Used Plastic Bending Machine for sale (85,811)

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 20.0 mm Pre-bending: 15.0 mm CNC control Upper roller diameter: 350 mm Middle roller diameter: 330 mm Side rollers diameter: 240 mm Hardened rollers Conical bending device by tilting both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t Njdpfx Ahsx Dtt Ae Uelk The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear condition appropriate for its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t ja Nlsdpjx Ni E Ijfx Ah Uok

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° Nljdpfxjtr U Hle Ah Uok → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: new, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm Nlodpfxsw U U Udo Ah Uek engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Year of construction: 1982, condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Nodpfx Aek Iymxoh Uolk Rolls adjustment motorized Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Machine in Good Condition Undercurrent Demonstratable .

Condition: used, Swing Bending Machine RAS Type 64.25 Serial No. 112/10 Year of manufacture: 1987 Working length: 2540 mm Max. sheet thickness: 2.5 mm at 400 N/mm² Upper beam stroke: 210 mm Adjustable bending beam: 30 mm Back gauge: 6 to 1550 mm Compressed air requirement: 5 bar Back gauge motor power: 0.38 kW Upper beam adjustment motor power: 1.1 kW Nlodpex Hkfdjfx Ah Uek Bending beam motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - One-piece sharp rail 135° - Bending angle and back gauge controlled via RAS control, Type Multibend 2000 - Back gauge (travel 500 mm) - Back gauge with pneumatically actuated fingers at 500 / 1000 mm, fixed stop fingers at 1500 mm - Electric foot switches - Bending beam drive via geared motor and gear drive - Electrical schematic available Space requirement (L x W x H): 3330 x 1850 x 1300 mm Weight: 2000 kg Good condition

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Nsdpfexyvx Tjx Ah Uslk Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: reconditioned (used), functionality: fully functional, control type: manual, degree of automation: manual, actuation type: electric, Equipment: foot remote control, Used, fully overhauled rebar bending machine by a former Peddinghaus employee, 32 KA, 3 bending angles Nlodex I Sqqjpfx Ah Uek

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" Nodpfx Ahettah Re Uelk → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Brand:CASANOVA Model: PCV 35- 3 RODILLOS Descritción • Capacity 3050 x 20 mm • Voltage 400v/50h • Weight 15000 kg Nlsdpfjvx A Amjx Ah Usk

Condition: new, tube diameter 33,7 x 3,4 GAS mm Nledpfxoxab E Se Ah Ujk tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h Njdsxpqy Depfx Ah Uelk - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Nlsdpfx Aex Ii Hvsh Usk Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: reconditioned (used), functionality: fully functional, bending angle (max.): 8 °, type of input current: AC, input voltage: 380 V, overall weight: 400 kg, construction width: 800 mm, Rebar bending machine. Completely overhauled by former Peddinghaus employee. Invoice with VAT. Nledpfxox I Sqds Ah Ujk

Condition: good (used), Year of construction: 2008, Technical Data: Working width: 1030 mm Nlodpfx Ahjx Nntko Usk Max. bending capacity for mild steel St40: 10.0 mm Upper roller diameter: 170 mm Number of driven rollers: 2 Electric drive Mobile control panel Manual swing-out of the upper roller CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 2700 x 1200 x 1300 mm Net weight: approx. 2.8 tons The seller accepts no liability for typing or data transmission errors. The machine is in condition in line with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can operate horizontally or vertically Nledexgukujpfx Ah Usk Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Nsdpfx Aox Iitieh Ujlk Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Nedow An Uhopfx Ah Uslk Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working width: 4050 mm Nsdpfx Ahjwkaals Uslk Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical data: 2 rollers hydraulically adjustable 3 rollers driven Bending moment: 110 cm/3 Shaft diameter: 180 mm Nledpot Ukqajfx Ah Ujk Roller diameter: 460 mm Main motor power: 15 kW Digital display Dimensions (length x width x height): approx. 2000 x 1700 x 1600 mm Weight: approx. 6.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 2002, condition: excellent (used), Technical data: working width: 3550 mm max. bending capacity: 42,0 mm max. bending: 35,0 mm CNC control diameter upper roller: 480 mm diameter 2nd top roller: 540 mm diameter lateral side rollers: 480 mm diameter middle bottom roller: 480 mm conical bending device by inclination of the two side rollers mobile control panel with digital display hydraulic folding bearings own weight: approx. 44 tons Nsdpfx Ahsittzfs Uolk additional equipment: lateral bending aid swiveling bending aid on top additional top roller The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings CE mark Nljdpfowdwiqox Ah Usk Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Nledpfx Ahswchn Uo Ujk Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Njdpfx Asv Htnieh Uolk Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Nlsdewchplspfx Ah Usk Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Accessories: Side hydraulic bending aids