Used Plate Stacker for sale (13,401)

Condition: used, functionality: fully functional, machine/vehicle number: B11401172, Year of construction: 2020, operating hours: 12,020 h, load capacity: 45,000 kg, fuel type: diesel, motor manufacturer: Volvo, turning radius (inner): 9,400 mm, overall weight: 69,500 kg, total length: 11,700 mm, total width: 4,150 mm, Equipment: CE marking, UVV, air conditioning, centralized greasing system, hydraulically sliding cabin, lighting, seat heater, DRG450-65S5 Iedpfjzuda Ujx Aaxjtk

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 28 h, load capacity: 1,400 kg, lifting height: 1,930 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, fork length: 1,200 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Iedpfezuhh Aex Aaxjtk Battery year of manufacture: 2021 Description: Fork spacing (outside to outside): 430 mm

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,685 h, load capacity: 1,400 kg, lifting height: 2,844 mm, fuel type: electric, mast type: simplex, construction height: 1,800 mm, drive type: Elektro, High-lift pallet truck Mast type: Standard Condition: Ready for use and fully functional Technical condition: New Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Battery voltage: 24V Battery type: PzS Iodpfx Aozuhhvsaxjtk

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 806 h, load capacity: 1,200 kg, lifting height: 4,309 mm, fuel type: electric, mast type: simplex, drive type: Elektro, High-lift pallet truck Load center: 600 Itodszuhhpopfx Aaxsk Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2018 Battery condition: 80 - 100%

Condition: used, functionality: fully functional, machine/vehicle number: B11401528, Year of construction: 2021, operating hours: 11,569 h, load capacity: 42,000 kg, fuel type: diesel, motor manufacturer: Volvo, turning radius (outer): 9,400 mm, front tire size: 18.00 x 25, rear tire size: 18.00 x 25, overall weight: 65,500 kg, total length: 11,200 mm, total width: 4,150 mm, Equipment: CE marking, UVV, air conditioning, centralized greasing system, hydraulically sliding cabin, lighting, seat heater, DRG420-60S5E Ijdozucxvspfx Aaxotk

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Itodpjd Eqg Hjfx Aaxek Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,716 h, load capacity: 2,000 kg, lifting height: 4,200 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Rear tire type: Polyurethane Itjdpfx Aey Tcv Ujaxek Battery voltage: 24V Description: Price includes a new UVV inspection, new paint job, and a new battery which will be ordered upon request. A suitable charger with plug is included. We would be happy to arrange cost-effective transport for you. We are an official Jungheinrich partner. A lease-purchase option is generally available! Full free lift, CE certified.

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 1 Plate thickness 400 mm weight of the machine ca. ca. 14 t Itsdpfx Aev Ey Nqjaxsk dimensions of the machine ca. 8 x 3 x 0,4 m This plate has 10 t- slots in length direction each 32 mm wide.

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm total power requirement 0 kW weight of the machine ca. 5,2 t Ijdpfx Asftfcweaxstk dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring Isdpfx Asznnd Rjaxetk machine. Size is 2750 x 1400 x 340 mm.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm Itjdpfxet Tqkde Aaxek throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes. Ijdpfxoww Ncco Aaxotk

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm Itjdpfsxu Nrpox Aaxjk front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: used, Year of construction: 1990, length 4000 mm width 1500 mm table height 500 mm Itjdpfeftfchox Aaxsk total power requirement 0 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,5 x 1 m

Condition: used, Year of construction: 1985, length 3000 mm width 2500 mm number 10 Plate thickness 350 mm weight of the machine ca. 5,14 t dimensions of the machine ca. 3 x 2,5 x 0,35 m 10 pieces T- slotted floor plates with 32 mm slots. Itsdpfjx Avqhox Aaxsk

Condition: used, length n.n. mm width n.n. mm total power requirement 0 kW weight of the machine ca. n.n. t dimensions of the machine ca. n.n. m Some spotting plates in different sizes, without table legs. Price per sqm. We have following sizes: 1500 x 1000 mm Itjdpfx Aoznndwoaxek 1000 x 1000 mm (2 pieces) 1000 x 800 mm 600 x 500 mm 400 x 300 mm 210 x 130 mm round with diameter of 520 mm.

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm Isdpfxjt Tqnvs Aaxetk table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: used, Year of construction: 1980, length 3500 mm width 1750 mm thickness of bolster 260 mm Ijdpfx Aasw U Eiloxotk number 2 St no. of flutes 6 weight 5 t 2 pieces T slotted floor plates with 6 slots, each 36 mm width. All dimensions and price is only for one plate !

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 Iodpfxjzafi Ne Aaxjtk straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 1990, table length 2500 mm table width 1250 mm table height 950 mm total power requirement 0 kW weight of the machine ca. 1,5 t Iodpfx Asftfcdsaxotk dimensions of the machine ca. 2,5 x 1,25 x 1 m plate is heated.

Condition: used, Year of construction: 2009, lifting height: 2,870 mm, fuel type: electric, mast type: duplex, fork length: 1,140 mm, total height: 1,950 mm, total length: 1,960 mm, total width: 850 mm, color: black, Empty weight: 1.270 kg Lifting capacity: 1.200 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 7XL00043 - Type: Stand up stacker - Lifting capacity: 1200kg - Lifting height: 2870mm - Overhead clearance: 1950mm - Fork length: 1140mm - Fork width: 560mm - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: PZS 345 - └ Battery year of construction: 2009 - └ Capacity: 345Ah - └ Battery voltage: 24V - └ Tray length [mm]: 790 - └ Tray width [mm]: 210 - └ Tray height [mm]: 640 - Transport dimensions: 1960mm x 850mm x 1950mm (l x w x h) - Transport weight [kg]: 1270kg Ijdpfx Aajzrmglsxetk - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2016, operating hours: 4,481 h, lifting height: 3,030 mm, fuel type: electric, mast type: duplex, fork length: 1,140 mm, total height: 1,950 mm, total length: 1,750 mm, total width: 800 mm, color: grey, Empty weight: 816 kg Lifting capacity: 1.000 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: F20271G00780 - Operating hours: 4481 - Type: Pedestrian stacker - Lifting capacity: 1000kg - Lifting height: 3030mm - Overhead clearance: 1950mm - Free lift: 0mm - Fork length: 1140mm - Fork width: 560mm - Mast: Duplex - Drive: Electric Itedpfx Aew Hy N Sjaxek - Battery information: - └ Battery year of construction: 2016 - └ Capacity: 200Ah - └ Battery voltage: 24V - Transport dimensions: 1750mm x 800mm x 1950mm (l x w x h) - Transport weight [kg]: 816kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces Isdpfx Aaoyx Hgboxetk • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment Itsdpfoxrgkwox Aaxek • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display Iodpfxjyycqxs Aaxstk • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)