Used Power Generator for sale (48,552)

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Rcedpfx Asfipfujbuoh Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used, but in very good condition.

Condition: ready for operation (used), Year of construction: 2007, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Rcodpfxsvnux Ej Abush Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 41009083, Specifications Type: Automatic band saw for metals Cutting capacity: 410 × 410 mm Cutting at 90°: Ø 410 mm Cutting at 45°: Ø 410 mm Main motor: 8.5 to 8.7 kW Blade speed: 10 to 200 m/min (variable) Blade dimensions: 5940 × 41 × 1.1 mm Power supply: 400 V – 50 Hz (or 460 V – 60 Hz depending on the version) Machine dimensions: 2800 × 2100 × 2150 mm Weight: Approximately 4,000 kg Main features • Automatic hydraulic feed. • Automatic feed rate adjustment according to the material. • Variable blade speed. • SIEMENS control panel with display. • Hydraulic vise. • Chip conveyor. • Part counter. • Bar loader. Rsdpfez Nczwjx Abuoch

Year of construction: 2026, condition: new, functionality: fully functional, Marine Generator set 6 cylinder 100 kva, 123A. made for keel cooling. with DEIF DSE7320 control box and shutdown on low water and oil pressure. 3x400v 50Hz. Brand new. 5 pcs. in stock and renovation kit available. Contact me for drawings with measurements off generator sets or more info. Rjdpfozyckvjx Abuoch 4 Cylinder 75 kva, 108A also available!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, TECHNICAL DETAILS Load capacity: 6,590 kg Load center: 600 mm Lift height: 4,010 mm Overall height: 2,910 mm Rodpfx Abjzrgh Aousch Fork length: 1,800 mm Fork width: 150 mm Fork thickness: 70 mm Fork carriage width: 2,000 mm MACHINE DETAILS Drive type: Internal combustion engine Mast type: Standard Dimensions and weight Dimensions (L x W x H): 3,550 x 2,000 x 2,910 mm Dead weight: 12,270 kg Front tires: Superelastic, 8.25-15 Rear tires: Superelastic, 8.25-15 Operating hours: 16,584 h

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Rjdpfx Aoua Tl Asbuoch Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: used, Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 80 mm, total width: 600 mm, total height: 150 mm, total length: 10,000 mm, conveying length: 10,000 mm, input voltage: 24 V, axle spacing: 80 mm, overall weight: 300 kg, TAF item number: 1000006288.1 Manufacturer: Heber Fördertechnik Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 10,000 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor width in mm: 500 Conveyor length in mm: 10,000 Conveyor height in mm: 150 Roller pitch in mm: 80 Support structure: none Support roller axle type: steel, bolted Support roller diameter in mm: 50 Carrying rollers per axle: 1 Carrying roller material: steel Redpjz Ibzgsfx Abujch Drive: 24V motorised roller Motor specifications: Interroll, 24V, EC310, 0.05, 0.18 Conveyor speed in m/s: 0.6 Net weight in kg: 30 (per linear metre) Condition: used / fully functional Functional test: OK

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Rodpfx Abjbuvbrjusch Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Redpfx Aocdy I Tebujch Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Rcedpfx Aecqy I Sobuoh Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: excellent (used), max. wheel diameter 250 mm gear width 40 mm max. module 6 min. module 1 number of teeth 8 - 100 Rcodpoz Dbzrefx Abujh cone distance 310 mm pressure angle 15 - 30 ° blade cutter head diameter 450 mm pivoting angle 0 - 90 Grad total power requirement 16 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 2,2 x 1,7 x 1,7 m Change gears, chip conveyor, cutting heads, knifes,...

Condition: good (used), Year of construction: 1992, operating hours: 4,510 h, functionality: fully functional, fuel type: diesel, tank capacity: 14,400 l, power: 1,171 kW (1,592.12 HP), output current: 20,000 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, Equipment: CE marking, Energy production unit consisting of three containerized generator sets, featuring a Cummins engine, a Leroy Somer alternator, a 400 [V]/20 [kV] transformer, a 14,400 [L] fuel tank, and a control and monitoring container. Rsdpjz N Hn Ajfx Abuech

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Rsdpfjwgkyhox Abusch Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: new, Flow steam generator with 33 kw/h Capacity: 50 kg/h steam Strom / Volt: 400 capacity / hour ca.: 50 customs no.: 84022000 Rcedpfxez Ri N Se Abujh

Condition: used, This listing is for a Powervar ABCE422-22 UPS Uninteruptable power supply Rsdpjxzg Risfx Abujch

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Rcodpjwxmb Ejfx Abujh Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Year of construction: 2022, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS610 compact / incl. Power-Tiltator / incl. Liebherr Likufix SW48 adapter plate / Year of manufacture: 2022 / DEMO unit / immediately available / excellent condition! Price: €42,690.00 net / €50,801.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic to fully equipped): 830 – 1,060 kg - Recommended hydraulic flow rate: 65 – 110 l/min - Recommended auxiliary flow rate: 40 – 60 l/min - Recommended operating pressure: 230 – 280 bar - Carrier machine service weight: 15 – 20 t - Saw box: active suspension - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. Liebherr Likufix SW48 adapter plate Optional: Electrical connector for Liebherr Likufix SW48 with installation = €1,400.00 net We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55, etc.) and they are immediately available. Our warehouse has a large selection of various Westtech products immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide a financing offer. We are an official sales and service partner for the following brands: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Rjdpfx Asyix I Rjbuech Internal no.: 422060 = Further information = New: No Unladen weight: 1,060 kg Part suitable for: Forestry applications Contact Marius Herden for further information.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. Rsdpfxswzv Hio Abuech An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: Rjdpfxowwt E Us Abujch - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher - Model: J316 - Hours 110k Rcodpfsy S Ttbox Abush - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: used, Power Chuck, SMW Power Chuck Type HFK S 160-45 Serial No. 085009 Outer diameter: 165 mm Inner diameter: 45 mm Threaded connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 7200 rpm Rcsdpfsxcbnfox Abuoh Max. clamping force: 3000 daN Jaw seating: 1/16" x 90° serration Total jaw width, serration with keyway: 35 mm Keyway width in serration: 17 mm - Jaw seating with precision ground serration - 3 pcs. soft top jaws - 6 pcs. T-nuts with mounting screws Chuck weight: 13 kg Good condition

Condition: used, This listing is for One Agilent Keysight E36103ADC Power Supply (More Available) These unit is are all in full working condition and is ready for immediate use Overview: Keysight E36103 Model: E36103 DC Power Supply Output: 20 V, 2 A, 40 W Successor to the older E36103A, which is now obsolete Key Features: High programming accuracy: Voltage: ±(0.05% + 7 mV) Current: ±(0.05% + 1 mA) Ripple & noise: Voltage: 0.8 mV rms, 15 mV peak-to-peak Current: ~1 mA rms Keysight Technologies Readback accuracy: Voltage: ±(0.05% + 5 mV) Current: ±(0.05% + 1 mA) Keysight Technologies Compact form factor: Rcjdpfjxhfcksx Abush 2U ¼‑rack width, compact bench size with 3.7 kg weight Farnell UK Display & controls: High-contrast OLED screen visible from various angles Intuitive rotary knob and front-panel interface for quick digit‑by‑digit adjustments Connectivity: USB and LAN (LXI Core) Supports BenchVue for intuitive control, data logging, and automation Protection features: Overvoltage, overcurrent, and overtemperature safeguards included

Condition: used, This listing is for the Lascar PSU 130 CMD23 Benchtop Power Supply Rcedpfjxhffxex Abueh The unit is in full working condition and is ready for immediate use The Lascar PSU 130 is a compact, single-output benchtop power supply module. It provides an adjustable DC output ranging from 1.5 V to 30 V, with a maximum current of 1 A—ideal for electronics labs or testing environments Specifications include: Wide input voltage range: ~100–240 VAC, 47–63 Hz Built-in over‑voltage, over‑current, and short‑circuit protection, plus excellent regulation with low output ripple Front panel includes a back‑lit digital display for voltage and current, a rotary adjustment knob, and 4 mm output terminals

Condition: new, B&R 0PS3200.1 Power Supply / Power Supply Unit SN: AF651013647 – 3-phase / 24VDC / 20A, unused in opened original packaging (film is still sealed), 100% functional, scope of delivery as shown in the photos. Rsdpfsy Npwqsx Abujch

Condition: used, This listing is for 1 of 11 Invitrogen Powerease 500 Power Supply. The unit is in full working condition and is ready for immediate release. This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Rjdpoxx Afkofx Abujch Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.