Used Postmix Dispenser for sale (452)

Year of construction: 2025, condition: new, functionality: fully functional, New unit 12 months warranty Advantages of chilled ice water: + Consistently low dispensing water temperatures + Precise, year-round dough temperature control + Rapid swelling during mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems are distinguished by: + Consistently low water temperatures Fedpfxoivdu Uj Adaepp + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel plate heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall bracket (for models L60 + L100): + €319 net - Machine table (for model L60): + €399 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption at 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2022, condition: as good as new (ex-display), High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); Fjdpfjiky H Sjx Adaspp - Pipe cleaning nozzles; Other accessories on request

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Additional title: Modern brewhouse made of stainless steel, copper-clad Cast wort capacity: 250 hl Fodpfx Adow T St Usaspp Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: ready for operation (used), An automatic carton sealer Siat with fixed format is available. Belt width left/right: 75mm/75mm, conveying speed: approx. 20m/min, working level height adjustment: 500mm-750mm, max. tape dispenser roll diameter: 410mm, packaging capacity: 500-1200 cartons/h. Carton length range: 200mm-600mm, carton width range: 105mm-500mm, carton height range: 120mm-600mm. Machine dimensions X/Y/Z: approx. 2550mm/1100mm/2150mm, weight: approx. 350kg. An on-site inspection is possible. Fpodpfxexbhhvj Adajp

Condition: good (used), Year of construction: 1987, sheet thickness steel (max.): 22 mm, throat depth: 4,600 mm, Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Fpsdpfx Ajwpkpzedajp Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg

Condition: new, functionality: fully functional, MIKROMOLD desktop injection molding machine It was not used, NEW. It is electrically driven and suitable for individual and series production of small plastic parts. The machine requires small space. Parameters: Closing force: 30kN Piston diameter: 20mm Dose: cca15g Tool: width 75-120 mm, hight min. 80 mm, length 75-120 mm Dimensions: hight 1100 mm, width 310 mm, length 850 mm Weight: 60 kg Heating: 730W Injection molding: max. 700bar Energy demand: 230V; 50Hz Power requirements: 240V; 50Hz Materials used: General plastics + macromelt Control: card PC Machine handling: 7-inch touch screen (HMI) for data entry and status display, two-hand start and emergency button Data management: 40 program saves Material feeding: From a tank on the machine, gravity-fed The manufacturer's complete manual is available for the machine. Fpsdpfx Aexrcq Hedajp Application areas: Due to the incredible versatility of injection molding, it can be found in almost every industry. Automotive industry - one of the largest users Cars contain many plastic parts, such as bumpers, dashboards, door panels, light housings, under-the-hood components (e.g. intake manifolds, tanks), and smaller interior components such as buttons and switches. The use of plastics contributes to reducing the weight of vehicles, which results in fuel efficiency and lower emissions. It is particularly important in the medical and pharmaceutical industries, for the production of disposable medical devices such as syringes, petri dishes, catheter connectors, drug dispensers and diagnostic test housings. Electronics industry - for the housings, connectors, buttons and other precision parts of devices, e.g. plastic housings of mobile phones, laptops, televisions and household appliances. Consumer goods and household appliances - toys (e.g. LEGO), kitchenware, furniture, sports equipment and most garden tools. Housings, handles and internal parts of household appliances such as washing machines, vacuum cleaners and coffee makers. Packaging industry - bottle caps, food containers, buckets, crates and other packaging materials Construction industry - pipe connectors, fittings, switch and socket covers, insulation elements and other profiles. PVC and PP are common in this application area, where durability, chemical resistance and ease of installation are the main considerations. Agriculture - elements of irrigation systems, machine covers, tank and other equipment parts. Corrosion resistance and durability are key here.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. Fsdpfx Adjwy U Nmoaopp The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Year of construction: 2019, operating hours: 1,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 6223, Kiverco Ps122 picking station for sale Machine has the following options - Overband Magnet - Wind shifter (option) - Emergency stop Pull Cord in picking cabin Fpjdpfx Aev Ew N Usdaop - Auto-Grease Dispensers Fitted to Each Bearing - Heated cabin - Hydraulic system for set up - Generator (optional) - Unbraked wheeled site axle

Condition: good (used), CPM 3000 110kW granulator with conditioner and dispenser Fedpfx Aowcdnwedajpp

Condition: used, Year of construction: 2012, Pallet film wrapper Additional title: Pallet film wrapper Max. capacity: 55 pal/h at max. 1600 mm height (standard height 2300 mm) Rotation speed max.: 20 rpm Power: 4 kW Current: 7,5 A Voltage: 400 V Frequency: 50 Hz Weight: 1500 kg Formats: Pallets with 1200 x 800 mm (max. 1200 x 1200 mm, min. 600 x 800 mm) Running direction: right -> left Operation / Control: On-site control box Material: Black steel painted Position: free-standing Base construction: Frame construction bolted to the floor Features: Satellite winder with integrated cover sheet dispenser, Powerstretch film pre-stretching system "S:C:S:P", clamping system "Genesis", protective grille and muting system, safety barriers, pneumatic hold-down device, 2 roller conveyors in the winding area Fjdpfx Aew Tar Sodaepp

Condition: excellent (used), AdBlue refueling truck Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Federp Enmopfx Adaepp Suction and circulation pump: Power: 0.4KW Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), The Nissei NA3348 is the combi soft serve ice cream and milkshake machine for locations with high demand for soft ice cream and large-volume milkshakes. This floor-standing machine is very user-friendly thanks to its 2 separate dispensing outlets. Brand: Nissei Model: NA 3348 Giant Combi Fodjw Ag Dhjpfx Adajpp Delta Horeca Model: 21129 Dimensions (WxDxH): 460x850x1600mm Electrical connection: 400V

Condition: used, Year of construction: 2017, operating hours: 2,000 h, Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. Fpjdpfx Adewa Tnzjajp • We designed our labeling system, in such a way as to guarantee the maximum laying precision, on each type of bottle. Lines B6 Can Be Composed By The Following Machine Parts: 10 place rinsing machines uses water from the aqueduct or recyclable liquid. (In this case you can add a recycling unit consisting of a pump) 5 micron filters and liquid storage tank. 10 place blow molding machines, as an alternative to the rinsing machine, if the bottle cannot be wet before filling. The blowing machine allows you to blow prepared air or nitrogen inside the bottle. 10 nozzle fillers. Depending on the type of product. Different types of filling can be used and specifically:  Vacuum in the bottle; (for oils, syrups, spirits or when you want a quick filling). By gravity, with initial slight depression (for wine or foamy liquids). Pressure (for PET bottles or for particular liquids). Automatic washing system inside the filler – Used filling monoblock POLARIS Leveler: which allows obtaining the legal content, It is possible to change the bottle format without changing the nozzle thickness. Capper that can apply various types of caps: screw, pressure, mushroom and Guala etc. To change the type of cap, it is necessary to change a capper accessory. Heat shrink or foil capsule dispenser. For the restriction of the retractable capsules, a restriction stove equip the line for the closure of the foil capsules, and mount rolling heads. Labeling machines for the application of self-adhesive labels on the front, back on the neck or other parts of the bottle. Operational heads for the application of fiscal seals both with paper and glue and self-adhesive L to U, side. Thermal transfer stamp for printing dates of reads and lot numbers on the back label or an ink jet marker, laser, can be applied. Accident prevention protections according to CE standards with doors or electronic barriers. All materials in contact with the product are for food use as per CE regulations. In addition, you can add other equipment to carry out further operations, such as: Equipment for other types of caps.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Fpsdpfxoibx S Ne Adaop Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: new, functionality: fully functional, mileage: 5 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 400 mm, emission class: euro6, color: white, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, Manufacturer's warranty Equipment Twin tires Seats: 3 AdBlue Color: white Loading space length: 4,200 mm Loading space width: 2,200 mm Loading space height: 400 mm Mud flaps Floor mats Diesel particle filter (EURO 6d/Green environmental badge) ABS, ESP, ASR Driver's airbag USB / AUX Multifunction steering wheel Power steering Center armrest Full-size spare wheel Fire extinguisher Cruise control Exterior mirrors electrically adjustable and heated (extra long) El. Window lifter On-board computer Seats: fabric, black Central locking with remote control Air conditioning DAB radio with Bluetooth function Hands-free system Underrun protection for cyclists Lockable tool box Roof & side wind deflector Tool box Water tank & soap dispenser Reinforced design front & rear axle Long wheelbase Side marker lights in LED LED lights 8 attachment points for fixing ACCESSORIES - (OPTIONAL FOR ADDITIONAL CHARGE) Rear view camera Air suspension rear axle Trailer hitch Various load securing rails Our services at a glance -You get individual financing and leasing offers, if desired also without a down payment. -You get tested quality from our workshop. -We will pick you up from Paderborn main station free of charge. -You get your vehicle delivered to your doorstep nationwide at a fair price. -We organize the registration of your vehicle for you. -We organize export declarations and export license plates for you. -We will take your current vehicle in part exchange at a fair price. Fodpfsw Rvfcjx Adaopp The information provided on the Internet is a non-binding description. It does not represent guaranteed properties. The seller is not liable for typing and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: new, SHIPPING AVAILABLE 🚚 Fpsdpfxjuxa D Ss Adaop PRECISION CONTINUOUS FLOW METERING AND DISPENSING SYSTEMS (PCF) - Brand: Graco / Ref: PF2410 - 16 style 100-240 VAC cart-mounted PCF system with putty regulator, high resolution meter and DeviceNet user interface - Warranty 1 year

Condition: excellent (used), Hydraulic, Plural-Component, Fixed-Ratio Proportioner. For pouring and dispensing sealants and adhesives and polyurethane foam. Model number: HFRB-16 AKAKDBH Part No: UC0465 Series: H15B Serial No: N102 Fjdsixzuzspfx Adaepp Max motor WPR: 83 bar Max outlet fluid WPR: 206 bar Max air WPR: 7 bar Max operating temp: 77 deg C Max ambient temp: 50 deg C Weight: 395 kg 2 pieces

Condition: new, Powerful Performance Without Interruptions The Meijer SR750B is equipped with a powerful battery pack and large clean and dirty water tanks of 110L and 125L, allowing you to scrub up to 4,500 m² per hour. This scrubber-dryer can tackle large areas without the need for frequent stops. Water flow and brush pressure are easily adjustable, making it ideal for varying levels of dirt. The innovative 99 cm V-shaped squeegee efficiently vacuums all dirty water, leaving your facility floors spotless and reducing the risk of unsafe situations. Suitable for Light and Heavy Soiling The machine comes standard with 2 white disc brushes, each with a diameter of 39 cm. Facing extremely heavy dirt? Consider using our patented Green Grit brushes for even cleaner results. The Stop&Go system detects when the machine stops during operation and automatically halts water and detergent dispensing. Smart Maintenance and High Safety All parts requiring cleaning after use are clearly identifiable by their yellow color coding. The Meijer SR750B also features convenient indicators for battery and water levels and a fully electric display with diagnostic data. During the design phase, considerable attention was given to various safety features: the machine is equipped with anti-slip wheels, an automatic parking brake, and an emergency stop. Thanks to its high maneuverability and excellent cleaning results, the Meijer SR750B is widely used in warehouses, shopping centers, healthcare facilities, and industrial environments. The Meijer SR750B comes standard with, among other features: - Speed reduction system for cornering, - Easy replacement of squeegee rubbers, - Flexible removable filling hose, - Water level and battery indicators, - Color-coded parts for daily maintenance, - Anti-slip and non-marking wheels. Other Specifications: - Working capacity: 4,500 m²/h, - Battery operating time: 3 hours, - Scrubbing width: 75 cm, - Squeegee width: 99 cm, - Clean water tank capacity: 110 liters, - Dirty water tank capacity: 125 liters, - Number of disc brushes: 2 (Ø39 cm), - Power source: 24V battery, - Maximum speed: 6 km/h, - Brush pressure: 30 - 60 kg, - Drive: Front-wheel drive, - Sound level: < 70 dB(A), - Weight (ex. batteries): 225 kg, - Weight (incl. batteries): 381 kg, - Dimensions: 149.5 x 77 x 132 cm Fedpfjnwnzqjx Adaopp Want to know more? Would you like to learn more about the Meijer SR750B or see it in action? Feel free to contact us—our advisors are happy to help.

Condition: used, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Fodpfevxz Aljx Adaopp Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles.

Year of construction: 2008, condition: excellent (used), Telstar Glove box isolator Dispensing Isolator with the following options: Full stainless steel construction in SS316 3 Gloves 3 wall power sockets 230 Volt (UK plug) Sluice pass box with auto locks Descending bottom with drain and valve light in workspace and sluice 3 x Magnehelic pressure gauge for: sluice , workspace and filter pressure Containment breach alarm Work space L 1300 mm W 640 mm H 800 mm Sluice door opening W 310 mm H 520 mm Fpjdepvhkpepfx Adajp Built in filtercartridge Built in exhaust fan (frequency controlled) Exhaust pipe 100 mm with flange 230 mm Power 400 V 3 fase+N On stainless steel frame with casters Fully tested and in excellent condition

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min Fjdpjtp Df Hefx Adajpp • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2007, Palletiser Solema Cartesio Year: 2007 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor Fedpfx Ajvcmxyedaopp - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: used, Year of construction: 2000, Used doy pack filling machine Bossar B 2500 Introduction and Structural Composition Fjdpfx Aevgubqodaspp In the landscape of technical solutions for packaging, the used Bossar B 2500 doy pack filling machine emerges as an advanced piece of equipment, thanks to its construction features and high-level functionality. Starting from its configuration, the Bossar B 2500 is a horizontal machine, specifically the B2500 L/STU-1 model. This designation is not accidental but indicates its ability to operate with a horizontal arrangement, fundamental for certain types of packaging and to maintain consistent production efficiency. This filling line works in various formats, from 200ml to  1l. A crucial part of its architecture is the choice of stainless steel for the entire base of the automatic machine. This not only provides significant corrosion resistance but also a rigid and robust structure, which is indispensable in an industrial environment where equipment durability and resistance to various mechanical stresses are essential. Sensing Technology and Power System of Used Doy Pack Filling Machine Bossar B 2500: The Used doy pack filling machine Bossar B 2500 integrates an advanced sensing system, the photo sensor, which plays a vital role in ensuring precision during the filling process. Its function is to verify the correct position of the packaging material, preventing errors that could lead to waste or production defects. This technology represents a qualitative leap compared to traditional methods, offering greater operational reliability. In tandem with the sensor, we find the exit conveyor belt. This component is no less important, as it manages the flow of consumables through the machine, ensuring that there are no interruptions or malfunctions that could compromise the entire production cycle. Its presence is further testimony to the technical sophistication of the Bossar B 2500. Versatile Dosing Systems and Applications Continuing the examination, we reach the heart of the filling process: the dosing system. This system, in particular the piston dispenser, is calibrated to deliver a precise volume of product in each cycle. This ensures consistency of dosage and integrity of the final product. The dispensing nozzles are specific to liquid products, while the nozzle tips are designed to handle paste products, underlining the machine’s ability to handle a variety of materials. Film edge correction is another technical feature that distinguishes this equipment. This functionality is essential to maintain the correct tension and alignment of the packaging film throughout the entire process. The reason is to prevent damage and anomalies. Conclusion and Final Considerations The Used doy pack filling machine Bossar B 2500 is not just an assembly of mechanical components. It’s the result of years of innovation in the field of doy pack filling machines. It is important to note that Bossar, the original manufacturer of this line, was recently acquired by another company called SIG.

Condition: good (used), Eurolube A11740 Lubrication Pump & Filter Graco LD Series Tank Filling Pump Orion Electronic Oil Dispensers x 2 Fpedpfx Ajt Rgugjdasp Visual Oil Level Indicator Approx. 250 l. Holding Tank

Condition: used, Year of construction: 2009, Used overhauled filling triblock ALFATEK Elvira 16-20-3 year 2009 Initially, the ALFATEK Elvira 16-20-3 filling triblock, created in 2009, stands as a benchmark of engineering excellence for bottling in glass containers. 1. Model Description and Operational Capability Configured for an impressive throughput of 4,000 bottles per hour (BPH), it specifically targets handling 0.75-liter glass containers. Furthermore, the Filling Triblock Alfatek Elvira integrates three main operational modules: the rinser, the filler, and the capper. Each module is meticulously tailored for a distinct phase of the bottling process, ensuring a streamlined operation. 2. Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers, the rinsing system ensures containers are thoroughly cleaned before filling. Consequently, the gripping mechanism is ingeniously designed to handle glass containers with the utmost care, thereby preventing any potential damage. 3. Filling Mechanism Fjdpfovgt H Eex Adaepp Moreover, the filling segment incorporates 20 valves, operating on a high vacuum principle to achieve precise filling. This method not only ensures uniform fill levels across all containers but also allows for efficient dispensing of liquids of varying viscosities, thanks to the selection of fixed nozzles. 4. Capping System Subsequently, the capping unit, fitted with three heads, is adept at applying aluminum screw caps with unparalleled precision. It demonstrates the exceptional versatility of the Filling Triblock Alfatek Elvira in handling various cap types, thus ensuring a consistent secure seal consistently. 5. Safety Measures and Maintenance Protocols Additionally, the Filling Triblock Alfatek Elvira adheres to stringent industrial safety standards, featuring comprehensive protective measures for operator safety. Presently stored under optimal conditions, it is accompanied by a complete set of maintenance manuals. This pivotal aspect is crucial for maintaining the machine’s operational efficiency and extending its longevity. 6. Electrical Specifications and Mechanical Design Requiring an electrical supply of 380 V at 50 Hz is perfectly aligned with standard industrial requirements. Moreover, its clockwise rotational movement is thoughtfully designed for seamless integration into existing production setups, thereby facilitating effortless adoption. 7. Conclusion of the Filling Triblock Alfatek Elvira In conclusion, the ALFATEK Elvira 16-20-3 triblock from 2009 epitomizes advanced engineering, effectively optimizing rinsing, filling, and capping operations in bottling processes. Its technical configuration renders it ideally suited for robust application within the bottling industry, achieving high marks for operational efficiency, precision, and reliability. The meticulous design assures compatibility with a broad range of bottling requirements, securely positioning it as a valuable asset in production environments. Ultimately, the incorporation of transition words aims to enhance the flow and coherence of the analysis, ensuring a comprehensive understanding of the machine’s capabilities.