Used Pouwels Def 100 for sale (23,645)

Condition: used, digital gauge Digibar Rbsdjcf Rb Tjpfx Afbjt is suitable for measuring static and quasi-static fluid and gas pressures. PE 100 is the battery version.

Condition: excellent (used), Bandskimmer Brand Polo filter Bremen Immersion depth maximum 600 mm Band width 100 mm 220 volt Operating voltage 24 volt Weight 11,5 kg Rbsdpfx Asdx E Hcofbjt Shipping dimensions: L. 420 x B. 260 x H. 550 mm

Condition: new, fuel type: electric, Year of construction: 2025, Empty weight: 2.300 kg Top speed: 14 km/h Redpsyaqggjfx Afbobt

Condition: used, mileage: 31,502 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 08/2022, color: white, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, sliding door, = Additional Options and Equipment = - Right-side sliding door - Attention assist system - Automatic dip beam - Heated exterior mirrors - Bluetooth hands-free kit - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Speed-sensitive power steering - Hill-hold control - Wooden load floor - Height-adjustable steering wheel - Air conditioning - Tailgate - Collision mitigation with braking - Multifunction steering wheel - Emergency brake assist - Radio - DAB radio - Rain sensor - Tyre pressure monitoring system - Heated seats - Lane keep assist - Immobilizer - Thermal glazing - Fully digital instrument cluster - Partition wall = Additional Information = General Information Number of doors: 5 Model range: March 2024 - 2026 Cab type: single cab Technical Information Torque: 260 Nm Rbsdpfx Ajya D Evofbot Transmission Transmission: 1-speed automatic Performance Top speed: 130 km/h Dimensions Length/Height: L3H1 Dimensions (L x W x H): 531 x 192 x 195 cm Weights Curb weight: 2,028 kg Payload: 1,027 kg GVWR: 3,055 kg Max. towing capacity: 1,000 kg (unbraked 750 kg) Battery Existing battery: Purchased Battery capacity: 75 kWh Battery charging: Type 2 Battery rapid charging: Combined Charging System (CCS) Interior Interior: black Maintenance, History, and Condition APK (roadworthiness test): valid until 08.2026 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2013, operating hours: 8,237 h, machine/vehicle number: T783xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 18853 Specifications: - 2013 model. - 25416 km. - 8237 hours. - Central grease. - 783 kw. Rbsdpfxovgy Hfo Afbst - 360 degree camera. - Exhaust in box. - Net weight: 68260 kg. - Loading capacity: 41.6 m3. Description: Terex TR 100 for sale. Owner has 2 identical ones to be sold, only approx. 1000 working hours difference on them. Incredibly efficient machine for mass transfer. Good with steel left in the box. Works as it should. Ready for delivery. HK: 1064 Hours: 8237 Own weight: 68820 Kw: 783 Model: TR 100

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 300 584, overall weight: 8,000 kg, type of input current: three-phase, input voltage: 400 V, power: 2 kW (2.72 HP), input current: 85 A, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder - Pusher / compactor - Electrical control cabinet - Overband magnet - Sampler Rbedpfx Afsxrtwwjbot The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: ready for operation (used), Machine type: Spotting press Manufacturer: REIS Model: TUS 160 OK 100 Year of manufacture: 1985 Condition: used Control type: conventional Stock location: 27751 Delmenhorst Country of origin: Germany Delivery time: short-term Freight basis: EXW / ex works Price: Technical details: Press force: 100 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 mm Ram return force: 6,000 kg Rbodpfxeyb Stqs Afbjt Table load: 10,000 kp Total power requirement: approx. 25-30 kW Machine weight: approx. 28 t Space requirement: approx. 2.95 × 7 × 7 m

Condition: excellent (used), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full credentials, including a correct phone number and email address, in order to provide an offer. Milling Machine Macmon M100 (comparable to Deckel FP1) Speed range: 40-2000 rpm Travel X-axis: 310 mm Travel Y-axis: 170 mm Travel Z-axis: 340 mm Tool holder: SK 40 Drawbar thread: S20x2 Table clamping surface: 600 x 215 mm T-slot size: 12 mm Weight approx. 1,120 kg Dimensions: 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine lamp - 3-axis digital readout - Coolant system - Operating manual - Machine feet The machine has been technically inspected and is in good condition. Backlash X-axis: 0.1 mm Backlash Y-axis: 0.1 mm Backlash Z-axis: 0.2 mm Rjdpowu Egxsfx Afbebt Net price ex works, loaded from stock.

Condition: new, Year of construction: 2026, Interbake V-MIX 100 planetary mixer 100 liter with 2 bowls. The very solid construction of the device allows you to work with cakes and masses in the baking and confectionery industry. Thanks to the mechanical system of lifting and lowering the bowl, it is possible to work continuously without removing the tool. The innovative solution of the gearbox allowed for multiplication of the torque, which translates into higher efficiency with lower energy consumption. A very precise arrangement between the tool and the cauldron allows you to knead small amounts of masses, creams, cakes. Rodpfx Afou S Eqbjbsbt Available in 60,80,100 and 120 liter digital control panel stepless regulation - frequency inverter control programming 20 mix recipes programming the time of mixing automatic lifting of the bowl 3 tools included: dough hook wire whip flat beater

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,590 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-curable inks. High-performance production machine for printing on a wide range of materials using UV-curable inks. Ideal for printing on boards and sheet materials such as aluminium composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, as well as cut-to-size films. Even challenging substrates, such as heat-sensitive materials, can be printed with ease thanks to the stepless adjustment of the UV lamps, preventing excessive heat build-up. Integrated, retractable registration pins enable precise and effortless positioning of print media, making accurate series production possible. The printer features highly accurate print control, ensuring excellent repeatability when printing multiple passes (e.g., for 2.5D, relief effects or Braille lettering). Technical data: - 3 Ricoh GEN-5 printheads - Print resolution up to 1200 x 1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Lamp intensity continuously adjustable - Print area approx. 2500 x 1200 mm - Maximum material thickness 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum table with 4 independently adjustable vacuum zones - Ink system with 1-litre bottles Redpeyc Nt Rjfx Afbjbt - No chip recognition required (open system) - Power connection: 32A – 380 volts - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The machine is operational and can be inspected at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be offered for an additional charge (not included in the price). Year of manufacture: 2018 – Refurbished 2025* *All ink-carrying components such as ink tubes, filters, pumps, etc. have been replaced. Printheads are used but in flawless condition (see nozzle test printout). All relevant drive components checked and calibrated. €18,900 excluding RIP software €20,900 including current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,982 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-Curable Inks. High-performance production machine for printing on a variety of materials with UV-curable inks. Ideal for printing on sheet and board materials such as aluminum composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, and cut-to-size films. Even challenging materials, such as those sensitive to heat, can be printed without issue due to the stepless adjustability of the UV lamps, preventing excessive heating. The integrated, retractable positioning marks allow for precise and easy placement of print media, enabling accurate series production. The printer features precise print control, ensuring very high accuracy for multiple print passes (e.g. 2.5D, relief, or Braille printing). Technical Data: - 3 Ricoh GEN-5 print heads - Print resolution up to 1200x1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Steplessly adjustable lamp intensity - Print area approx. 2500 x 1200 mm - Maximum material thickness: 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum system with 4 controllable vacuum zones - Ink system with 1-liter bottles - No chip required for recognition (open system) - Connection: 32A – 380 Volt - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The unit is operational and can be viewed at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be provided upon request for an additional charge (not included in the price). Rbodpsyc Nt Dsfx Afbot Year of manufacture 2019 – Completely overhauled in 2025* *All ink-carrying parts such as ink hoses, filters, pumps, etc. replaced. Print heads are used but in perfect working condition (see nozzle check printout). All relevant drive components checked and adjusted. Price: €21,900 without RIP software €23,900 with current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Year of construction: 2008, operating hours: 26,580 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6, overall weight: 4,600 kg, screw diameter: 40 mm, This Battenfeld HM 100/525 was manufactured in 2008. A hydraulic injection moulding machine with a screw diameter of Ø40 mm and injection volume of 251 cm³. It features tie bar spacing of 470 x 420 mm and has been operating for approximately 26580 hours. Currently used with a Battenfeld UNIROB R10S robot for producing polypropylene containers. Net weight is 4600 kg. Contact us for more information about this machine. • Total operating hours: approx. 26,580 h • Current application: Producing PP (polypropylene) containers; currently running with a robot (see Additional equipment) • Injection unit: • Injection volume: 251 cm³ • Clamping unit: • Tie bar spacing: 470 x 420 mm • Number of core pulls: 1 Additional equipment Rbjdpsychvqefx Afbet • Robot: • Manufacturer: BATTENFELD • Model: UNIROB R10S • Year of manufacture: 2007 • Type: Cartesian handling robot

Condition: used, functionality: fully functional, machine/vehicle number: 2006749, Year of construction: 2017, operating hours: 1,041 h, load capacity: 11,000 kg, lifting height: 5,770 mm, fuel type: electric, mast type: triplex, construction height: 3,275 mm, drive type: Elektro, Reach truck Rsdpfoxgmcijx Afbsbt Chassis number: 2006749 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 80V Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, Year of construction: 1978, pressure 100 t stroke 60 mm no. of strokes 60 /min throat 150 mm passage to the back 245 mm dayligth 320 mm table surface area 580 x 400 mm hole in the table 100 mm table height over floor 900 mm ram surface 300 mm Rjdpfx Aoyfwvxsfbebt power requirement 4,0 kW required space 1,1 x 1,4 x 2,0 m SPECIAL OFFER with motoric driven knuckle-joint system, pneumatic friction clutch and brake, manual ram adjustment, fixed table, automatic centralized oil lubrication as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Rodpfx Asx Uqb Isfbjbt Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: ready for operation (used), Year of construction: 1999, overall weight: 70 kg, number of axes: 5, This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machine's power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information. • Voltage: 3PE ~ 400 V • Frequency: 50 Hz • Current: 22 A Rbedpfsyblnuex Afbst • Power: 15 kVA • Control voltage: 24 V

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm Rbjdpfjx S Ea Tjx Afbjt -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Rbsdoyba Szopfx Afbst

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Rodpfsvz S Sijx Afbebt Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: used, Year of construction: 2007, operating hours: 7,500 h, Drilling rig, drilling system on crawler chassis * Welco-Drill * Model WD 100 * Year of manufacture: 2007 * Approx. 7,500 operating hours according to the last inspection report (exact number not identifiable) * Powered by a 4-cylinder Perkins diesel engine with 97 kW / 132 HP * 2 travel speeds * Transport dimensions (L x W x H): 6,500 x 1,970 x 2,800 mm * Weight: 8,500 kg * Crawler undercarriage with steel track and 35–40 mm rubber pads * Track frame dimensions (L x W): 2,650 x 310 mm * Drilling crown rated load: 70 kN, drilling hoist: 9 kN * Pulling force: 65 kN, drill head: 10.6 kN Rbedpjyfk Aljfx Afbet * Last inspection report from 05/2023 incl. measurement results * Documentation available This description does not constitute a binding offer and may contain errors. No guarantee on the accuracy of the information provided. Please also visit our homepage.

Condition: used, Year of construction: 2018, Executed according to FprEN 16770 Tested according to GS-HO-07 testing principles of BGHM Offline filter cleaning with automatic fire extinguishing system The dust extractor is a suction and filter unit for commercial use, designed for installation in the workplace. The dust extractor is suitable for capturing, conveying, and filtering dry wood, paper, or plastic chips and dusts from one or several processing machines. The unit is delivered fully assembled and ready for operation. Consisting of: - Pressure-resistant and pressure surge-resistant housing (>200 mbar) - Suction nozzle with non-return valve - Antistatic filter elements - Jet-pulse cleaning - High-performance radial fan with IE3 efficiency class three-phase motor (arranged on the clean air side) - Exhaust air silencer and air outlet grille - Control unit with CEE plug (phase inverter) - Automatic start control for up to 6 machines (activation via current coils or potential-free contacts possible) - Automatic filter cleaning with runtime addition - Integrated extinguishing system - Painted RAL 9006 Compressed air, prepared on site, must be supplied to the unit for cleaning (connection via NW7 coupling / 6 bar). A water pipe, provided on site, must be connected to the unit for the fire extinguishing system (connection via ½" union fitting, min. 0.5 bar). Technical data dust extractor: - Suction nozzle diameter: 355 mm - Residual dust content: < 0.1 mg/m³ (H3) - Filter area: 26 m² - Cleaning: Jet-pulse automatic with runtime addition (offline) - Volume flow: 10,000 m³/h - Standard application design nominal volume flow: 7,130 m³/h at 20 m/s at suction nozzle Rbjdpfx Afoyfp Srebjt - Negative pressure: 3,000 Pa at suction nozzle at nominal volume flow - Sound pressure level: 72 dB(A) at 1 m away from the unit - Motor power: 15.0 kW - Motor data: 400 V / 50 Hz / 3000 min⁻¹ / IP54 - Dimensions (L x W x H): 3,500 x 900 x 2,400 mm - Weight: 1,020 kg SPÄNEX Briquetting Press Type SHB 70 RS Price: €15,000.00 Transport pipe 110 x 3.2 mm for SHB 70 RS Machine number briquetting press: 2570/2018 Intermediate hopper 1.2 m³ for attachment to the SMU 100 dust extractor, integrated rotary discharger with gear motor, opening for connection to a briquetting press or rotary valve, galvanized finish for stepless adjustment of fan performance to actual demand via variable adjustment of fan drive speed. The frequency converter increases system effectiveness, saves energy, and reduces wear on material and machinery. - Motor power: 15 kW - Integrated PID controller - Automatic energy optimization for maximum motor efficiency, even in partial load range - Integrated manual/automatic switch-over - Startup menu for quick parameterization - Integrated RFI filter according to EN 55011 - 1 B - Synchronization with already running motor - Device design: IP 55 1 pressure gauge for controlling the frequency converter and thus the power consumption depending on the open machine dampers, including connection hose to the pipework Dust extractor SMU control expansion kit BA, 1 pc, consisting of: - Slide valve control for up to 16 machines - 14 current coils - Multi-tone horn with beacon Rotary paddle bulk goods level indicator, 1 pc, in the intermediate hopper of the dust extractor, ATEX II ½ Ex tD A20/21 marking, to indicate maximum fill level and control a conveying system (system-specific) Storage location: Supplier

Condition: used, Year of construction: 1990, total height: 2,300 mm, total width: 1,800 mm, total length: 2,800 mm, Empty weight: 3.500 kg - Year: 1990 - Documentation available: Yes Rodpfxjx Dicme Afbjbt - CE certificate present: No - Serial number: 16090455 - Drive system: CNC - Power [kW]: 16.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 435 - Z-axis travel [mm]: 210 - Table length [mm]: 1570 - Table width [mm]: 500 - Main spindle power [kW]: 3.8 - Options: External cooling - Tools included: Yes - Transport dimensions: 2800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No Rjdjxywkqopfx Afbobt - Serial number: 10340 - Control: Conventional - Table width: 550mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, pressing force: 100 t, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge - Emergency stop Redpfx Afjwfnqzsbobt - 400 V

Condition: used, mileage: 316,423 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, number of seats: 2, Year of construction: 2010, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, + RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #543 Mercedes Benz Sprinter 516 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Unit Installation: Rockstroh Drain Jet 100-2 * PTO from Sprinter * Pratissoli KF3 high-pressure pump * Pressure control automatic * Pressure control and safety valve * 1st hydraulic HP hose reel for approx. 120m DN13 * 2nd hydraulic HP hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000-litre water tank * Bypass control * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED rotating beacons * Various storage options * Vice * Wooden floor with coating, side panels clad in aluminium chequer plate Special equipment: 13-pin trailer socket, 100 Ah battery, additional (reinforced) battery, digital tachograph, 180 A alternator, transmission lock for PTO, rear door (opening angle 270 degrees), PTO 2B with output shaft, parameterisable special module, radio pre-installation, spare wheel with road tyres, spare wheel holder under rear frame including jack, cab seats: comfort suspension seat, driver side, reinforced rear stabiliser, reinforced front stabiliser, sender for auxiliary heating, separation relay for additional battery, preparation for additional heat exchanger, provision for transmission oil cooling, booster heater Rbsdpfxexc S Ato Afbot Additional features: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated indicator, brake assist, braking system with ABS+ASR, roof lining in cab, lockable glove compartment, body/superstructure: standard high roof panel van, child safety lock, fuel tank: main tank 75 Ltrs., continuous bulkhead, load securing/lashing points, headlamp range adjustment, engine 2.1 l - 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, low emissions according to Euro 5 emissions standard, sliding right-side cargo/passenger door, seat cover/upholstery: Lima fabric, cab seats: adjustable passenger seat, Assyst maintenance interval display, heat-insulating glazing, permissible GVW 5.00 t, twin tyres on 2nd/rear axle For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any warranty.