Used Powder Painting for sale (4,910)

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box Ljdpfxofz U Rre Afwsrr • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: good (used), Rittal PS 4806 Baying Enclosure Product Description PS 4000 Baying System Manufacturer: Rittal Baying System: PS 4000 Model: PS 4806 Enclosure frame: 1.5 mm sheet steel Roof: 1.5 mm sheet steel Door: 2.0 mm sheet steel Rear panel: 1.5 mm sheet steel Lsdpfotzbxzsx Afwsrr Mounting plate: 3.0 mm zinc-coated sheet steel Base plates: 1.5 mm sheet steel Enclosure frame: Dip-coated Door, roof, and rear panel: Dip-coated Exteriorly powder-coated, textured paint Color: RAL 7035 4 eyebolts Sheet steel wiring diagram pocket 4118000 Large 19" swing frame 44 U Plinth system as a stable enclosure base Enclosure cooling unit SK 3296100 Dimensions (HxWxD) 2500 x 800 x 600 mm Find more items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2026, Powder coating booths, sizes defined by customer, Lredpfx Aoizw Hyjfwsr Additional equippment possible.

Condition: new, Brand new PERRYmix model from HVP 50 to HVP3000 stainless steel conical mixer for gentle powder mixing: - Working volume from 50 to 3000 litres. - Indoor and outdoor enviroment without explosion hazard. - Pressure inside the vessel atmospheric. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator suppported by bottom pintle bearing (hard metal), adjusted for quick removal of the screw. - Inner surface grinded / outer surface bead blasted. - Manualy operated rotary slide outlet valve with conical discharge. - FDA gearbox and arm fillings. - Mounted on lugs. Drive: - Separate drives for the auger and arm provide greater protection against overload. - The screw agitator is driven by electric motor via NORD gearbox. - The arm is driven by electric motor via NORD gearbox. Lsdpfxjp H Uaqo Afwerr Material design: - Parts in contact with the product to be mixed made of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, semicircular vessel covers, outlet and hopper). - Carbon steel arm - painted with FDA paint. - NORD gearbox made of carbon steel - panted RAL 7031 Options: - All stainless steel arm. - Tilting half-circle top cover with locking. - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of conical mixers with stainless steel arm and tilting half-circle top cover)

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING Ledpjvv Rfksfx Afwsrr As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: excellent (used), functionality: fully functional, drying rack for drying parts after painting double-sided Lrodjvcb Ivepfx Afwer length of shelves 780mm maximum distance 2520mm minimum distance 350mm 22 shelves bars covered with rubber mobile construction clearance between bars 115mm

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Lrodpfxegvqz Ie Afwer Container volume: approx. 600 l

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg Lodpfx Ashzbq Tofworr

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. Lredpfxjggx E Dj Afwjr ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge Lredpfshyc Nwsx Afwor j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 540-02 painting robot, serial number IRB0540-02-0087 The ABB Robotics IRB 540-02 (serial number IRB0540-02-0087) is a specialized 6-axis painting robot designed for precision applications such as coating plastic parts, electronic components, and furniture. It is known for its excellent surface quality and high process repeatability. Technical specifications: • Payload: 5 kg handling capacity • Number of axes: 6 • Robot weight: Approx. 240 kg • Mounting options: Floor or overhead mounting • System integration: Uses the S4P robot controller as standard and can be equipped with precision paint dispensing systems. Key advantages of the series: • High finish quality: Specifically calibrated for water-based, solvent-based, and powder coating processes. • Low material consumption: By integrating paint regulators and color change valves, overspray and paint waste can be drastically reduced. • Flexibility: Offers a large working area and a compact design, making it possible to coat even complex 3D geometries evenly. Used item – normal signs of wear. "Sample photo. The actual product may vary." Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address. Lrodpszm Hmbofx Afwor

Condition: new, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/55-22,5, wheelbase: 5,140 mm, color: white, = Additional Options and Accessories = - LED lighting - Air suspension Lrodpfx Ajziktkofwor = Remarks = Internal reference number for customer inquiries: 1-497 PAVIC BPA 18E flatbed trailer, offering an excellent price-performance ratio thanks to the use of top-brand components! * Drawbar extendable by 600 mm, continuously adjustable with height adjustment via 2x tension springs * Towing eye ø 40 mm * Tyres: 4x 385/55 R 22.5 premium tyres mounted on steel rims, aluminum rims available at extra cost * Air-suspended axles, 2x 9t; free brand selection by Pavic (SAF/BPW/JOST) * Lifting and lowering system on both axles Loading area (internal): approx. 6,800 mm x 2,440 mm, side wall height approx. 1,000 mm Details: * Side walls made of 25 mm aluminium hollow profiles, foldable with lifting aid * Tailgate foldable and removable, with integrated folding step on the inside * Front wall approx. 1,200 mm high with sheet metal cladding including XL safety certificate!!! * Outer frame with chamfer and lashing holes on the sides and on the chamfer, no lashing rings * Transversely laid plywood floor * Forklift protection, 3 sides (left + right + rear) * Lateral underrun protection on both sides * Toolboxes (optional, at extra charge) * LED lighting * WABCO/Knorr EBS braking system with Roll Stability Program * Chassis coating/painting: KTL with zinc phosphating plus powder, highest corrosion protection (only with powder color availability) or hot-dip galvanized, as desired For further questions, our sales team will be happy to assist you. Financing available through our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Axle configuration Tyre size: 385/55-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,750 kg Payload: 14,250 kg gross vehicle weight: 18,000 kg Functionality Body manufacturer: PAVIC Construction Material Premium Body Condition General condition: very good Technical condition: very good Visual condition: very good

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface Lrodpezi D T Defx Afwsr preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel Lrjdpjy Hm Etjfx Afwer ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: new, Year of construction: 2025, FILTER WITH A MEMBRANE PUMP !!! A bathtub for removing the varnish coat from rims and other objects covered with various types of paints, solvent varnishes and powder varnishes. Basket working dimensions (mm): 1250 x 800 x 700 mm * The bathtub is made of high-grade 304 acid-resistant steel. * Insulated on all sides with 40 mm insulation material, it allows us to efficiently and quickly heat the liquid to the desired temperature. * The shell of the device is made of stainless steel. Ljdpfx Aogwg Haefwjrr Equipment of the device: - Indirect heating (heating mantle), - Automatic temperature control of the heating medium, - Baskets made entirely of stainless steel, - LED indicator lights, - Ceramic heaters in the cover of 2 x 4,5 kW acid-resistant pipes, - Aeration system for the entire bottom of the bathtub, - 12-month warranty. Our devices are made with great care and attention to detail. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology A professional, compact industrial powder coating system designed for serial production and demanding workshop applications. Engineered with a strong focus on process stability, structural durability and premium coating quality. A complete solution ready for immediate operation in professional powder coating facilities. Scope of Supply ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Spray Booth with Filtration System 1400 × 800 × 1400 mm POWDER COATING OVEN — BUMEX INDUSTRIAL STANDARD Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Key Construction Features ✔ stainless steel front frame preventing paint peeling at the door-to-frame contact area — long-term durability and premium appearance, ✔ excellent temperature uniformity thanks to an efficient air circulation system ensuring stable curing without overheating or cold zones, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety locking systems guaranteeing perfect door pressure, chamber tightness and maximum operator safety, ✔ internal loading trolley and external trolley for ergonomic handling, ✔ optimised airflow circulation ensuring repeatable curing quality. Result: fast heating, stable temperature control and perfectly cured powder coating finish. POWDER COATING SPRAY BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow capacity: 6500 m³/h Premium Equipment ✔ construction made from powder-coated galvanised steel panels providing high corrosion resistance, Lodjhd Nraspfx Afwjrr ✔ 2 × 100% polyester filters mounted in TWIST system — fast installation and removal without tools, ✔ automatic filter cleaning system maintaining constant performance, ✔ highly efficient and low-noise industrial extraction fan, ✔ stable airflow ensuring effective powder capture, ✔ ergonomic working area for operator comfort. BUMEX Standard ✔ CE conformity, ✔ full technical documentation, ✔ manufacturer warranty, ✔ warranty and after-sales service, ✔ professional technological consulting. Commercial Terms ✔ own transport — individually quoted, ✔ VAT invoice provided, ✔ customised configurations and dimensions available. BUMEX Sp. z o.o. We design industrial equipment built for long-term reliability, safety and predictable performance.

Condition: new, Year of construction: 2025, Powder coating furnace Working dimensions (mm): 1200 (w) x 1500 (d) x 1800 (h) Nwrin Technical data: • Power consumption: 20 kW. • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us. Lodpfx Aehg Ty Isfworr

Condition: new, Year of construction: 2025, Powder coating oven powered by natural gas. The furnace is designed for polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of AISI 1.4301 acid-resistant sheet metal, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 5000 (D) x 2000 (H) Technical data: • Power supply 400V 50Hz • Riello 90kW burner • Operating temperature 210C Lrsdjh Igq Ropfx Afwer • Temperature max 230C •High-class thermal insulation 150mm Equipment: • Upper transport, • Convection (Equal temperature throughout the furnace, accelerating the heating process of the details), • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at the appropriate level), • The oven is equipped with rails for easy transport. Pvxgim CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2025, TPO0909E powder coating oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Rod for hanging details * Convection (Equal temperatures throughout the oven), * Locks for safe opening and closing, * Maximum operating temperature: 230°C. TQ0906 powder coating booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1,6kW * Air capacity: 3200m3/h, * Hermetic lamp: 1pcs. * Automatic filter cleaning system * The cabin is equipped with a set of pneumatic quick connectors * Cartridge filter: 1 pcs * Paint recovery container Oven, cabin in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. Lodpfsfgnytjx Afwsrr We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions. Please do not hesitate to contact us.

Condition: used, maximum load weight: 13,260 kg, overall weight: 16,000 kg, first registration: 01/2002, loading space length: 7,320 mm, loading space width: 2,470 mm, loading space height: 2,475 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2002, Chassis No. G0124487_1 – Manufacturer: Krone. * Simple corner brackets * Roll-up door (aluminum) * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points Lredjztuknspfx Afwsr Storage container: Weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs needed. Substructure with signs of use, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Dimensions are approximate. Offer subject to change; interim sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: good (used), mileage: 769,876 km, power: 537 kW (730.12 HP), first registration: 07/2018, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2018, Equipment: AdBlue, central locking, cruise control, electric window regulation, fog lights, onboard computer, parking heater, retarder, soot filter, spoiler, = Additional options and accessories = - Rear work lights - Front work lights - Roof spoiler - High beam headlights - Closed cab Lrodpfjzul I Tjx Afwer - Cab - Tilting hydraulics - Alloy wheels - Air-suspended seats - Particle filter - Sleeper cab - Side skirts - Auxiliary heater - Power take-off (PTO) = Notes = Scania ST730 Torpedo / Hauber - Vlastuin - Show truck - Full spec - Custom interior - Special paint Year of manufacture: 25-7-2018 Mileage: 769876 YS2S6X20002142879 Number 3 Vlastuin Torpedo "The Greatest" Full show truck Custom interior and exterior Retarder PTO and hydraulics Navigation system Etc. etc. = Further information = Transmission: Opti Cruise, 12 gears, automatic Suspension: Air suspension Front axle: Alloy wheels; Steerable Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels; Lift axle Number of cylinders: 8 GVWR: 26,000 kg Technical condition: good Optical condition: good

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net Lredpozuxypsfx Afwer + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2026, For sale: various ROTORS from Nozzitec - COLD JET. A-quality. Can also be used on all COLD JET and NOZZITEC blasting machines. We have all the parts in stock for these machines. Contact us. Worldwide shipping. Lsdpfx Aezt U Itefwerr Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET A quality. Also applicable to all COLD JET blasting machines. AERO 30 AERO 40 FP / HP AERO 75 DX AERO 80 FP We have all parts in stock for these machines. Please contact us. Worldwide shipping. Lsdpfx Afoztkv Hsworr Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET. A quality. These nozzles can also be used on all COLD JET MICROCLEAN blasting machines. Lsdpfx Afeztkw Rowjrr We have all the parts in stock for these machines. Contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.