Used Poland for sale (984)

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Bedpfjxzlqnex Aczjdk Brand SIEMENS Model SINUMERIK 828D Dimensions Machine Length 2880 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm Bedpfx Acjuptmyjzsdk rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: used, Year of construction: 2008, operating hours: 1,005 h, 2008 | Holland-Lift N165-12EL Combistar (16.5 m) | Used Scissor Lift | 1005 hours 📍Location: Poland, Warszawa 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Bdedpfx Aoxy Tf Rsczek 👷‍♂️ Inspected by an independent expert 23 inspection points 20 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Working condition. Weak batteries. Scratches and corrosion present. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38104 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), mileage: 151,400 km, power: 324 kW (440.52 HP), first registration: 07/2013, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 4,300 mm, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 11 m³, Year of construction: 2013, - PTO (Power Take-Off) Scania G440, 6x2*4, Euro 6, combination sludge/high-pressure truck with recycling system, stainless steel tank, year of manufacture 2013 Additional information: Engine: 440 hp Transmission: Opticruise (with clutch pedal) Suspension: Air-air Mileage: 151,400 km Wheelbase: 4,300 mm Emission standard: Euro 6 First registration: 18.07.2013 Electric windows and mirrors Air conditioning Reversing camera Navigation system Webasto (cab heating), engine pre-heater… Last technical inspection at 24,000 km (19.03.2025) Last service at 24,900 km The truck is in good and fully operational condition. Body: Wiedemann & Reichhardt, Super 2000 Remote control, sludge extraction (6,000 liters sludge), Wiedemann KW3000, speed: 1,000 rpm, output: 3,000 m³/h, vacuum: 400 bar (new vacuum pump 2020) High-pressure jetting system with stainless steel water tank (4,500 liters), URACA, Webasto Thermo 300... Operating hours: 2,467 hours Recycler with 4 cyclones Overall assessment: Overall rating (1–5): 4.5 Front tire condition: 60 % Rear tire condition: 80 % Note: All documents for registration in all EU countries available (all from Wiedemann & Reichhardt and Scania). Price: € Stockholm, Sweden For further information and photos, please contact us by telephone or email. We are also available on WhatsApp and Viber. • We speak English * We speak Swedish * We speak Polish * We speak Spanish * • We speak Ukrainian * We speak Russian * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdańsk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices only apply to the purchase of this truck * -----. _____ _____ General information Applications: cleaning, soil drainage, dewatering and recycling Technical information Engine displacement: 12,740 cc Bdodpfjxwylrox Aczsk Driveline AdBlue system: Yes Fuel tank: 300 liters Axle configuration Brakes: disc brakes Front axle: tire size: 385/65R22.5; max. axle load: 9,000 kg; steered; left tire tread: 60%; right tire tread: 60%;...

Condition: repair required (used), functionality: limited functionality, Cup filling machine from Hugart. It was packing 400g cups. Two line machine with an efficiency of 3600 cups per hour. I needs mechanical and electrical repairs. I can sell it as it is, but I can also recondition it and fit with a desired cup format. Details to be discussed. Bsdpfx Aexz Uiasczedk

Condition: used, Year of construction: 2021, 2-axis CNC lathe Haas ST20, year 2021 Turret VDI40 210mm chuck NC tailstock Bedpfx Asx Auybjczodk Chip conveyor included with the machine

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,023 h, General Data Measurements height 2500 mm Dimensions Machine Length 5000 mm Movement X-Axis Movement 3000 mm Z-Axis Movement 178 mm Y-Axis Movement 2000 mm Main Drive Bjdpfx Acexy Tgnezodk Number of axis 3 This 3-axis Flow MACH 3 3020B was manufactured in 2013, featuring a 3000x2000 mm working area and a high-pressure 30 HP HYPLEX Prime pump. It operates at speeds up to 12,700 mm/min and has accumulated 7023 cutting hours. Ideal for precision waterjet cutting, consider the opportunity to buy this Flow MACH 3 3020B waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), CATALOG NUMBER 7774 TECHNICAL DATA - max saw blade diameter: 500mm - spindle diameter: 30mm - top pneumatic hold-down - blade guard - pneumatic blade feed - max cutting height: 160mm - max cutting width: 585mm - main motor: 6.2kW - extraction port diameters: 80, 120mm - table dimensions (L/W): 1180x800mm - table height from base: 895mm - roller tables: 2 pcs - infeed roller table with guide: 1770mm - outfeed roller table with guide: 900mm - roller table width: 585mm - overall dimensions (L/W/H): 5000x1360x1370mm - weight approx.: 500kg ADVANTAGES – manufactured in Poland – original DTR documentation + CE (EU) – 2 roller tables – pneumatic saw blade stroke – used saw in perfect condition Net price: 19,900 PLN Net price: 4,740 EUR depending on the exchange rate of 4.2 EUR Bdsdpfx Acsxl Dycezok (Prices may change with significant fluctuations)

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. Bedpfsxzulzox Aczsdk The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs. Bedpfx Aoxyxnqjczodk

Year of construction: 2020, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 18000 RPM Spindle motor power 5.6 kW Bdedpfx Ajxy Anhjczjk Movement X-Axis Movement 3350 mm Z-Axis Movement 180 mm Y-Axis Movement 200 mm This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), CATALOG NUMBER 7683 Technical data: - Cutter block width: 510 mm - Number of knives: 4 pcs - Maximum thickness of workpiece on thicknesser: 200 mm - Manual table lift - Maximum thickness of workpiece on side heads (3-sided): 100 mm Bdodpfxowtqc No Aczjk From above: - Anti-kickback fingers - Feed (infeed) roller, serrated - Pressure bar - Planing (cutter) block - Pressure bar - Outfeed roller, smooth From below: - Adjustable rollers in lower table: 2 pcs - Guide bar From rear: - 2 side spindles + pressure bars - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 25 mm - Includes 2 cutter heads - Spindle adjustment: right/left - Motor: 2×2.4 kW - 2 feed speeds - Extraction port diameter: 2×100 mm - Main motor: 7.5 kW - Overall dimensions (L/W/H): 1850×1250×1000 mm - Weight: 1080 kg ADVANTAGES: – Made in Poland – 4-knife cutter block – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Specifications: Horsepower: 75 kW Material Of Construction: Stainless steel Number Of Hammers/Row: 96 hammers / 24 rows Type: "U" type hammers Bodpfx Acoxyxndjzjdk

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, Control Unit Brand HAAS Main Drive Spindle speed range 8100 Number of axis 3 Movement X-Axis Movement 706 mm Bjdpoxq Hrxofx Aczjdk Y-Axis Movement 406 mm Z-Axis Movement 508 mm Workpiece Workpiece weight 1361 kg This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. Application Types Milling

Condition: excellent (used), CATALOG NUMBER 7729 Bdjdpsxaprgsfx Aczek TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 litres by Schwarte-Milfor Sp. z o. o. (Poland), type Mieszalnik procesowy. The tank has a working volume of 700 litres and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 °C. The heating and cooling jacket, made of stainless steel AISI 304, has a capacity of 152 litres and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 150 °C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall section 1,200 mm. The tank has a welded dished top fitted with an inspection manway with an internal diameter of 450 mm and nine stub pipes with mounted accessories. The tank has a welded dished bottom head fitted with a central outlet with a NovAseptic valve type NA and two stub pipes with mounted accessories. The machine is mounted on three legs equipped with load cells with a display. The equipment includes full technical documentation from the manufacturer and UDT in Polish. Specifications: Capacity: 830 L Diameter: 850 mm Height: 1,200 mm Type Of Heads: Dished Vertical/Horizontal: Vertical Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Bdodpfexyxm Tex Aczjk Legs/Lugs: 3 legs equipped with tensions cells

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Machine weight 6400 kg Measurements height 2810 mm Measurements depth 2140 mm Main Drive Number of axis 6 Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Bjdpfx Aexyl Nnjczjdk Machine Length 4175 mm This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 1800 kg This SCHÜCO PDG SET was manufactured in 2008. A robust circular metal saw featuring a motor speed of 2800 rpm and a saw blade diameter of 500 mm. Weighing 1800 kg, it is fully functional and has been regularly maintained. Available for viewing under power on site. Contact us for further details regarding this machine. Application Types Bsdpfx Acsxxnf Nezjdk Sawing

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3450 kg Control Unit Brand Schüco Main Drive Spindle speed range up to 18000 rpm Number of axis 4 Movement X-Axis Movement 7530 mm Y-Axis Movement 1180 mm Z-Axis Movement 660 mm Bjdpfx Acexxnggszjdk Additional Equipment Number of clamps: 8 This 4-axis SCHÜCO PBX AL-7200 was manufactured in 2008. It features a large X-axis travel of 7,530 mm, a Z-axis of 660 mm, and a maximum spindle speed of 18,000 rpm. The machine includes an 8-position tool magazine and is capable of machining from three sides, suitable for both aluminium and steel profiles. It comes with a SCHÜCO CNC control system and weighs approximately 3450 kg. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Main Drive Number of axis 3 Movement Y-Axis Movement 250–300 mm Z-Axis Movement 250–300 mm This 3-axis SCHÜCO PBA 3250 was manufactured in 2006. It features a working length of approximately 3250 mm and is capable of processing aluminum and steel profiles. Equipped with a CNC controller and Schüco software, this machine is fully functional and has been regularly maintained. If you are looking to get high-quality milling capabilities, consider the SCHÜCO PBA 3250 machine we have for sale. Contact us for more information. Application Types Bsdexxngaopfx Aczjdk Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Spindle Speed 8100 RPM Bodpfx Acexxdr Ejzodk Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Table Table load 1588 kg Tools Max tool diameter 89 mm Slots in storage 20 Media Internal cooling yes This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 8.5 kW, up to 1780 RPM Bdsdpfxoxxdvds Aczek Stroke 85 mm (20–105 mm) Number of axis 3 Additional Equipment Clamp & stripper units for secure work holding 12 sets of clamps Position clamp ensures firm fixing during hole processing This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2019, operating hours: 3,728 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Spindle Speed 4000 RPM Spindle bore 88.9 mm Number of axis 4 Spindle motor power 149 kW Movement C-Axis Movement 360 º X-Axis Movement 213 mm Z-Axis Movement 572 mm Y-Axis Movement 51 mm Tools Slots in storage 12 Technical Specification Bjdoxxdrxopfx Aczsdk Max. Bar Diameter 64 mm Driven Tools yes This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, Main Drive Number of axis 5 Additional Equipment Smart Abrasive Reserve Tank Included Tank Capacity: 350 kg Tank Pressure: 6 bar Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Bdsdpfjxxdu Tox Aczok Application Types Cutting

Year of construction: 2020, operating hours: 2 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series Oi-TF General Data Machine weight 20000 kg Main Drive Spindle speed range 1800 rpm Spindle motor power 30 / 37 kW Spindle bore 132 mm Tool taper MT5 (built-in) Number of axis 2 Movement X-Axis Movement 350 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 3130 mm Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 775 mm Workpiece drm over support 630 mm Turret Number of turrets 1 Tail Stock Pinol diameter 160 mm Tools Number of station 1 Bdjdpexxdumofx Aczjk Additional Equipment Electric Power Supply Required: 59 / 220 kVA This SMEC SL 4500 L was manufactured in 2020. It features an 18" chuck, a maximum turning diameter of 690 mm, and a machining length of 3,055 mm. The spindle supports speeds up to 1,800 rpm with a motor power of 30/37 kW. It includes a 12 station turret and a tailstock with a MT5 taper. Consider the opportunity to buy this SMEC SL 4500 L horizontal turning machine. Contact us for more information about this machine. Application Types Turning