Used Portable Compressor for sale (3,834)

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Lodszu Al Aepfx Ab Njah Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards Lodpfx Abez Rmvco Njah filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, overall weight: 19 kg, control type: manual, actuation type: manual, fuel type: electric, torque: 5 Nm, cutting height (max.): 305 mm, cable length: 4,000 mm, protection type (IP code): IP55, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Ledpfx Aev Tcuxsb Neah Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) complies with CE standards manufactured in 2025, NEW Lsdpfozx Sr Hsx Ab Nsah

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Laodpfx Aszznqkjb Njh Year of manufacture: 2010 Operating hours: 64,380 h

Condition: good (used), Schneider Compressor 670-270 ST used, including refrigerant dryer Tank volume 270 liters Suction capacity 670 liters/min Ledpfjzzclpex Ab Njah Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Motor power 4.0 kW / 400V Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 513 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Oil-free screw compressor, Atlas Copco ZT55VSD Inverter integrated 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Operating hours: 22,314 h Lodozwdt Tjpfx Ab Neah

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The Laedpfx Aozu Aibjb Neh micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Lodpfx Aboyhpqto Njah Ambient temperature: 3°C/45°C

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate Laodjyk Tg Dopfx Ab Nsh -Number: 2x compressor available -Price: per piece -Dimensions: 380/330/H550 mm -Weight: 91 kg/unit

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type QR 1 2M1 - TFDN-551 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available Lasdpjyk Tplefx Ab Nsh -Price: per piece -Dimensions: 340/330/H480 mm -Weight: 70 kg/unit

Year of construction: 2001, condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor Lasdpeu Huvfsfx Ab Njh -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Condition: used, functionality: fully functional, Ferwood Code: RU0009658 - Manufacturer Code: G-BH12BH1610-7HH36-Z - Condition: Used - Functionality: Fully functional - Weight: 65KG - Dimensions: 120X80X60 - If interested we offer overhaul service, please contact us. Ljdpou H Ib Ijfx Ab Neah

Condition: excellent (used), Year of construction: 2000, volume flow: 1.2 m³/h, KAESER AIRCENTER SM 11 screw compressor Motor 7.5 kW Capacity 1.20 m3/min. Pressure 7.5 bar Lodpfx Absxn Atme Njah THE COMPRESSOR IS FULLY OPERATIONAL.

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm Ljdpfx Absxz Avne Noah -Weight: 56 kg

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Dorin, complete refrigeration compressor cooling unit -Type: UA - K470CS-01 -Power: 3.48 kW / 1450 rpm -Volume flow rate: 23.37 m³/h -Max. operating pressure: 30.5 bar -Quantity: 2 pieces available -Price: per piece -Overall dimensions: 1900/1000/H940 mm Laodpfeif Hunjx Ab Nsh -Weight: 304 kg/unit

Year of construction: 2005, condition: excellent (used), power 11Kw (15hp) max working pressure 8 bar 400V three-phase power supply Lsdpfx Ajiu Ic Ieb Njah 1000 liter air tank

Year of construction: 2000, condition: used, Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg Ljdpfx Aspm Thtjb Neah

Condition: used, Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm Ljdpfxsppdh Do Ab Nsah -Dimensions: 415/340/H440 mm -Weight: 25kg

Condition: new, Year of construction: 2020, functionality: fully functional, Control line kit cpl. incl. screw connection 403574.0 Original Kaeser spare part From stock We are on vacation until 06.01. Your request will be processed afterwards. Laedovkfw Rjpfx Ab Noh Warranty and return is excluded from this advertisement.

Condition: new, Year of construction: 2014, Air filter cartridge 6.1997.0 Original Kaeser spare part Suitable for Kaeser compressors: Lajdpfx Abjvkfxzj Neh CS 75, 90, 120 From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2014, Air filter cartridge 6.1996.0 Original Kaeser spare part Suitable for Kaeser compressors: CS 75, 90, 120 Lasdpfxjvkfx Ij Ab Nsh From stock sale We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2010, functionality: fully functional, Oil separator cartridge 6.2010.0 Original Kaeser spare part From stock sale We are on vacation until 06.01. Your request will be processed afterwards. Lasdpfx Abovkfzio Noh Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Laedovkfzpopfx Ab Njh Suitable for Kaeser compressors: ASK 27/32/35/ From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar -Number: 2x cooling units available Lasdpfx Abjguzr Hj Noh -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg