Used Pneumatic Bags for sale (9,275)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders Kfodpfxexf Up Uo Ah Uja - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, functionality: fully functional, Wicona Wicpro Wic Pro Operating pressure: 0.8 MPa Air consumption: 5 liters/stroke Stroke: 30 mm Weight: 70 kg Punching modules: 1x Station 1 2x Station 2 1x Station 3 2x Station 4/5 1x Station 6 4x Alcoa 1x Schüco 299 783 1x Schüco 283 492 1x Schüco 299 445 The four pneumatic hand punches (2x Wicona, 2x Schüco) can be purchased optionally at a reasonable price. #8169 Kfjdpfev I Skljx Ah Uea

Condition: good (used), Pneumatic rivet gun, rivet nut pliers, blind rivet nut clamp, pneumatic riveting tool, blind rivet gun, blind rivet -Compressed air rivet gun Ksdpfx Ahogzhxte Uefa -Application range: 2.0 to 4.0 mm -Dimensions: 275/80/H220 mm -Weight: 1.3 kg

Condition: used, functionality: fully functional, DUNKES Pneumatic Press Kfedpfx Ahsxunnpj Uea Machine no.: 935 Pressing force at 6 bar: 4 t Pressing force at 12 bar: 8 t Table size (W x D): approx. 280 x 280 mm Installation height: 350 mm Throat depth: 160 mm Stroke: 140 mm

Condition: excellent (used), Year of construction: 2010, working width: 550 mm, working length: 2,950 mm, working area 2950x550mm 10 arms pneumatic clamps arms adjustable manually Kfodeqfactopfx Ah Uja

Condition: used, Pneumatic Clutch Press Belt Model BREN 160 TN (1323) Liquidation by auction due to end of activity and definitive closure of a used industrial machinery tools company Brand: BELT Model: BREN 160 Frame type: Gooseneck Number of guides: 2 Kfedpfx Ahexzui Ts Uea Main Technical Features Nominal force: 160 tons Stroke: 20 – 160 mm Strokes per minute: 42 Table height to slide: 660 mm Ball elongation: 90 mm Adjustable stroke: Yes Engine power: 12 hp (≈ 8.8 kW) Dimensions Table: 1250 × 610 mm Slide: 850 × 500 mm Table hole: 350 × 350 mm Gooseneck depth: 320 mm Opening between uprights: 395 mm Distance from table to floor: 850 mm

Condition: new, pressure 8,5 kN stroke 40 mm Kodpefv Awasfx Ah Usfa throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Kfjdpju D Tz Usfx Ah Usa Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNG-32-160-PPV-A -Stroke: 160 mm -Piston: Ø 63 mm -Piston rod: Ø 12 mm -Max. pressure: 12 bar -Quantity: 3 pieces available Kfedpfx Ahjw Up Ixj Usa -Price: per piece -Dimensions: 308/50/H50 mm -Weight: 1.0 kg/piece

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D Kedpfx Aep Aul Ash Uofa table size: 996 x 695 mm installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Condition: good (used), Year of construction: 2005, functionality: fully functional, packaging machine Ksdswpx Uxspfx Ah Uefa

Condition: used, Pneumatic Clutch Press, BELT brand, Model 160 TN. (3211) Being liquidated at auction due to cessation of activity and permanent closure of a used industrial machinery dealer. Brand: BELT Model: BREN 160 Frame Type: Gooseneck Number of guides: 2 Kfodpfx Ahjxzuhio Uoa Main Technical Specifications: Nominal force: 160 tons Stroke: 20–160 mm Strokes per minute: 42 Table height to ram: 660 mm Ram extension: 90 mm Adjustable stroke: Not specified (adjustment available) Motor power: 12 hp (≈ 8.8 kW) Dimensions: Table: 1250 × 610 mm Ram: 850 × 500 mm Table aperture: 350 × 350 mm Gooseneck throat depth: 320 mm Distance between uprights: 395 mm Distance from table to floor: 850 mm Overall height: 3360 mm Width: 2050 mm Depth: 1900 mm

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Kedpjfv Av Sjfx Ah Ujfa spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Kodjvcdvpopfx Ah Usfa Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: ARI Foxboro, Pneumatic Control Valve -Control valve: type ARI-Stevi 451 -Spring accumulator: ARI Type 100403429-216 -Positioner: Foxboro, Schneider Type SRI986-BIDS7ZZZNA -Connection: DN50 PN16-25 -Number: 3x control valve available -Price: per piece -Dimensions: 710/300/H270 mm -Weight: 31 kg Kjdpfsq Nqxzjx Ah Uofa

Year of construction: 2022, condition: new, pneumatic tapping arm Model: R1950-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-027 Power: M3-M27 Speed (rpm): 70 / 220 Kjdsipmr Iopfx Ah Uefa Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Ksdow Aqamopfx Ah Uefa Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) For more information, please contact us by e-mail. We operate 24/7.

Condition: used, Eccentric press with pneumatic clutch. ARISA 250 brand, table size 1200 x 800 mm, model G 250 TN (5383) To be liquidated by auction due to end of activity and permanent closure of a used industrial machinery dealer. Kedpsxzdh Eefx Ah Usfa Brand: ARISA Model: G 250-1200-800 Frame: Swan Neck Nominal force (ton): 250 t Stroke: mm Shut height: 600 mm Slide adjustment: 300 mm Table dimensions: 1200 x 800 mm Plate thickness: Distance between uprights: mm Safety: Machine fuse Machine weight: 32,000 kg Height above floor: mm Ram dimensions: 1200 x 800 mm Number of strokes per minute: 30 Cushion force: 5 bar, 500 kN Cushion stroke: 150 mm Main motor: 25 HP Ram adjustment motor: HP

Condition: good (used), machine/vehicle number: Code: 0168, Code: 0168 Brand: STROMAB Kedpfel Snzvjx Ah Uefa Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction Kodpfx Ahstrpiie Usfa - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic) Kjdpfx Ahexptxpj Uefa

Year of construction: 2023, condition: new, Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Ksdpfx Aheipmpzs Uofa Weight: 18kg Adapter mounting: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 25kg Adapter mounting: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Standard accessories: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Year of construction: 2025, condition: new, functionality: fully functional, Efficient and gentle removal of excess liquid instead of long draining times: The pressure dewatering unit has been specially designed to efficiently remove excess liquid from preserved vegetables as well as pickled or thawed vegetables. The machine is easy to operate and can be handled by a single person. The product to be dewatered, such as canned mushrooms, pickled or thawed vegetables, is placed into the perforated crate. Once the system is started, a plate is lowered onto the product. The product is gently dewatered by applying uniform pressure over this plate. Efficient dewatering and minimal space requirement! The processing of pickled, thawed, or preserved vegetables is simplified and accelerated, as prolonged draining times are eliminated by efficient dewatering through gentle pressing. Due to its compact design, the machine requires minimal space and can therefore be easily integrated into various areas of production. Kjdpfxsxc T Nuj Ah Usfa Adjustable working pressure: approx. 6 bar Dimensions (LxWxH): 700x650x1200 mm Weight: approx. 150 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg Ksdjw Dbw Eepfx Ah Uofa

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Rexroth, standard cylinder double-acting type Stroke: 800 mm -Piston: Ø 40 mm Kedpswxtpcjfx Ah Usfa -Piston rod: Ø 16 mm -max. pressure: 10 bar -Dimensions: 960/50/H75 mm -Weight: 3.5 kg