Used Poland for sale (1,357)

Condition: excellent (used), 363 USED Fortuna KM Automatic Roll Divider and Rounder. TECHNICAL DATA: - Dividing and rounding range: 35-80 g. Rcedpfxey Amc Re Alcsf The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2015, Mobile compressor COMPAIR C115-12 (DLT1303), machine after full service with air dryer (aftercooler). Very good condition. REGISTERED IN POLAND Compressor registered in Poland. Technical data: Rsdpfxjw Rb Aaj Alcecf capacity: 11.5 m3/min; working pressure: 12 Bar; year of manufacture: 2015; engine: CUMMINS; operating hours: 2,988 the compressor is fully operational. net price: 119,500 PLN gross price: 146,985 PLN Below is a link to a video.

Condition: excellent (used), Year of construction: 2008, 123 USED Koenig LAURIN 1000/800 + Mini Rex Futura Line. The line has been overhauled at a Koenig dealership and is ready for operation. Rcsdew Su Dmepfx Alcef TECHNICAL DATA: - Dividing and rounding weight: 25-130 g, - Bread types: round and elongated rolls, - Throughput: 2000-3000 pcs/h, - Sheet stacking: 60x80, 60x100, and 80x100. LABELLING AND STAMPING: - Kaiser roll - Sliced ​​roll (Schnytka) - Poznań roll - Daisy roll EXTERNAL DIMENSIONS (in cm): - height 180, - length 328 (with table open: 383), - width 153 (with the board flap open: 191) The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 295.6 kW (401.90 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,453 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,200 mm, total height: 1,880 mm, warranty duration: 12 months, Watercooled chiller PANASONIC ECOi P WQE1004CA 295.6 kW Cooling capacity: 295.6 kW / 84.05 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410a Dimensions: 2.2x1x1.88 m. Weight: 1453 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS Rsdpfxjwp Duqj Alcscf The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), 146 USED Kneading machine with a removable bowl, primarily for rye dough. TECHNICAL DATA: - Flour capacity: 100 kg, - Dough capacity: 160 kg. EXTERNAL DIMENSIONS (in cm): - Height: 117 cm, - Width: 80 cm, - Length: 100 cm. BOWL DIMENSIONS (in cm): - External width: 71 cm, - Depth: 47 cm. EQUIPMENT: - 2 black steel bowls, - Bowl drive. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Rjdpfjxdktmjx Alcscf The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), 039 USED Chocolate warmer. EXTERNAL DIMENSIONS (in cm.) - H: 25, Rjdpfx Ajvxrrqslcocf - W: 55, - L: 35. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 35 t, operating speed: 10 mm/s, table width: 60 mm, total height: 2,510 mm, overall weight: 3,250 kg, travel distance Y-axis: 590 mm, working width: 1,250 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 Rjdpsv Eam Nsfx Alcjcf X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Rsdpfxov Hp T Uj Alcscf Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Rcjdpev R Dlyofx Alcjf Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Condition: good (used), Year of construction: 2003, 048 USED MHS bread slicer. We have 10 of these slicers. TECHNICAL DATA: - slice thickness 11 mm, Rsdpfx Aljv A Umrococf - power supply 400 V. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN Rcodpfsv Iflpex Alcof • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. Rcjdpfx Asfzq Ryelcjf We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Condition: good (used), 733 USED table, shop slicer. EXTERNAL DIMENSIONS (in cm) - W: 64, - L: 64, - H: 77, 147 (with base) TECHNICAL DATA: - Slice thickness adjustment: 11 mm. - Power supply: 380 V The device is in our warehouse (36-068 Bachórz, Poland). The price is a net price. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. Rcjdpfxjruacro Alcsf

Condition: excellent (used), 747 USED Spiral mixer Eberhardt. The device is operational, after inspection. TECHNICAL DATA: - bowl capacity: 160 kg of dough, - 2 speed, - aluminium bowl. EXTERNAL DIMENSIONS (in cm): - width 92, - length 140, - height 126. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. Rjdpsr Ei Daefx Alcocf The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: repair required (used), 616 USED Canol line for the production of: hamburgers, hot dogs, pizzas, hot dogs, lavash, pinsa, ciabatta. It has the appropriate equipment for the above-mentioned products. The machine requires renovation. EXTERNAL DIMENSIONS (in cm): - L: 970, - W: 100 - H: 193. EQUIPMENT: - sprinkling flour under the dough - cutting station Rcodsncfgdjpfx Alcef - rolling station, pressing (connecting doughs) - grain sprinkling station - guillotine with different cookie patterns to cut out - scrap removal station - sheet stacking station The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Dqz0Jh Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2023, functionality: fully functional, pressing force: 100 t, operating speed: 75 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,450 mm, total width: 1,820 mm, total height: 2,650 mm, overall weight: 7,900 kg, controller manufacturer: Lenze, working width: 3,060 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 6, actuation type: electric, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SafanDarley edge bending machines are innovative and highly efficient sheet metal processing machines from the Dutch manufacturer. Their bending precision and reliability have been highly appreciated by users in Poland and worldwide. The SAFANDARLEY E-Brake edge bending machine features an electric drive. Lenze servomotors, controlled by frequency inverters from the same manufacturer, enable fast and reliable operation of the system for many operating hours. Additionally, the machine consumes electrical energy only during the downward movement of the slide. The slide returns to its original position using the force generated by springs. Even when the machine is idle, it practically does not consume electrical energy because the system does not have a pump, as is the case with hydraulic presses. We estimate that the electrical energy consumption is 70% lower than in conventional hydraulic presses. SAFANDARLEY servo-electric edge bending press, model E-Brake Rsdpjr Ndxqofx Alcjcf Press force: 1000 kN (100 tons) Slide stroke: 300 mm Opening: Q=590 mm Upper beam lowering speed: 75 mm/s Upper beam accuracy: +/- 0.01 mm Maximum speed of the back gauge fingers: 350 mm/s Maximum reach of the back gauge fingers (third point of support, reach in the X-axis): 1000 mm Back gauge range in the R-axis: 150 mm Connected power: 11 kW Weight: 7900 kg Machine width: 4550 mm Machine depth: 1820 mm Machine height: 2510 mm Power supply: 3/N/PE 50 Hz – 400/230 V Servo-electric drive (without a hydraulic system) Power transmission via belts CNC-controlled axes: Upper beam: CNC axes: Y1-Y2 Back gauge: CNC axes: X-R-Z1-Z2 Hydraulic upper clamp: WILA Machine inspection and testing are possible.

Condition: used, functionality: fully functional, fuel type: diesel, axle configuration: 8x2, maximum load weight: 26,000 kg, fuel: diesel, emission class: euro5, Year of construction: 2010, machine/vehicle number: YV2VH80D9AB566699, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, This ready-to-use combination comes complete with: Schmidt Stratos B90-42 PCLN 700 wet salt spreader (9m³ capacity) and Schmidt SNK34 snow plough with 300 cm working width. Low mileage! Vehicle is located in Bogdaniec, Poland. Rcedpfxjx Nn I Ie Alcof

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20-1002, We are the first owner. Used only by 2 seasons. Very good condition. Used with frozen vegetables boxes in temperature 0-5deg C without any problems. Serviced last time in 2024. Dismantled in 10.2025 from the line due to remodeling the production line concept. Rjdpfx Asx Rb E Ajlcocf

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02/112005FC170/SPEC, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We are selling a heating furnace (made for heating of manufacturing plants and warehouses) along with the metal chimney - both in very good and working condition. Still in operation. Available for self-disassembly and pickup in our production hall. Rjdpfx Alox H Nudococf

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Rcedpfx Aeim R A Iolcef Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Rcjdpfx Asin Eu Hslcsf CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 180 kW (244.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 950 kg, input voltage: 400 V, total width: 800 mm, total length: 1,250 mm, total height: 1,680 mm, warranty duration: 6 months, Watercooled chiller York YCSE0181 180 kW Cooling capacity: 180 kW / 51.18 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Hitachi G50ASF-Z (screw) Type of refrigerant: R134A Dimensions: 1.25x0.8x1.68 m. Weight: 950 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Rodpfownrk Rsx Alcjcf

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. Rcsdowzvkhepfx Alcof With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Condition: excellent (used), functionality: fully functional, maximum load weight: 2,500 kg, lifting height: 17,000 mm, Year of construction: 2022, operating hours: 1,522 h, This unit is in very good condition – operated exclusively by our staff. When buying from the exclusive distributor, you are assured of the quality of the machine, as well as guaranteed spare parts and service support. A presentation or rental can be arranged on request. Key equipment details: The M250 model is currently the most popular crane in Poland for aluminium joinery installation above 10 m. It stands out among competitors primarily due to: - More powerful YANMAR diesel engine compared to the popular Maeda mini crane - Fully hydraulically telescoping jib ready for immediate use - Radio remote control as standard (brand: Scanreco, renowned in top-class machines worldwide) - Horizontally extending tracks (in competing models, the tracks extend at a 45-degree angle, which increases the crane’s height at maximum width) - The strongest searcher hook available for the main boom on the market (2000 kg) - Rope reeving attachable to the boom as needed. If the rope block is not required (work with the searcher hook), the end of the rope is secured to the side of the main boom. - Very compact design (all cables and sensors are integrated inside the boom) Redpownd Nlefx Alcocf This listing is for a BG Lift M250 mini crane including equipment: • 900 kg winch (65 m) • Electric motor (single phase – 220V) • Hydraulic jib • Searcher hook (for the jib) • Pulley block (single rope) • Pulley block (triple rope) • White tracks Engine hours (diesel): 11,522 Engine hours (electric): 321 M250/2

Condition: excellent (used), 254 USED whipped cream machine, has a cooling system. Rsdpfx Alox Sqyljcocf The device ready to be viewed is in our warehouse (36-068 Bachórz, Poland) The price is a net price WE SPEAK IN ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.