Used Portable Compressor for sale (3,837)

Condition: excellent (used), Year of construction: 2008, PROD. KAESER TYPE BSD72 Laedpfx Ajz E Hb Tob Nsh S/N 1909 YEAR 2008 POWER (kW) 37 CAPACITY (m3/min) 7 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no

Condition: ready for operation (used), Year of construction: 1999, operating hours: 0 h, PROD. BOGE TYPE SD40 S/N 31412 YEAR 1999 POWER (kW) 30+1.10 CAPACITY (m3/min) 4.30 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 17000 / 51100 FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Lasdpfxsz E Hhto Ab Neh CONNECTION 1 1/2 NEW/USED USED

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP Ljdpfez Duc Njx Ab Noah MAXIMUM PRESSURE: 13 BAR 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual CE declaration of conformity

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Lodpfoz A Tl Tsx Ab Njah Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 230V Dust Extractor with Dust Filter The CORMAK FM300 230V with a dust filter is a highly efficient and mobile dust extractor that combines powerful suction with a modern filtration system. Designed for workshop environments, it is suitable for both professional woodworking facilities and smaller workshops. The use of a 2-micron dust filter makes the machine suitable for applications where clean air is particularly important. Main Advantages of the Machine High extraction capacity – 2,800 m³/h – effective removal of chips, sawdust, and dust from one or two machines simultaneously. 2-micron self-cleaning dust filter – ensures clean air in the workshop and effective retention of fine particles. Stable metal construction – resistant to vibration and mechanical damage. Balanced steel impeller – ensures quiet and vibration-free operation. Compact dimensions and mobility – an ideal solution for workshops with limited space. Quick bag mounting system – convenient and fast replacement of the plastic waste collection bag. Construction and Technology The FM300 230V is equipped with a balanced metal sawdust fan that generates high negative pressure and enables stable operation for many hours. The robust frame made of steel profiles and the solid mobile base ensure structural rigidity and reduce vibration. The suction system is fitted with a Y-shaped connector (2 x Ø100 mm), allowing two machines to be connected simultaneously. The 2-micron dust filter is self-cleaning, which significantly extends its service life and improves filtration efficiency. It is an ideal choice for applications where, in addition to extracting larger waste particles, it is also important to remove fine dust generated during milling and sanding. Precision and Operating Efficiency Operating at a speed of 2,850 rpm, the FM300 230V provides highly effective removal of contaminants, contributing to cleanliness and safety in the working area. Thanks to its 1.5 kW motor and efficient turbine, the extractor maintains consistent suction power even during intensive use. Applications Small and medium-sized woodworking facilities Furniture and model-making workshops Woodworking – saws, jointers, and planers Milling, sanding, and drilling workstations Standard Equipment Metal Y-shaped connector – 2 x 100 mm Metal base with 4 castor wheels Plastic waste collection bag Ljdsz A T T Dopfx Ab Neah 2-micron self-cleaning dust filter Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Specification Value Extraction capacity [m³/h] 2,800 Negative pressure 1,800 Pa Noise level 70 dB Motor speed [rpm] 2,850 Bag capacity [litres] 153 Number of bags 1 Diameter of extraction outlets [mm] 1 x 130, 2 x 100 Dimensions (L x W x H) [mm] 940 x 510 x 1,960 Weight [kg] 64 Motor power [kW] 1.5 Power supply 1-phase, 230 V User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: new, Silent rotary screw compressor FINI K – MAX 1510 New, CE-certified Special warehouse clearance price Direct drive without gears. The screw units and other main components are designed, manufactured, and assembled in our Italian facilities. Soundproofed rotary screw compressor K-MAX-1510 with direct drive for industrial use; Lsdswx Npfepfx Ab Neah Technical specifications: Power: 20 HP Power: 15 kW Pressure: 10 bar Air delivery: 2050 l/min Dimensions: 1000 x 700 x 1000 mm Weight: 247 kg.

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW Laedpfx Abex Ap Hpj Neh -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler Lajdpfxox Dihcs Ab Nsh - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit Laodpfx Abszpxx Is Noh frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: API793297, overall weight: 1,431 kg, power: 37 kW (50.31 HP), pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, type plate available, BRAND NEW UNUSED Here we have a rare opportunity to purchase an 100% oil free air cooled variable speed drive twin stage rotary air compressor. Still on the manufacturers pallet from the factory in Belgium Energy efficient VSD machine Laodpfx Aexbtk Njb Noh

Condition: excellent (used), Year of construction: 2015, COMPAIR C115-12 mobile compressor (DLT1303), fully serviced machine with air dryer (aftercooler). Very good condition. REGISTERED IN POLAND. Lodpsw Rb Aaofx Ab Njah Compressor registered in Poland. Technical specifications: capacity: 11.5 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: CUMMINS; operating hours: 2988. Compressor is fully functional. Link to video below.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ljdpfxey Ecuzj Ab Njah Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2019, output 5,5 kW Max. operating pressure (PS) 11 bar Rated engine speed 2930 1/min voltage 400 V Ledszcfczjpfx Ab Nsah

Condition: good (used), Year of construction: 2019, Kaeser M250 construction site compressor 25 m3/min 10 bar Integrated dryer Battery disconnect switch Diesel engine: Mercedes-Benz Operating hours: 2,205 Ledpfx Ajzb Nf Deb Noah

Condition: excellent (used), Year of construction: 2011, 16768 MANUFACTURER: KAESER Ledpfx Abey Sitds Noah MODEL: SK25 Serial No.: 1015 Year: 2011 Power (kW): 15 Output (m3/min): 2.25 Pressure (bar): 11 Operating hours (DOC/TOTAL): 19238/36933 Frequency inverter: no Built-in dryer: no Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documents: no Connection: 3/4

Condition: as good as new (ex-display), Compressor, rotary screw compressor, high pressure gas compressor, industrial refrigeration compressor, Howden MK1S,Used machine Manufacturer: Howden Compressors Limited Type: MK1S WRViHS/365193/58/028 Ljdpsy Snk Uefx Ab Njah Serial No: N12533 -max. inlet pressure: 2.9 bar g -max. working pressure (outlet): 35.5 bar g -casing design pressure: 42.0 bar g -hydraulic test pressure: 63.0 bar g -max. continuous speed: 2970 RPM -setting: variable volume ratio (Vi setting) -place of manufacture: Glasgow, G52 1BE

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Lsdjy Spnuopfx Ab Noah Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: good (used), Year of construction: 1994, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h Laedpfsy Dgmljx Ab Njh -Weight: 1200 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 90 kW Ljdpfx Aboy A Nwke Njah 7.5 bar 16.87 m3/min Year of manufacture: 2015 Operating hours: 65,031

Condition: excellent (used), We have a selection of high-quality refrigeration compressors from Bitzer and Dorin immediately available. Ideal for industrial, refrigeration, and air conditioning applications. Item No.: Kühl 016 Manufacturer: Bitzer Type: 4JTC-15K-40P With oil level monitoring EMERSON OM4-120 Semi-hermetic Refrigerant R-744, CO² for transcritical applications Displacement: 9.2 m³/h Max. overpressure (ND/HD) 75/130 bar Stock: 2 units Item No.: Kühl 018 Manufacturer: Bitzer Type: 4HTE-20K-40P With oil level monitoring EMERSON OM4-120 Semi-hermetic Refrigerant R-744, CO² for transcritical applications Displacement: 12 m³/h Max. overpressure (ND/HD) 100/160 bar Stock: 1 unit 1 used refrigeration compressor Item No. Kühl 019 Manufacturer: Bitzer Type: 2JHC-07K-40S Condition: used Stock: 1 unit Displacement (1450/min 50Hz) 3.48 m³/h Max. overpressure (ND/HD) 25/53 bar Item No.: Kühl 025 Lodpfx Asyx U Hveb Njah Manufacturer: Dorin Type: CDS301B With oil level monitoring EMERSON OM4-120 Semi-hermetic Refrigerant R-744, CO² Displacement: 4.34 m³/h Max. overpressure (ND/HD) 31/95 bar Stock: 1 unit Immediately available – no waiting for delivery times High-quality brand compressors Prices on request! Shipping possible

Condition: used, Second-hand machine Features and technical specifications: Mobile Laodpfx Abjzk N Ico Neh Motor 1.8 kW Extraction nozzle 160 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter Lodpoz Rmvcsfx Ab Noah forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, overall weight: 19 kg, control type: manual, actuation type: manual, fuel type: electric, torque: 5 Nm, cutting height (max.): 305 mm, cable length: 4,000 mm, protection type (IP code): IP55, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS Lajdpfx Abjv Tcuxe Noh The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Lajdpfxol Dxmfj Ab Nsh

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Laodpfx Abotpct Ns Njh