)
5
Working width - 45
Working height - 30
5 heads
Very good condition
Nuja2
11
heavy duty planer with turning ring and height adjustable indeed and outfield roller tables
working width 30 - 2100 mm
working height ca. 13 - 300 mm
2 top and 2 bottom horizontal planing shafts, inclined,
the left 2 shafts with 4 knifes, the right 2 shafts with 6 knifes
horizontal spindle bottom 2 x 18,5 kW
horizontal spindle top 2 x 22 kW
vertical spindle right 7,5 kW
vertical spindle left 7,5 kW
motor table height adjustment 3,0 kW
feed speed variabel up to approx. 4 - 24 m/ min
total el...
8
4 Spindels
Bfndtiehg9
Workingwidth 140 mm
Tools included
8
Technical characteristics
Bp3uuthiwq
Entry table length: 2500 mm Number of tools: 6 dont un universel Maximum advance speed: 5 à 25 m/min Power and Motors
Overall dimensions
1
4-sided planer, make Sueri Alfredo, type SAC H4-180, year 1989, glass pane defective, 1 suction hose torn
Bqb3lwoo7j
12
Four-seater Guilliet, few operating hours
Description
max wood cross section 220 x 120 mm
min wood cross section 20 x 6 mm
Length of the infeed table 2000 mm
Speed of the tool carrier 6000 rpm
Feeding speeds: 6 and 12 m / min
Drive of the vertical spindles 5,5 KW
drive 3 x 3,7kW / 1 x 5,5 KW
feed 0,55 kW and 1,1 KW
Pjrx7hsv
suction connection 3 x D=160 mm / 1 x D=120 mm
Data taken from data sheet, therefore without guarantee
3
number of spindles 5
Working width 220 mm
Tnhqflu
6
Working width max mm 180
Working height max mm 120
Number of spindles 4
Table length mm 2500
Seperate motor per spindle
Further technical details
Working width min mm 30
Working height min mm 10
Workpiece length min mm 340
Bonwwc870z
Main motor power kW 5.5
Feedrate max m/min 24
Continuously variable feed
Motoric adjustment Planing height
CE marking
4- Side planer with acoustic hood
max. planing width 220 mm
max. planing height 120 mm
with planing heads
good condition
Bpmtqdwmuw
6
Technical characteristics
Number of tools: 6 Power and Motors
2saeuy
Overall dimensions
15
Extremely powerful and massive machinery
Exceptional condition, flawless machine
Machinery owned as a first time buyer
Perfect silent cab
Top planing and chamfering
Power 58 Kw
Working width min-max = 60 - 450 mm
Work thickness min - max = 15 - 310 mm
Feeding speed 5 - 30 m/min
P=11 Kw on 1st lower shaft
Opjal
P=15 Kw on 2nd upper shaft
P=11 Kw on 3rd right vertical shaft
P=15 Kw on the 4th left vertical shaft
Machine with upper chamfering
4
4 - side Thicknessing and planing machine with
side heads.
Max working width 760 mm
Max working height 200 mm
Mvbmwc
Feeding speed up to 23 m/min
2
Type: PLANOMAT 22E
B9i7nvhk
Year of production: 2001
Weight: 1400 kg
Power: 20 kW
Planing height: 120 mm
Planing width: 220 mm
Machine dimensions:
- machine length 3850 mm
- machine width 1600 mm
- machine height 1850 mm
Moulder 4 sided
Brand:Weinig
Type:Unimat 23
No:023-2103
Year:1996
infeeder
Brand:Weinig
Type: EM4
4 sided moulder Weinig with 6 working spindles. Together with the machine it´s included
an infeeder Weinig EM 4.
Techn nfo:
Planing capacity 230x120mm
Table with note track (to process short pieces)
Working spindles:
Bottom, right, left,right,top,bottom.
Spindle diameter 40 mm
Cardan driven feeding
Feeding rollers with prneumatic pressure
Adjustbale feeding speed from control panel.
Bmnwlfacfw
Aut...
4
Four-sided planer Weinig Unimat 23E
number of spindles 6
spindle arrangement: Bottom/right/left/right/up/down
riffled table
ATS positioning system
I32jf9ej0
total power 46 kw
availability in the near future
7
Technical characteristics
Inferior planerLeft routerRight routerInferior planerSuperior planerAutomatic lubrication
Capacité 20 – 230mm x Ht 160mm maxi
1 toupie droite 8000 tr/mn
1 toupie gauche 8000 tr/mn
1 raboteur supérieur 8000 tr/mn
1 raboteur supérieur 8000 tr/mn
1 raboteur inférieur 8000 tr/mn
Presseurs supérieurs entrée rabot pneumatique
Hsn93jn
Table en acier traité
Entrainement dans la table (réglables)
Table d’entrée : 2m
Cabine d’insonorisation (éclairage)
...