Bolster plate - Plate field

UNBEKANNT / UNKNOWN AP 5500x1890x380

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 196691, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-P300, rotational speed (max.): 6,000 rpm, power: 22 kW (29.91 HP), In good condition Ljdpfjrx R Iqjx Ah Uota

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also Ledpfx Aefg E Hpoh Uota “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, 5tSWF Krantechnik GmbH Ltodjdc A R Topfx Ah Uja

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5831, travel distance X-axis: 7,500 mm, travel distance Y-axis: 6,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 7,500 mm, feed length Y-axis: 6,200 mm, feed length Z-axis: 2,000 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 150 kVA, torque: 45 Nm, controller manufacturer: Fanuc, workpiece length (max.): 7,500 mm, workpiece width (max.): 6,200 mm, workpiece height (max.): 2,000 mm, workpiece diameter (max.): 6,200 mm, workpiece weight (max.): 50,000 kg, total height: 5,500 mm, total length: 12,800 mm, total width: 8,900 mm, table width: 6,200 mm, table length: 7,500 mm, table load: 50,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 28,000 rpm, coolant supply: 8 bar, spindle motor power: 28,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 380 V, type of input current: AC, operating speed: 80,000 mm/s, Equipment: documentation/manual, rotational speed infinitely variable, Table Dimension 6,840 x 4,400mm. Axis Travel 'X'=7,500mm, 'Y'=6,200mm, 'Z'=2,000mm, 'B'=±110°, 'C'=±300°. Lsdpfx Ahsu I Nzre Usta Rapid Traverse 'XY'=85m/min, 'Z'=45m/min, 'BC'=9,000°/min. Maximum Spindle Speed 24,000rpm (28 kW Motor). Spindle Taper HSK 63F. 16 x 2 Position Tool Racks. S/No. 5831 (2011).

Year of construction: 1992, condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 Ltedpfjl Tuvdjx Ah Usa -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1988, plate width 2000 mm plate depth 3500 mm plate height 270 mm weight 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Ledpfx Ahsiiii Ss Ueta

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Ltodsw Sx Agspfx Ah Uea

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Technical data: Dimensions height 1120 mm Ljdpegwxmxofx Ah Usta width 320 mm Groove width 20 mm with - 7 horizontal T-slots used, in good condition

Condition: used, grinding length 4000 mm grinding width 1450 mm workpiece height 1250 mm control Siemens 840 D workpiece weight 11000 kg column daylight 1460 mm table surface area 4000 x 1250 mm table feed 1 - 45 m/min cross rail - adjustment 1250 mm total power requirement 40 kW dimensions of the machine ca. 12,3 x 6 x 4,8 m Equipment/Accessories: - 1 universal grinding support, 7.5 kW Swivel range grinding spindle +/- 110° grinding disc dimensions Ø 500 x 60 mm Vertical adjustment 350 mm with puller - 1 peripheral grinding support, 22.5 kW Ltjdpfx Aewa Dx Deh Uea Grinding wheel dimension Ø 600 x 100 mm Vertical adjustment 150 mm with puller - with 6 magnetic plates arranged on the table - seperate clamping table - various grinding wheels and flanges - Technical documentation

Condition: good (used), Year of construction: 2004, Steuerung: Siemens 840-D Verfahrweg X: 6000 mm Verfahrweg Y: 3000 mm Verfahrweg Z: 1000 mm Verfahrweg W: 700 mm Spindeldurchmesser: 150 mm Spindeldrehzahl: bis zu 2800 U/min Spindelleistung: 51 kW Werkzeugwechsler: 80 Werkzeuge Vertikalfräskopf Ledpfx Ahsxn R Nco Uota CNC-Rundtischgröße: 2000 x 2500 mm Tischverfahrweg V: 1500 mm Tischtragkraft: 25 t 2 Stück Bodenplatten Späneförderer Automatischer Kopfwechsler KF-D4 vertikaler Einachsen-Fräskopf, 2,5° programmierbar