Used Plastic Pipe Welding Machine for sale (69,592)

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Bwsdpfx Ajn D Hczea Nei Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition Bsdoyi Hrwspfx Aa Nswi

Condition: refurbished (used), functionality: fully functional, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 8,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Parweld XTT202P ACDC – Gas-cooled TIG welding machine Bjdpjyi Ubysfx Aa Njwi 3 Months Warranty Refurbished, tested, and ready-for-use Suitable for: Daily ACDC welding work under 5mm, hobby, DIY, novice professionals. Not suitable for: Production welding, machine construction, construction above 5mm Specifications: • 200 AMP • 230 Volt • ACDC • Pulse • 2/4 stroke • Gas before current / Gas after current • Start current / End current • Up slope / Down slope • AC Balance / AC Frequency • Pulse Frequency / Bi level • Electrode option Includes: 8 metre PRO26 welding torch, earth cable with clamp, gas hose, and trolley. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), - Capacity 100 kVA - Pneumatic - Throat depth 570 mm - 380 V Bwedoykcnqopfx Aa Nei

Year of construction: 2016, condition: ready for operation (used), An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible. Bwjdjynatrjpfx Aa Noi

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Bwedpfx Aaol Smn So Nsi Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3" (see photos) -Transport dimensions: 1140/1045/H1200 mm Bjdpfxex Nfhrj Aa Nowi Total weight: 389 kg

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* Bodpoxrb Tgjfx Aa Nowi * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Configuration: Pneumatic - Power [A]: 450 - Power [kVa]: 50 Bwsdpfx Aswyktnja Nji - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1995, condition: used, 1 used well preserved water cooled inert gas welder MIG-MAG Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / special features: - water cooling - separate wire feeder ARTEC DV-W1 with 4 rolls wire feeder - incl. hose package, pressure reducer and ground cable Bwedob Nd E Repfx Aa Nji Further technical data see pictures! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Bodoyhq A Rjpfx Aa Nswi Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on Bwjdpfeq H Aqxsx Aa Noi - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 425-00030/11, Soyer Stud Welding Machine Bodpfx Aaoyn Dx Es Nswi Automatic stud feeder and SOYER BMS-10P-KU welding unit, including equipment. One head is equipped with lift-welding function, up to M12. Technical Data: - Threaded studs M3 - M8 up to length 40mm - Studs Ø3 - 8mm up to length 40mm - Welding sockets IG M3 - M6 Max. Travel Distances: X: 800mm Y: 1030mm Z: 150mm Defects: - Digital display for lift block 2 no longer functions (no functional limitation) - Spray unit head 2 is clogged (can currently be operated manually only) (nozzle needs to be cleaned/replaced)

Condition: excellent (used), Year of construction: 1999, Welding machine make DALEX Type:VARIO MIC 400L year 1999 in very good condition, little used. Bedpfxjfgvvao Aa Nowi

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Bsdpfx Aajugv S Sj Nowi

Condition: used, machine/vehicle number: 73947, Spot welding machine NimakPMP5/35 Welding power: 35 kVA, connected load: 83 kVA Bsdpfeyl Acqox Aa Njwi

Condition: used, Spot welding machine type POU 33, connected load 40 kVA, no. 445 Bsdpfxjyl Ab Tj Aa Nowi

Condition: used, functionality: fully functional, input voltage: 380 V, electrical fuse: 16 A, nominal power at 50% duty cycle: 4 kVA, continuous power (apparent): 6 kVA, We offer this used IDEAL BAS 20 butt / flash welding machine, year of construction unknown, for sale. Type: BAS 20 Serial number: 18292 Nominal power at 50% ED: 4 kVA Connection power: 6 kVA Idle voltage: 2.8-4 V Maximum upsetting force: 0.25 Mp Welding thickness (steel): 3-50 mm Primary voltage: 380 V Frequency: 50-60 Hz Fuse rating: 16 A Number of steps: 5 Available April 2026 Bwsdex Saxdopfx Aa Nji If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: A500P, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 8,000 mm, welding current at 60% duty cycle: 500 A, welding current (min.): 2 A, welding current (max.): 500 A, Demo OTC A500P – Water-cooled TIG ACDC Welding Machine 24-month warranty Demo Model, Ready for immediate use for manual welding or robotics. Suitable for: Robotic welding, aluminium, steel and stainless steel production welding, heavy construction, machine building. Not suitable for: On location, hobby. Specifications: 2-500A 60% ED 500A 380 Volt AC TIG / DC TIG / AC-DC TIG Pulse Synergistically adjustable Water-cooled 2/4 Step High frequency Pre gas / Post Gas Start current / end current Up slope / Down slope AC Balance / AC Frequency Bodpfx Aajyhdxxo Newi Pulse Frequency Spot welding Programme Memory Electrode option Includes: PRO30 8-metre welding torch, ground cable, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Bsdpfx Aasylpqbe Newi

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator Bedpsym Unzefx Aa Newi - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: ready for operation (used), Migatronic MTE 440 TIG AC / DC welder for steel and alumminium. Water cooling Migatronic CTU 3000. The maximum welding strength is 440 A. Tested by EWM service. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Bodpfjh Ib Idsx Aa Nowi If you have any questions you can contact us by phone. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article can happen and remain reserved. Shipping is exclusively to traders - for private consumers only a pickup is possible.

Condition: new, Year of construction: 2025, Equipment: CE marking, Welding, cutting and cleaning fiber laser machine Bwedpfx Aasw Srtfo Nsi

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Bjdpfxjylbrdj Aa Nowi

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, welding rotator for max. load 1t polyurethane wheels 50,0 mm x 200mmØ Bedpfxjwuzc Aj Aa Njwi workpiece diameter 20 - 800 mm speed-range 80 - 1.600 mm/min foot-pedal availible also for renting