Used Pressure Washer for sale (16,338)

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Djdpfx Ais Aibgmszswd Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Dwjdofzrapopfx Aized The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 798 C Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. The highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 650 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 650 Operating pressure [bar]: 30–160 Max. Heating temperature [°C]: 80–155 Connected load [kW]: 4.5 Hose length [m]: 10 Weight [kg]: 96 Dimensions (L x W x H, mm): 940 x 600 x 740 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M Dwjdpj Ah D U Refx Aizjd NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal plumbing.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Dwodpfx Aez Tqwpjized Year of manufacture: 2023 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 210 bar, empty load weight: 175 kg, warranty duration: 6 months, temperature: 98 °C, KARCHER HDS 1000 BE PETROL HOT WATER WASHER Manufactured in 2021 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. NEW 12V 50Ah starter battery. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient HONDA GX390 petrol engine ensures stable operation even during prolonged use. With operating parameters of 210 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Pumping capacity (l/h): 450 - 900 Operating pressure (bar/MPa): 40 - 210 / 4 - 20 Dwjdpfx Aeya Azisized Max. water supply temperature (°C): 80 - 98 Fuel consumption (kg/h): 5.6 Engine type: GX 390 Engine manufacturer: HONDA Weight (kg): 175.7 Dimensions (L x W x H) (mm): 1100 x 750 x 785 EQUIPMENT: NEW 12V 50Ah STARTER BATTERY NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW 10m reinforced steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE HIGHEST FEATURES FEATURES: Open oil system - no operating time limits Highly readable and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 133 kg, input voltage: 400 V, temperature: 155 °C, KÄRCHER HDS 895 HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 900 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) Dedpo Ahq E Sefx Aizewd NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal lines.

Condition: new, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, overall weight: 160 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 10/21-4 M WASHER: Model: HDS 10/21-4 M Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 160 Dimensions (length x width x height) (mm): 1330 x 750 x 1060 Dwodpfjv Tci Nsx Aizsd EQUIPMENT OF THE KARCHER HDS 10/21-4 M WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High pressure hose: Karcher Professional - Longlife series 10M, DN8, 400BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. As standard, the EASY!Force Advance high-pressure gun with a rotating lance, a 10m high-pressure hose, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Dedpfxofz A D Nj Aizowd

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Dwjdpfx Ajflpmqoizsd High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance Dedpfx Aiezh D N Njzswd NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 800 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 695 S HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 5.9 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel-braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Dwsdpfx Aszh Dxwsizsd Built-in cleaning agent tank allows for dosing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 Dwjdpjv Tbbdsfx Aizsd EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow cleaning fluid to be dispensed directly through the machine Highly legible and intuitive control panel Dwjdpfsz E N Enox Aizsd Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, temperature: 155 °C, KARCHER HDS 12/18-4SX HOT WATER WASHER BUILT-IN HOSE REEL The device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4SX Power supply voltage 400V ~ 3 phases Pumping capacity (l/h) 600 - 1200 Operating pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Djdpfjzrw A Djx Aizswd Pressure hose length (m) 20 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - unlimited time Operation: Two built-in chemical tanks allow for dispensing cleaning fluid directly through the machine. A clearly laid-out and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 800 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, Kärcher HDS 695 S Eco Hot Water Pressure Washer New heating coil The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 800 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.9 Detergent tank [l]: 20 Hose length [m]: 10 Dwedpfx Aoz Ainmoizjd Weight [kg]: 130 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 168 kg, input voltage: 1,000 V, KARCHER HDS 10/20-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 10/20-4M Power supply voltage: 400V ~ 3 phase Dwjdpfxezvfl Uo Aized Discharge capacity (l/h): 500 - 1000 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 7.8 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: refurbished (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 49 kg, input voltage: 230 V, fuel: electricity, KÄRCHER HD 6/16-4M COLD-WATER PRESSURE WASHER The unit comes with new accessories, including a high-pressure gun, a stainless steel spray lance, a steel-reinforced hose, and an adjustable nozzle. A durable brass cylinder head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient single-phase motor provides stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 600 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Model: HD 6/16-4M Supply voltage [V]: 230 Flow rate [l/h]: 600 Operating pressure [bar]: 160 Connected load [kW]: 3.4 Weight [kg]: 49 Dwodpfx Aie Ah Exwszjd Dimensions [mm]: 467 x 407 x 1010 Hose [m]: 10 ACCESSORIES: NEW heavy-duty high-pressure gun NEW stainless steel spray lance NEW 10m steel-reinforced high-pressure hose NEW adjustable nozzle Water filter and GEKA quick-connect couplings – INCLUDED FOR FREE KEY FEATURES: Open oil system – no restrictions on operating time Highly... Clear and intuitive control panel The simple design and good access to individual components under the housing make the machine user-friendly and easy to service.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, input voltage: 400 V, overall weight: 155 kg, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 1195 HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 1200 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Model: HDS 1195 Supply voltage [V]: 400V ~ 3-phase Flow rate [l/h]: 1200 Operating pressure [bar]: 180 Max. Water heating temperature [°C]: 98–155 Connected load [kW]: 8.2 Fuel tank capacity [l]: 25 2 chemical tanks [l]: 20 + 17 High-pressure hose length [m]: 10 Weight [kg]: 155 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED (FREE) KEY FEATURES: Dwedpfx Aj Airp Usizod Open oil system – no operating time restrictions Two built-in chemical tanks allow for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and easy to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal lines

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Dwjdpfe Ah Siqjx Aizsd Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, pressure: 170 bar, empty load weight: 121 kg, warranty duration: 6 months, KÄRCHER HDS 9/17-4C HOT - WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 900 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 90/155 Connected load [kW]: 6.5 Fuel tank [l]: 25 Hose length [m]: 10 Deds Aaw R Ujpfx Aizewd Weight [kg]: 121 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED FOR FREE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents via the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal lines.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 119 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, temperature: 85 °C, KARCHER HDS-E 8/16-4M 12kW HOT WATER PRESSURE WASHER The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. The machine has only 299 hours of operation. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Dsdezrxh Ispfx Aizswd Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 760 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Heater power [kW]: 12 Connection power [kW]: 17.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 119 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner Dwedpfx Aijz Duf Rezed -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 118 kg, input voltage: 400 V, KÄRCHER HD 20/15-4 CAGE COLD-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel spray lance, a steel-braided high-pressure hose, and a power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 2000 l/h, this machine is highly effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. Dwsdpe Afnp Sofx Aizod TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Flow rate (l/h): 500 – 2000 Water inlet temperature (°C): max. 60 Operating pressure (bar): 30 – 150 Maximum pressure (bar): 190 Connected load (kW): 11.5 Power cable (m): 5 Weight (kg): 118 Dimensions (L x W x H) (mm): 957 x 686 x 1080 ACCESSORIES: NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced steel-braided high-pressure hose 15m NEW Power Nozzle Water filter and GEKA claw couplings – INCLUDED FOR FREE KEY FEATURES: Open oil system – no operating time restrictions Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and simple to service Large wheels facilitate transport over uneven terrain

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, pressure: 180 bar, empty load weight: 133 kg, input voltage: 400 V, temperature: 155 °C, KÄRCHER HDS 895 VEX HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 1000 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 1000 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Dwodpfxj Ah E S Uj Aizjd Weight [kg]: 133 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA quick-connect couplings – INCLUDED FOR FREE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal plumbing

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 13/20-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 13/20-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1300 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 9.3 Fuel tank capacity (l) 25 Dedpfx Aiozc Emmszjwd Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 195 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.